From: "Prchal Jiří" <jiri.prchal@aksignal.cz>
To: alsa-devel@alsa-project.org, vbarinov@embeddedalley.com,
mr.swami.reddy@ti.com, peter.ujfalusi@ti.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
sudhakar.raj@ti.com, nsekhar@ti.com, lrg@ti.com
Subject: [PATCH] ASoC: tlv320aic3x: add AGC settings
Date: Fri, 29 Jun 2012 10:52:20 +0200 [thread overview]
Message-ID: <4FED6CC4.4070807@aksignal.cz> (raw)
This patch adds AGC target level and times settings for TLV320AIC3106.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
---
sound/soc/codecs/tlv320aic3x.c | 25 +++++++++++++++++++++++++
1 files changed, 25 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 50a7112..5335ebc 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -204,6 +204,10 @@ static const char *aic3x_right_hpcom_mux[] =
static const char *aic3x_linein_mode_mux[] = { "single-ended", "differential" };
static const char *aic3x_adc_hpf[] =
{ "Disabled", "0.0045xFs", "0.0125xFs", "0.025xFs" };
+static const char *aic3x_agc_level[] =
+ { "-5.5dB", "-8dB", "-10dB", "-12dB", "-14dB", "-17dB", "-20dB", "-24dB" };
+static const char *aic3x_agc_attack[] = { "8ms", "11ms", "16ms", "20ms" };
+static const char *aic3x_agc_decay[] = { "100ms", "200ms", "400ms", "500ms" };
#define LDAC_ENUM 0
#define RDAC_ENUM 1
@@ -231,6 +235,21 @@ static const struct soc_enum aic3x_enum[] = {
SOC_ENUM_DOUBLE(AIC3X_CODEC_DFILT_CTRL, 6, 4, 4, aic3x_adc_hpf),
};
+#define LAGC_LEV_ENUM 0
+#define RAGC_LEV_ENUM 1
+#define LAGC_ATT_ENUM 2
+#define RAGC_ATT_ENUM 3
+#define LAGC_DEC_ENUM 4
+#define RAGC_DEC_ENUM 5
+static const struct soc_enum aic3x_agc_enum[] = {
+ SOC_ENUM_SINGLE(LAGC_CTRL_A, 4, 8, aic3x_agc_level),
+ SOC_ENUM_SINGLE(RAGC_CTRL_A, 4, 8, aic3x_agc_level),
+ SOC_ENUM_SINGLE(LAGC_CTRL_A, 2, 4, aic3x_agc_attack),
+ SOC_ENUM_SINGLE(RAGC_CTRL_A, 2, 4, aic3x_agc_attack),
+ SOC_ENUM_SINGLE(LAGC_CTRL_A, 0, 4, aic3x_agc_decay),
+ SOC_ENUM_SINGLE(RAGC_CTRL_A, 0, 4, aic3x_agc_decay),
+};
+
/*
* DAC digital volumes. From -63.5 to 0 dB in 0.5 dB steps
*/
@@ -355,6 +374,12 @@ static const struct snd_kcontrol_new aic3x_snd_controls[] = {
* adjust PGA to max value when ADC is on and will never go back.
*/
SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0),
+ SOC_ENUM("Left AGC Target level", aic3x_agc_enum[LAGC_LEV_ENUM]),
+ SOC_ENUM("Right AGC Target level", aic3x_agc_enum[RAGC_LEV_ENUM]),
+ SOC_ENUM("Left AGC Attack time", aic3x_agc_enum[LAGC_ATT_ENUM]),
+ SOC_ENUM("Right AGC Attack time", aic3x_agc_enum[RAGC_ATT_ENUM]),
+ SOC_ENUM("Left AGC Decay time", aic3x_agc_enum[LAGC_DEC_ENUM]),
+ SOC_ENUM("Right AGC Decay time", aic3x_agc_enum[RAGC_DEC_ENUM]),
/* Input */
SOC_DOUBLE_R_TLV("PGA Capture Volume", LADC_VOL, RADC_VOL,
--
1.7.7
next reply other threads:[~2012-06-29 8:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-29 8:52 Prchal Jiří [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-07-10 12:35 [PATCH] ASoC: tlv320aic3x: add AGC settings Jiri Prchal
2012-07-10 13:42 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FED6CC4.4070807@aksignal.cz \
--to=jiri.prchal@aksignal.cz \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@ti.com \
--cc=mr.swami.reddy@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=sudhakar.raj@ti.com \
--cc=vbarinov@embeddedalley.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox