From: Anssi Hannula <anssi.hannula@iki.fi>
To: John Ettedgui <john.ettedgui@gmail.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: ALSA Multichannel through HDMI
Date: Fri, 26 Nov 2010 00:58:01 +0200 [thread overview]
Message-ID: <4CEEE9F9.6040405@iki.fi> (raw)
In-Reply-To: <AANLkTim7O0vvRcQdYBmTNDnBwFhF-RskfOLtbCnKU_5M@mail.gmail.com>
On 26.11.2010 00:42, John Ettedgui wrote:
> On Thu, Nov 25, 2010 at 11:19 AM, Anssi Hannula <anssi.hannula@iki.fi> wrote:
>> On 25.11.2010 14:21, John Ettedgui wrote:
>>> On Thu, Nov 25, 2010 at 3:40 AM, Anssi Hannula <anssi.hannula@iki.fi> wrote:
>>>> On 25.11.2010 13:09, John Ettedgui wrote:
>>>>> On Thu, Nov 25, 2010 at 2:49 AM, Anssi Hannula <anssi.hannula@iki.fi> wrote:
>>>>>> On 25.11.2010 06:12, John Ettedgui wrote:
>>>>>>> I'm actually trying to get a 5.1 setup working without passthrough, if
>>>>>>> I use mplayer with passthrough my receiver behaves just fine, but I am
>>>>>>> trying to send the 6 channels from the computer.
>>>>>>>
>>>>>>> I was actually told that the current ALSA driver for radeon's hdmi
>>>>>>> does not support more than 2 channels, and that would explain why I'm
>>>>>>> getting this behavior. Is that true though?
>>>>>>
>>>>>> Yes.
>>>>>>
>>>>>>
>>>>>> However, strangely your log output seems to show the intel's hdmi parser
>>>>>> being used instead:
>>>>>>
>>>>>>> ALSA sound/pci/hda/patch_intelhdmi.c:842: hdmi_setup_stream: NID=0x2,
>>>>>>> stream=0x1, new-format=0x11
>>>>>>
>>>>>> Were you just trying some patch at the time?
>>>>>
>>>>> yes Wu gave me a patch to try against the kernel, I'm guessing this is
>>>>> the reason you see something unexpected.
>>>>
>>>> Did 6 channels work with that patch? (possibly with a wrong channel order)
>>> Not any better as far as I remember.
>>
>> OK. Did 2 channel audio continue to work with it?
>>
>> If you are not sure, here's the patch doing the same thing against
>> current alsa driver:
>> http://stuff.onse.fi/0001-ALSA-hda-Use-generic-HDMI-code-for-ATI-HDMI-codecs.patch
>>
>> Confirming that would help (it would allow to switch the ATI chip to use
>> the generic parser instead of the ATI-specific one), though not with the
>> multichannel issue (see below).
>>
>> [...]
>>
>>>>> Since I just moved to jack/rca cables I'm in no hurry anymore, but is
>>>>> there any reason why the driver cannot work with more than 2 channels?
>>>>
>>>> I don't really know (it is simply not implemented).
>>> Alright.
>>>>
>>>>> Anything I could do to help with that?
>>>>
>>>> Possibly. But see above, so that we won't try the same things you
>>>> already tried :)
>>>>
>>> Sure :)
>>
>> Looking again at the the alsa info output you provided, I don't think I
>> have any great ideas. It looks like the chip simply reports that it
>> supports a maximum of 2 channels.
>>
>> One option could be hardcoding "chans = 8;" in generic_hdmi_build_pcms()
>> in sound/pci/hda/patch_hdmi.c (assuming you have the above patch and 2
>> channel audio works with it). However, I find it rather unlikely that it
>> would make any difference.
>>
>> --
>> Anssi Hannula
>>
>
> Anssi,
> the patch fails on my kernel, I cannot find the hda_codec_preset
> manually in there either.
> Did you want me to try that against a 2.6.37 rc instead of a 2.6.36?
For 2.6.36 I think you can just use your earlier patch.
Note that on that kernel generic_hdmi_build_pcms() is
intel_hdmi_build_pcms() in patch_intelhdmi.c.
BTW, I've just been informed by another ATI user that his card was
actually stereo-only, while he thought earlier it was multichannel
capable. So, are you sure your card is a multichannel one?
(if not, it would explain why the card says it is not)
--
Anssi Hannula
next prev parent reply other threads:[~2010-11-25 22:58 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20100112045102.GA29735@localhost>
[not found] ` <eb9000ab1001112311o4bcf98dp2b616d1afffec9e0@mail.gmail.com>
[not found] ` <20100112132140.GA7647@localhost>
[not found] ` <eb9000ab1001120828l6829c6b1g30916b872a0467f7@mail.gmail.com>
[not found] ` <20100113010942.GA6435@localhost>
[not found] ` <eb9000ab1001121732y4212e6m9596f68e24d6c226@mail.gmail.com>
[not found] ` <20100113014550.GA10184@localhost>
[not found] ` <eb9000ab1001122048s1ac0d9c3n130692ba83dd53d1@mail.gmail.com>
[not found] ` <20100113045238.GB26275@localhost>
[not found] ` <eb9000ab1001122055s54bc6697t6103def1e8ae64ae@mail.gmail.com>
[not found] ` <20100113050254.GA28475@localhost>
2010-11-24 23:26 ` ALSA Multichannel through HDMI John Ettedgui
2010-11-25 3:59 ` Mohammad Bahathir Hashim
2010-11-25 4:12 ` John Ettedgui
2010-11-25 5:10 ` Mohammad Bahathir Hashim
2010-11-25 5:36 ` John Ettedgui
2010-11-25 10:49 ` Anssi Hannula
2010-11-25 11:09 ` John Ettedgui
2010-11-25 11:40 ` Anssi Hannula
2010-11-25 12:21 ` John Ettedgui
2010-11-25 19:19 ` Anssi Hannula
2010-11-25 22:42 ` John Ettedgui
2010-11-25 22:58 ` Anssi Hannula [this message]
2010-11-25 23:11 ` John Ettedgui
2010-11-25 23:15 ` Anssi Hannula
[not found] ` <AANLkTikS4C6GS2EuqdA_D58y4h9qCMBEWPSoO7JdhC9g@mail.gmail.com>
2010-11-26 0:53 ` John Ettedgui
2010-11-26 0:59 ` Anssi Hannula
2010-11-26 1:08 ` John Ettedgui
2010-11-26 2:02 ` John Ettedgui
2010-11-26 2:13 ` John Ettedgui
2010-11-26 2:16 ` Anssi Hannula
[not found] ` <AANLkTinbea0wMDCuEQgbO7tqxWBB_qfZub9+yNyC+2LR@mail.gmail.com>
2010-11-26 5:56 ` John Ettedgui
2010-11-26 6:00 ` John Ettedgui
2010-11-26 15:30 ` Anssi Hannula
2010-11-27 4:53 ` John Ettedgui
2010-12-04 23:58 ` Anssi Hannula
2010-12-05 22:32 ` John Ettedgui
2011-01-22 23:34 ` John Ettedgui
2010-01-08 4:25 John Ettedgui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CEEE9F9.6040405@iki.fi \
--to=anssi.hannula@iki.fi \
--cc=alsa-devel@alsa-project.org \
--cc=john.ettedgui@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox