From: Guy Stalnaker <jstalnak@wisc.edu>
To: alsa-devel@alsa-project.org
Subject: Issues with HP DV4 laptop sound after Ubuntu Jaunty 9.04 upgrade
Date: Sat, 02 May 2009 23:57:42 -0500 [thread overview]
Message-ID: <49FD2446.7040001@wisc.edu> (raw)
Hello again.
I was able to get my internal speakers working for my HP Pavilion Dv4
laptop by following the advice I found in the alsa-devel archives. That
advice seems to have worked for quit a few people who found it by a post
I made to the Ubuntu Forums.
But now, after I have upgraded my Ubuntu from version 8.10 (when sound
worked) to version 9.04, sound no longer works correctly. I have some
detailed information about the sequencing and the specific error.
Attached is an alsa-info.txt output.
Here's what I'm seeing (extracts from dmesg/kernel logs):
Apr 29 15:13:17 Harlindon kernel: [ 19.937190] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 29 15:13:17 Harlindon kernel: [ 19.937270] HDA Intel 0000:00:14.2:
setting latency timer to 64
Apr 30 09:37:09 Harlindon kernel: [ 19.941675] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 30 09:37:09 Harlindon kernel: [ 19.941750] HDA Intel 0000:00:14.2:
setting latency timer to 64
May 1 16:06:01 Harlindon kernel: [ 19.852324] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 1 16:06:01 Harlindon kernel: [ 19.852398] HDA Intel 0000:00:14.2:
setting latency timer to 64
May 1 16:13:43 Harlindon kernel: [ 20.950985] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 1 16:13:43 Harlindon kernel: [ 20.951060] HDA Intel 0000:00:14.2:
setting latency timer to 64
Commit Log for Fri May 1 16:41:58 2009 [Upgrade to Ubuntu Jaunty 9.04]
May 1 17:11:05 Harlindon kernel: [ 20.318416] hda-intel: unable to
grab IRQ 0, disabling device
May 1 17:11:05 Harlindon kernel: [ 20.318517] HDA Intel: probe of
0000:00:14.2 failed with error -16
May 1 17:14:18 Harlindon kernel: [ 22.977762] hda-intel: unable to
grab IRQ 0, disabling device
May 1 17:14:18 Harlindon kernel: [ 22.977828] HDA Intel: probe of
0000:00:14.2 failed with error -16
May 1 17:18:49 Harlindon kernel: [ 21.105013] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 1 17:18:49 Harlindon kernel: [ 21.105087] HDA Intel 0000:00:14.2:
setting latency timer to 64
May 1 21:15:14 Harlindon kernel: [ 19.776991] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 1 21:15:14 Harlindon kernel: [ 19.777893] HDA Intel 0000:00:14.2:
setting latency timer to 64
May 2 09:22:01 Harlindon kernel: [ 20.540543] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 2 09:22:01 Harlindon kernel: [ 20.540619] HDA Intel 0000:00:14.2:
setting latency timer to 64
May 2 09:26:04 Harlindon kernel: [ 19.819578] hda-intel: unable to
grab IRQ 0, disabling device
May 2 09:26:04 Harlindon kernel: [ 19.819677] HDA Intel: probe of
0000:00:14.2 failed with error -16
May 2 10:37:28 Harlindon kernel: [ 20.175934] hda-intel: unable to
grab IRQ 0, disabling device
May 2 10:37:28 Harlindon kernel: [ 20.175999] HDA Intel: probe of
0000:00:14.2 failed with error -16
May 2 13:26:27 Harlindon kernel: [ 20.610591] HDA Intel 0000:00:14.2:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 2 13:26:27 Harlindon kernel: [ 20.610666] HDA Intel 0000:00:14.2:
setting latency timer to 64
May 2 16:57:23 Harlindon kernel: [ 19.885497] hda-intel: unable to
grab IRQ 0, disabling device
May 2 16:57:23 Harlindon kernel: [ 19.885575] HDA Intel: probe of
0000:00:14.2 failed with error -16
May 2 18:20:18 Harlindon kernel: [ 22.605977] hda-intel: unable to
grab IRQ 0, disabling device
May 2 18:20:18 Harlindon kernel: [ 22.606042] HDA Intel: probe of
0000:00:14.2 failed with error -16
What is damned peculiar is that is has sometimes worked (as you can see
above). I can find no pattern however. I HAVE downloaded an compiled
the latest alsa-driver-snapshot. That last reboot has the same unable
to grab irq error.
Any suggestions are greatly appreciated.
--
Guy Stalnaker, I^2@DOIT, 1210 West Dayton Street, Room 3209 CSS, Madison
WI 53719-1220, jstalnak@wisc.edu, work 608.263.8035, cell 608.235.4718,
fax 608.265.6681, page page-guy@watchdog.doit.wisc.edu
next reply other threads:[~2009-05-03 4:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-03 4:57 Guy Stalnaker [this message]
2009-05-04 7:11 ` Issues with HP DV4 laptop sound after Ubuntu Jaunty 9.04 upgrade Takashi Iwai
2009-05-04 15:26 ` Guy Stalnaker
2009-05-05 10:49 ` Takashi Iwai
2009-05-05 13:54 ` Guy Stalnaker
-- strict thread matches above, loose matches on Subject: below --
2009-05-03 4:58 Guy Stalnaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49FD2446.7040001@wisc.edu \
--to=jstalnak@wisc.edu \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox