From: Julian Sikorski <belegdol@gmail.com>
To: Andrew Mahone <andrew.mahone@gmail.com>
Cc: alsa-devel@alsa-project.org
Subject: Re: Clevo P170HM / Sager NP8170 audio
Date: Tue, 08 Nov 2011 06:42:10 +0100 [thread overview]
Message-ID: <4EB8C132.7020906@gmail.com> (raw)
In-Reply-To: <CAOUOUDyXhM8WiKOBouRV6_Es6_9rvHLGrjvywQT5foE=uW7eUw@mail.gmail.com>
W dniu 20.08.2011 09:33, Andrew Mahone pisze:
> This laptop is detected as ALC892 audio (and by the codec ID this
> seems to be valid), but none of the configurations for it quite match
> this device. I've been working on documenting the connections with HDA
> Analyzer.
>
> alsa-info output:
> http://www.alsa-project.org/db/?f=b86e4c6447867fbd129a36d8a63e2f5caa836c52
>
> The laptop has built-in 5.1, and 5.1 or 7.1 output via jacks.
>
> DAC NIDs:
> 0x02 front
> 0x03 rear
> 0x04 clfe
> 0x05 side
>
> internal mixers:
> 0x0c front
> 0x0d rear
> 0x0e clfe
> 0x0f side
>
> internal speaker pins:
> 0x14 front
> 0x15 "rear" (front of laptop)
> 0x16 clfe
>
> external ports:
> fixed route:
> 0x17 side
>
> can select any output:
> 0x18 mic / output
> 0x1a line-in / output
> 0x1b headphone
>
> I've been experimenting with patch_realtek.c to add the extra DAC NID,
> and have had some success with a 6-channel mode for the built-in
> speakers and an 8-channel mode that mutes all internal speakers and
> sets the jacks up for output. I still need to manually connect pins
> 0x18, 0x1a, 0x1b to the correct internal mixers for 7.1 to work, and
> headphone plugin does not mute internal speakers in 5.1 mode. I have
> not added a plain stereo mode for internal speakers, although it
> appears that i can probably configure the codec to mix the front
> channels to center and LFE.
>
> Are there any suggestions for what to do next? My current state as a
> patch against the linux-3.0.y repository is at
> http://pastie.org/2400649
>
Please check out this thread:
http://thread.gmane.org/gmane.linux.alsa.devel/86475
With linux-3.1, everything apart from 8-channel sound seems to work with
autoparser, and I was able to get the sound going out from the analog
part of the spdif jack by fiddling with hda-analyzer:
http://article.gmane.org/gmane.linux.alsa.devel/87235
To get this to work automatically, code needs to be written but this is
beyond my skillset.
Julian
next prev parent reply other threads:[~2011-11-08 5:42 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-20 7:33 Clevo P170HM / Sager NP8170 audio Andrew Mahone
2011-11-08 5:42 ` Julian Sikorski [this message]
2011-11-16 13:08 ` Raymond Yau
2011-11-16 15:15 ` Julian Sikorski
2011-11-17 2:08 ` Raymond Yau
2011-11-17 8:46 ` Julian Sikorski
2011-11-17 8:55 ` Julian Sikorski
2011-11-19 2:31 ` Raymond Yau
2011-11-19 9:11 ` Julian Sikorski
2011-11-21 6:47 ` Raymond Yau
2011-11-21 11:39 ` Julian Sikorski
2011-11-22 5:17 ` Raymond Yau
2011-11-22 12:45 ` Julian Sikorski
2011-11-25 6:39 ` Raymond Yau
2011-11-25 12:10 ` Julian Sikorski
2011-11-28 0:42 ` Raymond Yau
2011-11-28 10:27 ` Julian Sikorski
2011-11-28 11:46 ` Raymond Yau
2011-11-28 12:02 ` Julian Sikorski
2011-11-28 12:34 ` Julian Sikorski
2011-11-28 23:45 ` Raymond Yau
2011-11-29 10:25 ` Julian Sikorski
2011-12-01 16:35 ` Julian Sikorski
2011-12-02 0:52 ` Raymond Yau
2011-12-02 15:41 ` Julian Sikorski
2011-12-03 23:59 ` Raymond Yau
2011-12-04 12:41 ` Julian Sikorski
2011-11-24 9:20 ` Julian Sikorski
2011-11-24 10:03 ` Julian Sikorski
2011-11-24 10:30 ` Julian Sikorski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EB8C132.7020906@gmail.com \
--to=belegdol@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=andrew.mahone@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox