alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Raymond Yau <superquad.vortex2@gmail.com>
To: ALSA Development Mailing List <alsa-devel@alsa-project.org>
Subject: Re: alsactl restore: unknown hardware: ymf724f
Date: Sun, 28 Mar 2010 20:52:19 +0800	[thread overview]
Message-ID: <4f3252891003280552y29015aeav7b68e9972371325b@mail.gmail.com> (raw)
In-Reply-To: <hohr62$f78$1@dough.gmane.org>

2010/3/26 Angel Tsankov <fn42551@fmi.uni-sofia.bg>

> Hello again!
>
> I've recently had some time to investigate this problem further on and
> here's what I've discovered:
>
> Raymond Yau wrote:
> > 2010/2/26 Pacho Ramos <pacho@condmat1.ciencias.uniovi.es>
> >
> >> El vie, 26-02-2010 a las 13:57 +0200, Angel Tsankov escribió:
> >>> Raymond Yau wrote:
> >>>> 2010/2/25 Jaroslav Kysela <perex@perex.cz>
> >>>>
> >>>>> On Thu, 25 Feb 2010, Angel Tsankov wrote:
> >>>>>
> >>>>>> Jaroslav Kysela wrote:
> >>>>>>> On Thu, 25 Feb 2010, Angel Tsankov wrote:
> >>>>>>>
> >>>>>>>> Hello,
> >>>>>>>>
> >>>>>>>> I run 'alsactl restore' on a machine with 2 sound cards -- a
> >> built-in
> >>>>>>>> Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
> >> (rev
> >>>>>>>> 02) and a non-built-in Yamaha Corporation YMF-724F [DS-1 Audio
> >>>>>>>> Controller] (rev 03) -- and get the following message:
> >>>>>>>>
> >>>>>>>> Unknown hardware: "YMF724F" "SigmaTel STAC9700,83,84"
> >> "AC97a:83847600"
> >>>>>>>> "0x1073" "0x000d"
> >>>>>>>> Hardware is initialized using a guess method
> >>>>>>>>
> >>>>>>>> As a consequence the volume levels of the Yamaha card do not get
> >>>>>>>> restored to the levels stored in /etc/asound.state.  The volume
> >> levels
> >>>>>>>> of the built-in card however are properly restored.  The
> >> asound.state
> >>>>>>>> file has been created by executing 'alsactl store'.
> >>>>>>>>
>
> >>
> > your problem is "alsactl restore" become "alsactl init" when the number
> of
> > controls is more than those in state file.
>
> I'm not quite sure that the case is this since 'alsactl restore' does
> restore the values of the Yamaha sound card (and those of the other
> card, too) and 'alsactl restore 1' seems to just initialize the Yamaha
> card.  This is with alsa-utils version 1.0.22.
>
>
> Regards,
>
> Angel Tsankov
>
>
"Hardware is initialized using a guess method "  is the message used by
alsactl init

http://git.alsa-project.org/?p=alsa-utils.git;a=commitdiff;h=9a748178d1c9e783242f0cc794ab3efb27092f34;hp=0c02a4e3d23c7b5d03215f1bfaba9f70ed11e9b7

  reply	other threads:[~2010-03-28 12:52 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-25  7:54 alsactl restore: unknown hardware: ymf724f Angel Tsankov
2010-02-25  8:25 ` Jaroslav Kysela
2010-02-25 13:31   ` Angel Tsankov
2010-02-25 14:05     ` Jaroslav Kysela
2010-02-25 23:11       ` Raymond Yau
2010-02-26 11:57         ` Angel Tsankov
2010-02-26 14:05           ` Pacho Ramos
2010-02-26 16:36             ` Angel Tsankov
2010-02-27  7:14             ` Raymond Yau
2010-02-28  1:29             ` Raymond Yau
2010-03-26  8:28               ` Angel Tsankov
2010-03-28 12:52                 ` Raymond Yau [this message]
2010-03-28 21:37                   ` Angel Tsankov
2010-03-29  1:10                     ` Raymond Yau
2010-03-29  8:09                       ` Angel Tsankov
2010-04-01 14:05                         ` Raymond Yau
2010-04-01 21:52                           ` Angel Tsankov
2010-04-01 22:52                             ` Raymond Yau
2010-02-27  2:06           ` Raymond Yau
2010-02-27  8:09             ` Angel Tsankov
2010-02-27  8:37               ` Raymond Yau
2010-02-27  9:53                 ` Angel Tsankov
2010-02-27 10:03                   ` Angel Tsankov
2010-02-27 15:19                     ` Angel Tsankov
2010-02-27 11:21                   ` Raymond Yau
2010-02-27 13:45                   ` Raymond Yau
2010-02-27 14:46                     ` Angel Tsankov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4f3252891003280552y29015aeav7b68e9972371325b@mail.gmail.com \
    --to=superquad.vortex2@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).