From: Lars-Peter Clausen <lars@metafoo.de>
To: Michael Williamson <michael.williamson@criticallink.com>
Cc: alsa-devel@alsa-project.org, broonie@opensource.wolfsonmicro.com,
lrg@ti.com
Subject: Re: [RFC PATCH 1/1] ASoC: dsd1791: Introduce driver for TI DSD1791 stereo codec
Date: Thu, 15 Dec 2011 09:57:37 +0100 [thread overview]
Message-ID: <4EE9B681.3060102@metafoo.de> (raw)
In-Reply-To: <1323906043-28408-2-git-send-email-michael.williamson@criticallink.com>
On 12/15/2011 12:40 AM, Michael Williamson wrote:
> This patch introduces a (spi) codec driver for the Texas Instruments
> DSD1791 24 bit audio stereo DAC.
>
> Testing for basic operation using 16 and 24 bit I2S mode has been
> performed.
>
> http://www.ti.com/product/dsd1791
>
> Signed-off-by: Michael Williamson <michael.williamson@criticallink.com>
> ---
> [...]
> +
> +static int dsd1791_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_codec *codec = rtd->codec;
> + struct dsd1791 *dsd1791 = snd_soc_codec_get_drvdata(codec);
> +
> + switch (params_format(params)) {
> +
> + case SNDRV_PCM_FORMAT_S16_LE:
> + dsd1791->pcm_fmt = DSD1971_FORMAT_S16_LE;
> + break;
> +
> + case SNDRV_PCM_FORMAT_S24_LE:
> + dsd1791->pcm_fmt = DSD1971_FORMAT_S24_LE;
> + break;
There is really no need to add your own constants here. Just reuse the
SNDRV_PCM_FORMAT constants and assign params_format(params) directly to
dsd1791->pcm_fmt.
> + default:
> + dev_dbg(&dsd1791->spi->dev, "bad format\n");
> + return -EINVAL;
> + }
> +
> + return dsd1791_set_format_word(dsd1791, codec);
> +}
> +
> [...]
> +static int dsd1791_set_fmt(struct snd_soc_dai *codec_dai,
> + unsigned int fmt)
> +{
> + struct snd_soc_codec *codec = codec_dai->codec;
> + struct dsd1791 *dsd1791 = snd_soc_codec_get_drvdata(codec);
> +
> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> + case SND_SOC_DAIFMT_I2S:
> + dsd1791->dai_fmt = DSD1791_DAIFMT_I2S;
> + break;
> + case SND_SOC_DAIFMT_RIGHT_J:
> + dsd1791->dai_fmt = DSD1791_DAIFMT_RIGHT_J;
> + break;
> + case SND_SOC_DAIFMT_LEFT_J:
> + dsd1791->dai_fmt = DSD1791_DAIFMT_LEFT_J;
> + break;
Same here for the SND_SOC_DAIFMT constants.
> + default:
> + dev_dbg(&dsd1791->spi->dev, "bad format\n");
> + return -EINVAL;
> + }
> +
> + return dsd1791_set_format_word(dsd1791, codec);
> +}
> +
> +#define DSD1791_RATES SNDRV_PCM_RATE_8000_192000
> +#define DSD1791_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
> + SNDRV_PCM_FMTBIT_S24_LE)
> +
> +static struct snd_soc_dai_ops dsd1791_dai_ops = {
const
> + .hw_params = dsd1791_hw_params,
> + .set_sysclk = dsd1791_set_sysclk,
> + .set_fmt = dsd1791_set_fmt,
> +};
> +
> [...]
> +
> +struct snd_soc_codec_driver dsd1791_soc_codec_dev = {
static, and maybe rename it to dsd1719_codec_driver. The "_soc_codec_dev"
suffix which you can see in other drivers in from old times, where this used
to be a struct snd_soc_codec_device.
> + .probe = dsd1791_probe,
> + .read = dsd1791_read,
> + .write = dsd1791_write,
> + .reg_word_size = sizeof(u8),
> +};
> +
> +static int dsd1791_spi_probe(struct spi_device *spi)
__devinit
> +{
> [...]
> +
> +static int dsd1791_spi_remove(struct spi_device *spi)
__devexit
> +{
> [...]
> +}
> +
> +static struct spi_driver dsd1791_spi = {
> + .driver = {
> + .name = "dsd1791-codec",
> + .owner = THIS_MODULE,
> + },
> + .probe = dsd1791_spi_probe,
> + .remove = dsd1791_spi_remove,
__devexit_p
> +};
> +
next prev parent reply other threads:[~2011-12-15 8:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-14 23:40 [RFC PATCH 0/1] ASoC: dsd1791: Introduce driver for TI DSD1791 stereo codec Michael Williamson
2011-12-14 23:40 ` [RFC PATCH 1/1] " Michael Williamson
2011-12-15 6:58 ` Leon Romanovsky
2011-12-15 7:16 ` Mark Brown
2011-12-15 20:32 ` Michael Williamson
2011-12-16 12:53 ` Mark Brown
2011-12-15 8:57 ` Lars-Peter Clausen [this message]
2011-12-15 7:08 ` [RFC PATCH 0/1] " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE9B681.3060102@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@ti.com \
--cc=michael.williamson@criticallink.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox