Re: [PATCH] ASoC: Optimise WM8996 no interrupt path

[Liam Girdwood <lrg@ti.com>]

On 20/08/11 19:33, Mark Brown wrote:
> This occurs frequently if we are in edge triggered mode as we must poll the
> interrupt status register until we get no more interrupts so it's worth
> the effort - it means we skip writing null acknowledgements to the chip.
> 
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
>  sound/soc/codecs/wm8996.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c
> index d3277d1..73a1588 100644
> --- a/sound/soc/codecs/wm8996.c
> +++ b/sound/soc/codecs/wm8996.c
> @@ -2416,6 +2416,9 @@ static irqreturn_t wm8996_irq(int irq, void *data)
>  	}
>  	irq_val &= ~snd_soc_read(codec, WM8996_INTERRUPT_STATUS_2_MASK);
>  
> +	if (!irq_val)
> +		return IRQ_NONE;
> +
>  	snd_soc_write(codec, WM8996_INTERRUPT_STATUS_2, irq_val);
>  
>  	if (irq_val & (WM8996_DCS_DONE_01_EINT | WM8996_DCS_DONE_23_EINT)) {
> @@ -2434,10 +2437,7 @@ static irqreturn_t wm8996_irq(int irq, void *data)
>  	if (irq_val & WM8996_MICD_EINT)
>  		wm8996_micd(codec);
>  
> -	if (irq_val)
> -		return IRQ_HANDLED;
> -	else
> -		return IRQ_NONE;
> +	return IRQ_HANDLED;
>  }
>  
>  static irqreturn_t wm8996_edge_irq(int irq, void *data)

Acked-by: Liam Girdwood <lrg@ti.com>