From: David Favor <david@davidfavor.com>
To: ALSA-Devel <alsa-devel@alsa-project.org>
Subject: Re: No Sound - X-Fi CA0110 IBG - Ubuntu 910 with Kernel 2.6.31-6
Date: Sun, 23 Aug 2009 22:42:21 -0500 [thread overview]
Message-ID: <4A920C1D.7070403@davidfavor.com> (raw)
In-Reply-To: <604760770908231609j6c7245d5vc56e1ba259b9e7d3@mail.gmail.com>
Daniel Chen wrote:
> On Sun, Aug 23, 2009 at 12:06 PM, David Favor<david@davidfavor.com> wrote:
>> 2.6.31-6-generic
> ...
>> Codec: Creative CA0110-IBG
>> Address: 1
>> Function Id: 0x1
>> Vendor Id: 0x1102000a
>> Subsystem Id: 0x11021007
>> Revision Id: 0x100000
>
> Please try the latest alsa-driver stable snapshot.
Looks like something is flaky in how status bits are cleared/read
from the hardware by the driver code.
Definitely time to move on to a card with a working driver.
If I continually reboot my system, say 30-50 times or unplug power
from the wall I get the following, which I'm guessing is suppose to
show up always...
david@home1:~/shell$ ls -ld /proc/asound/card*/codec*
-r--r--r-- 1 root root 0 2009-08-23 22:34 /proc/asound/card0/codec#1
david@home1:~/shell$ cat /proc/asound/card0/codec#1
Codec: Creative CA0110-IBG
Address: 1
Function Id: 0x1
Vendor Id: 0x1102000a
Subsystem Id: 0x11021007
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xa]: 16 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x67, nsteps=0x73, stepsize=0x01, mute=0
Default Amp-Out caps: ofs=0x67, nsteps=0x67, stepsize=0x01, mute=0
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x5: Stereo Amp-Out
Amp-Out caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=4, channel=0
Node 0x03 [Audio Output] wcaps 0x5: Stereo Amp-Out
Amp-Out caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=4, channel=0
Node 0x04 [Audio Output] wcaps 0x5: Stereo Amp-Out
Amp-Out caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=4, channel=0
Node 0x05 [Audio Output] wcaps 0x5: Stereo Amp-Out
Amp-Out caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=4, channel=0
Node 0x06 [Audio Output] wcaps 0x5: Stereo Amp-Out
Amp-Out caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-Out vals: [0x67 0x67]
Converter: stream=4, channel=0
Node 0x07 [Audio Output] wcaps 0x205: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Digital: Enabled Non-Audio Pro
Digital category: 0x0
Node 0x08 [Audio Input] wcaps 0x100103: Stereo Amp-In
Amp-In caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 1
Connection: 1
0x10
Node 0x09 [Audio Input] wcaps 0x10010b: Stereo Amp-In
Amp-In caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-In vals: [0x01 0x01]
Converter: stream=0, channel=0
SDI-Select: 1
Connection: 1
0x11
Node 0x0a [Audio Input] wcaps 0x100303: Stereo Digital Amp-In
Amp-In caps: ofs=0x67, nsteps=0x7f, stepsize=0x01, mute=0
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 1
Digital: Enabled Non-Audio Pro GenLevel
Digital category: 0x7f
Connection: 1
0x13
Node 0x0b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000014: OUT Detect
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0c [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x00]
Pincap 0x00000014: OUT Detect
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000014: OUT Detect
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x0e [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000014: OUT Detect
Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x05
Node 0x0f [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x02214020: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x10 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80]
Pincap 0x00000024: IN Detect
Pin Default 0x01813030: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN
Unsolicited: tag=00, enabled=0
Node 0x11 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80]
Pincap 0x00000024: IN Detect
Pin Default 0x02a19040: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN
Unsolicited: tag=00, enabled=0
Node 0x12 [Pin Complex] wcaps 0x40038d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00000010: OUT
Pin Default 0x01452150: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Grey
DefAssociation = 0x5, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x07
Node 0x13 [Pin Complex] wcaps 0x40028b: Stereo Digital Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x01c51160: [Jack] SPDIF In at Ext Rear
Conn = Optical, Color = Black
DefAssociation = 0x6, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN
Unsolicited: tag=00, enabled=0
Node 0x14 [Vendor Defined Widget] wcaps 0xf00080: Mono
Unsolicited: tag=00, enabled=0
--
Love feeling your best ever, all day, every day?
Click http://RadicalHealth.com for the easy way.
prev parent reply other threads:[~2009-08-24 3:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-23 16:06 No Sound - X-Fi CA0110 IBG - Ubuntu 910 with Kernel 2.6.31-6 David Favor
2009-08-23 23:08 ` David Favor
2009-08-23 23:09 ` Daniel Chen
2009-08-24 3:42 ` David Favor [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A920C1D.7070403@davidfavor.com \
--to=david@davidfavor.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox