alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Ringel <stefan.ringel@arcor.de>
To: Takashi Iwai <tiwai@suse.de>, alsa-devel@alsa-project.org
Subject: Re: HD-Audio device unsuppored (Nvidia G2xx-series GPU implemented)
Date: Tue, 29 Dec 2009 09:57:24 +0100	[thread overview]
Message-ID: <4B39C474.70007@arcor.de> (raw)
In-Reply-To: <s5h1vie91qx.wl%tiwai@suse.de>

Am 28.12.2009 23:23, schrieb Takashi Iwai:
> At Mon, 28 Dec 2009 22:34:09 +0100,
> I wrote:
>   
>> At Sun, 27 Dec 2009 17:20:25 +0100,
>> Stefan Ringel wrote:
>>     
>>> I have tested with patch_intelhdmi.c and it works, and I have tested
>>> with patch_atihdmi.c (changing convert nid and pin nid) and it works
>>> also. But I have problems to attach codec #2 and #3.
>>> Next I'm updating patch_nvhdmi.c and testing it.
>>>       
>> Did you test also more than 2 channels?  Each codec looks supporting to
>> 8 channels output, so it might do actually.  But, it might be also
>> separated 4x2 channels.
>>
>> So far, only two HDMI codecs are supported individually.
>> For using these four codecs, we'd need a hack.
>>     
> Something like below...
>
>
> Takashi
>
> ---
> diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
> index 6afdab0..bad7fab 100644
> --- a/sound/pci/hda/patch_nvhdmi.c
> +++ b/sound/pci/hda/patch_nvhdmi.c
> @@ -392,6 +392,136 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec)
>  }
>  
>  /*
> + * Quad 2ch codecs on G2x
> + *
> + * 4 x 2ch codecs for 8 channels output
> + */
> +static int nvhdmi_pcm_prepare_quad_2ch(struct hda_pcm_stream *hinfo,
> +				       struct hda_codec *codec,
> +				       unsigned int stream_tag,
> +				       unsigned int format,
> +				       struct snd_pcm_substream *substream)
> +{
> +	int i, ncodecs;
> +	struct hda_codec *c;
> +
> +	mutex_lock(&codec->spdif_mutex);
> +	ncodecs = substream->runtime->channels / 2;
> +	/* turn off SPDIF once */
> +	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) {
> +		unsigned int ctls = codec->spdif_ctls & ~AC_DIG1_ENABLE & 0xff;
> +		for (i = 0; i < ncodecs; i++) {
> +			c = codec->bus->caddr_tbl[i];
> +			if (c)
> +				snd_hda_codec_write(c, Nv_Master_Convert_nid, 0,
> +						    AC_VERB_SET_DIGI_CONVERT_1,
> +						    ctls);
> +		}
> +	}
> +
> +	/* set the stream id */
> +	for (i = 0; i < ncodecs; i++) {
> +		c = codec->bus->caddr_tbl[i];
> +		if (c)
> +			snd_hda_codec_setup_stream(c, Nv_Master_Convert_nid,
> +						   stream_tag, i << 1, format);
> +	}
> +
> +	/* turn on SPDIF again (if needed) */
> +	if (codec->spdif_status_reset && (codec->spdif_ctls & AC_DIG1_ENABLE)) {
> +		for (i = 0; i < ncodecs; i++) {
> +			c = codec->bus->caddr_tbl[i];
> +			if (c) {
> +				snd_hda_codec_write(c, Nv_Master_Convert_nid, 0,
> +						    AC_VERB_SET_DIGI_CONVERT_1,
> +						    codec->spdif_ctls & 0xff);
> +				snd_hda_codec_write(c, Nv_Master_Convert_nid, 0,
> +						    AC_VERB_SET_DIGI_CONVERT_2,
> +						    codec->spdif_ctls >> 8);
> +			}
> +		}
> +	}
> +	mutex_unlock(&codec->spdif_mutex);
> +	return 0;
> +}
> +
> +static int nvhdmi_pcm_cleanup_quad_2ch(struct hda_pcm_stream *hinfo,
> +				       struct hda_codec *codec,
> +				       struct snd_pcm_substream *substream)
> +{
> +	int i, ncodecs;
> +	struct hda_codec *c;
> +
> +	mutex_lock(&codec->spdif_mutex);
> +	ncodecs = substream->runtime->channels / 2;
> +	for (i = 0; i < ncodecs; i++) {
> +		c = codec->bus->caddr_tbl[i];
> +		if (c)
> +			snd_hda_codec_cleanup_stream(c, Nv_Master_Convert_nid);
> +	}
> +	mutex_unlock(&codec->spdif_mutex);
> +	return 0;
> +}
> +
> +static struct hda_pcm_stream nvhdmi_pcm_playback_quad_2ch = {
> +	.substreams = 1,
> +	.channels_min = 2,
> +	.channels_max = 8,
> +	.nid = Nv_Master_Convert_nid,
> +	.rates = SUPPORTED_RATES,
> +	.maxbps = SUPPORTED_MAXBPS,
> +	.formats = SUPPORTED_FORMATS,
> +	.ops = {
> +		.prepare = nvhdmi_pcm_prepare_quad_2ch,
> +		.cleanup = nvhdmi_pcm_cleanup_quad_2ch,
> +	},
> +};
> +
> +static int nvhdmi_build_pcms_quad_2ch(struct hda_codec *codec)
> +{
> +	struct nvhdmi_spec *spec = codec->spec;
> +	struct hda_pcm *info = &spec->pcm_rec;
> +
> +	codec->num_pcms = 1;
> +	codec->pcm_info = info;
> +
> +	info->name = "NVIDIA HDMI";
> +	info->pcm_type = HDA_PCM_TYPE_HDMI;
> +	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = nvhdmi_pcm_playback_quad_2ch;
> +
> +	return 0;
> +}
> +
> +static struct hda_codec_ops nvhdmi_patch_ops_quad_2ch = {
> +	.build_controls = nvhdmi_build_controls,
> +	.build_pcms = nvhdmi_build_pcms_quad_2ch,
> +	.init = nvhdmi_init,
> +	.free = nvhdmi_free,
> +};
> +
> +static int patch_nvhdmi_quad_2ch(struct hda_codec *codec)
> +{
> +	struct nvhdmi_spec *spec;
> +
> +	if (codec->addr > 0)
> +		return 0;
> +
> +	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
> +	if (spec == NULL)
> +		return -ENOMEM;
> +
> +	codec->spec = spec;
> +
> +	spec->multiout.num_dacs = 0;  /* no analog */
> +	spec->multiout.max_channels = 8;
> +	spec->multiout.dig_out_nid = Nv_Master_Convert_nid;
> +
> +	codec->patch_ops = nvhdmi_patch_ops_quad_2ch;
> +
> +	return 0;
> +}
> +
> +/*
>   * patch entries
>   */
>  static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
> @@ -400,6 +530,9 @@ static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
>  	{ .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
>  	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
>  	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
> +	{ .id = 0x10de000a, .name = "G2x HDMI", .patch = patch_nvhdmi_quad_2ch },
> +	{ .id = 0x10de000b, .name = "G2x HDMI", .patch = patch_nvhdmi_quad_2ch },
> +	{ .id = 0x10de000d, .name = "G2x HDMI", .patch = patch_nvhdmi_quad_2ch },
>  	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
>  	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
>  	{} /* terminator */
> @@ -410,6 +543,9 @@ MODULE_ALIAS("snd-hda-codec-id:10de0003");
>  MODULE_ALIAS("snd-hda-codec-id:10de0005");
>  MODULE_ALIAS("snd-hda-codec-id:10de0006");
>  MODULE_ALIAS("snd-hda-codec-id:10de0007");
> +MODULE_ALIAS("snd-hda-codec-id:10de000a");
> +MODULE_ALIAS("snd-hda-codec-id:10de000b");
> +MODULE_ALIAS("snd-hda-codec-id:10de000d");
>  MODULE_ALIAS("snd-hda-codec-id:10de0067");
>  MODULE_ALIAS("snd-hda-codec-id:10de8001");
>  
>   
I think it's false. It must initialize in native mode (EPT) -> this
patch can't sound, I'd tested it.

-- 
Stefan Ringel <stefan.ringel@arcor.de>

  reply	other threads:[~2009-12-29  8:57 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-12 12:06 HD-Audio device unsuppored (Nvidia G2xx-series GPU implemented) Stefan Ringel
2009-12-13 15:37 ` Stefan Ringel
2009-12-14 11:32 ` Takashi Iwai
2009-12-14 11:50   ` Stefan Ringel
2009-12-14 11:52     ` Takashi Iwai
2009-12-14 17:45       ` Takashi Iwai
2009-12-16 15:20         ` Michal Halva
2009-12-17  7:05           ` Takashi Iwai
2009-12-18  0:09             ` Michal Halva
2009-12-16 21:15         ` Stefan Ringel
2009-12-17  6:46           ` Takashi Iwai
2009-12-19 12:36           ` Stefan Ringel
2009-12-21 10:55             ` Takashi Iwai
2009-12-21 14:41               ` Stefan Ringel
2009-12-27 16:20                 ` Stefan Ringel
2009-12-28 21:34                   ` Takashi Iwai
2009-12-28 22:23                     ` Takashi Iwai
2009-12-29  8:57                       ` Stefan Ringel [this message]
2009-12-29 10:27                         ` Takashi Iwai
2010-03-01 23:19                           ` VDR User
2010-03-02 10:43                             ` Takashi Iwai
  -- strict thread matches above, loose matches on Subject: below --
2009-12-11 16:36 Stefan Ringel
2009-12-11 21:17 ` Takashi Iwai
2009-12-13 20:10   ` Stefan Ringel
2009-12-10 15:20     ` douglas
2009-12-11 16:21 Stefan Ringel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B39C474.70007@arcor.de \
    --to=stefan.ringel@arcor.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).