From: Daniel Mack <zonque@gmail.com>
To: "jovanovic.ljubomir@t-online.de" <jovanovic.ljubomir@t-online.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: US Robotics USB Phone
Date: Mon, 30 Jul 2012 12:52:48 +0200 [thread overview]
Message-ID: <50166780.5010307@gmail.com> (raw)
In-Reply-To: <1SvnXl-0CApFY0@fwd11.aul.t-online.de>
On 30.07.2012 12:49, jovanovic.ljubomir@t-online.de wrote:
> Here it is:
Sorry, that output is completely garbled. If you can't make your mail
client behave sanely, send it as .txt attachment.
Also: did you install a driver on Windows to make that device work?
Daniel
> Usage Type Data wMaxPacketSize
> 0x0009 1x 9 bytes bInterval 1 Endpoint
> Descriptor: bLength 7 bDescriptorType
> 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes
> 1 Transfer Type Isochronous
> Synch Type None Usage Type Data
> wMaxPacketSize 0x0009 1x 9 bytes bInterval
> 1 Interface Descriptor: bLength 9
> bDescriptorType 4 bInterfaceNumber 1
> bAlternateSetting 2 bNumEndpoints 2
> bInterfaceClass 224 Wireless bInterfaceSubClass 1
> Radio Frequency bInterfaceProtocol 1 Bluetooth
> iInterface 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN bmAttributes 1
> Transfer Type Isochronous Synch Type
> None Usage Type Data
> wMaxPacketSize 0x0011 1x 17 bytes bInterval
> 1 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1 Transfer Type
> Isochronous Synch Type None Usage Type
> Data wMaxPacketSize 0x0011 1x 17 bytes
> bInterval 1 Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 1 bAlternateSetting 3 bNumEndpoints 2
> bInterfaceClass 224 Wireless bInterfaceSubClass 1
> Radio Frequency bInterfaceProtocol 1 Bluetooth
> iInterface 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN bmAttributes 1
> Transfer Type Isochronous Synch Type
> None Usage Type Data
> wMaxPacketSize 0x0020 1x 32 bytes bInterval
> 1 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1 Transfer Type
> Isochronous Synch Type None Usage Type
> Data wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 1 Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 1 bAlternateSetting 4 bNumEndpoints 2
> bInterfaceClass 224 Wireless bInterfaceSubClass 1
> Radio Frequency bInterfaceProtocol 1 Bluetooth
> iInterface 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN bmAttributes 1
> Transfer Type Isochronous Synch Type
> None Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes bInterval
> 1 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1 Transfer Type
> Isochronous Synch Type None Usage Type
> Data wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1 Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 1 bAlternateSetting 5 bNumEndpoints 2
> bInterfaceClass 224 Wireless bInterfaceSubClass 1
> Radio Frequency bInterfaceProtocol 1 Bluetooth
> iInterface 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN bmAttributes 1
> Transfer Type Isochronous Synch Type
> None Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes bInterval
> 1 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 1 Transfer Type
> Isochronous Synch Type None Usage Type
> Data wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 1 Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 2 bAlternateSetting 0 bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol iInterface
> 0 Endpoint Descriptor: bLength 7
> bDescriptorType 5 bEndpointAddress 0x84 EP
> 4 IN bmAttributes 2 Transfer Type
> Bulk Synch Type None Usage Type
> Data wMaxPacketSize 0x0020 1x 32 bytes
> bInterval 1 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress
> 0x04 EP 4 OUT bmAttributes 2 Transfer
> Type Bulk Synch Type None
> Usage Type Data wMaxPacketSize 0x0020 1x 32
> bytes bInterval 1 Interface Descriptor:
> bLength 9 bDescriptorType 4
> bInterfaceNumber 3 bAlternateSetting 0
> bNumEndpoints 0 bInterfaceClass 254 Application
> Specific Interface bInterfaceSubClass 1 Device Firmware
> Update bInterfaceProtocol 1 iInterface 0
> Device Firmware Upgrade Interface Descriptor: bLength
> 7 bDescriptorType 33
> bmAttributes 7 Will Not Detach
> Manifestation Tolerant Upload Supported
> Download Supported wDetachTimeout 5000
> milliseconds wTransferSize 64 bytesDevice
> Status: 0x0001 Self Powered
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 2.00 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> ehci_hcd iProduct 2 EHCI Host Controller iSerial
> 1 0000:00:1d.7 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12Hub Descriptor: bLength 11
> bDescriptorType 41 nNbrPorts 8 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00
> PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0503
> highspeed power enable connect Port 2: 0000.0100 power Port 3:
> 0000.0503 highspeed power enable connect Port 4: 0000.0100 power
> Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0503
> highspeed power enable connect Port 8: 0000.0503 highspeed power
> enable connectDevice Status: 0x0001 Self Powered
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 1.10 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> uhci_hcd iProduct 2 UHCI Host Controller iSerial
> 1 0000:00:1d.0 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255Hub Descriptor: bLength 9
> bDescriptorType 41 nNbrPorts 2 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00
> PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power
> Port 2: 0000.0103 power enable connectDevice Status: 0x0001 Self
> Powered
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 1.10 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> uhci_hcd iProduct 2 UHCI Host Controller iSerial
> 1 0000:00:1d.1 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255Hub Descriptor: bLength 9
> bDescriptorType 41 nNbrPorts 2 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00
> PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power
> Port 2: 0000.0100 powerDevice Status: 0x0001 Self Powered
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 1.10 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> uhci_hcd iProduct 2 UHCI Host Controller iSerial
> 1 0000:00:1d.2 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255Hub Descriptor: bLength 9
> bDescriptorType 41 nNbrPorts 2 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00
> PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power
> Port 2: 0000.0103 power enable connectDevice Status: 0x0001 Self
> Powered
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubDevice
> Descriptor: bLength 18 bDescriptorType 1
> bcdUSB 1.10 bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed
> (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b
> Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice
> 3.04 iManufacturer 3 Linux 3.4.6-2.fc17.i686
> uhci_hcd iProduct 2 UHCI Host Controller iSerial
> 1 0000:00:1d.3 bNumConfigurations 1 Configuration
> Descriptor: bLength 9 bDescriptorType 2
> wTotalLength 25 bNumInterfaces 1
> bConfigurationValue 1 iConfiguration 0
> bmAttributes 0xe0 Self Powered Remote Wakeup
> MaxPower 0mA Interface Descriptor: bLength
> 9 bDescriptorType 4 bInterfaceNumber
> 0 bAlternateSetting 0 bNumEndpoints 1
> bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub iInterface
> 0 Endpoint Descriptor: bLength
> 7 bDescriptorType 5 bEndpointAddress 0x81
> EP 1 IN bmAttributes 3 Transfer Type
> Interrupt Synch Type None Usage
> Type Data wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255Hub Descriptor: bLength 9
> bDescriptorType 41 nNbrPorts 2 wHubCharacteristic
> 0x000a No power switching (usb 1.0) Per-port overcurrent
> protection bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00
> PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power
> Port 2: 0000.0100 powerDevice Status: 0x0001 Self Powered
>
> FREEMAIL@T-ONLINE.DE - Die kostenlose E-Mail Adresse unabhängig vom
> Internetanbieter. Jetzt kostenlos anmelden unter
> http://t-online.de/gratis-email [1]
>
> Links:
> ------
> [1] http://t-online.de/gratis-email
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2012-07-30 10:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-30 10:49 US Robotics USB Phone jovanovic.ljubomir
2012-07-30 10:52 ` Daniel Mack [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-07-30 22:07 jovanovic.ljubomir
2012-07-30 14:12 jovanovic.ljubomir
2012-07-30 14:20 ` Daniel Mack
2012-07-30 8:18 jovanovic.ljubomir
2012-07-30 8:21 ` Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50166780.5010307@gmail.com \
--to=zonque@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=jovanovic.ljubomir@t-online.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).