From: Logan Li <loganli@viatech.com.cn>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, HaraldWelte@viatech.com, LydiaWang@viatech.com.cn
Subject: [PATCH 17/30] ALSA: HDA VIA: Add 2nd S/PDIF out for VT1708S and VT1702.
Date: Sat, 10 Oct 2009 19:08:25 +0800 [thread overview]
Message-ID: <4AD06B29.8020803@viatech.com.cn> (raw)
From: Lydia Wang <lydiawang@viatech.com.cn>
Subject: ALSA: HDA VIA: Add 2nd S/PDIF out for VT1708S and VT1702.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Logan Li <loganli@viatech.com.cn>
---
sound/pci/hda/patch_via.c | 37 +++++++++++++++++++++++++++----------
1 file changed, 27 insertions(+), 10 deletions(-)
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -107,7 +107,7 @@
/* playback */
struct hda_multi_out multiout;
- hda_nid_t slave_dig_outs[2];
+ hda_nid_t second_dig_out;
/* capture */
unsigned int num_adc_nids;
@@ -1179,8 +1179,23 @@
struct snd_pcm_substream *substream)
{
struct via_spec *spec = codec->spec;
- return snd_hda_multi_out_dig_prepare(codec, &spec->multiout,
- stream_tag, format, substream);
+ hda_nid_t nid = substream->number == 0
+ ? spec->multiout.dig_out_nid : spec->second_dig_out;
+ mutex_lock(&codec->spdif_mutex);
+ /* copy from hda_codec.c: setup_dig_out_stream */
+ /* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
+ if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
+ snd_hda_codec_write_cache(
+ codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
+ codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff);
+ snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
+ /* turn on again (if needed) */
+ if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE))
+ snd_hda_codec_write_cache(
+ codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
+ codec->spdif_ctls & 0xff);
+ mutex_unlock(&codec->spdif_mutex);
+ return 0;
}
static int via_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
@@ -1298,6 +1313,13 @@
if (err < 0)
return err;
spec->multiout.share_spdif = 1;
+ /* add second spdif out */
+ if (spec->second_dig_out) {
+ err = snd_hda_create_spdif_out_ctls(
+ codec, spec->second_dig_out);
+ if (err < 0)
+ return err;
+ }
}
if (spec->dig_in_nid) {
err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
@@ -1472,11 +1494,6 @@
} else /* enable SPDIF-input pin */
snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN);
-
- /* assign slave outs */
- if (spec->slave_dig_outs[0])
- codec->slave_dig_outs = spec->slave_dig_outs;
-
return 0;
}
@@ -3164,7 +3181,7 @@
};
static struct hda_pcm_stream vt1708S_pcm_digital_playback = {
- .substreams = 1,
+ .substreams = 2,
.channels_min = 2,
.channels_max = 2,
/* NID is set in via_build_pcms */
@@ -3400,7 +3417,7 @@
if (!spec->multiout.dig_out_nid)
spec->multiout.dig_out_nid = nid;
else {
- spec->slave_dig_outs[0] = nid;
+ spec->second_dig_out = nid;
break; /* at most two dig outs */
}
}
next reply other threads:[~2009-10-10 11:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-10 11:08 Logan Li [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-10-09 10:40 [PATCH 17/30] ALSA: HDA VIA: Add 2nd S/PDIF out for VT1708S and VT1702 LoganLi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AD06B29.8020803@viatech.com.cn \
--to=loganli@viatech.com.cn \
--cc=HaraldWelte@viatech.com \
--cc=LydiaWang@viatech.com.cn \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox