From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000604]: sound loop problem
Date: Thu, 28 Oct 2004 02:22:26 +0200 [thread overview]
Message-ID: <50696d5d196b45ca7d1893f3f6497bde@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=604>
======================================================================
Reported By: chomwitt
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 604
Category: PCI - atiixp
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: slackware10
Kernel Version: 2.6.7
======================================================================
Date Submitted: 10-26-2004 01:29 CEST
Last Modified: 10-28-2004 02:22 CEST
======================================================================
Summary: sound loop problem
Description:
i get a sound loop which gets correctet only
while moving the mouse!
======================================================================
----------------------------------------------------------------------
chomwitt - 10-28-04 02:17
----------------------------------------------------------------------
aadebug output
ALSA Audio Debug v0.0.8 - Thu Oct 28 01:02:33 EEST 2004
http://alsa.opensrc.org/
aadebug Kernel ----------------------------------------------------
Linux garibaldh20 2.6.7
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=13 Thu Oct 28 00:25:29
EEST 2004 i686 unknown
unknown GNU/Linux
Loaded Modules --------------------------------------------
snd_pcm_oss 51368 0
snd_mixer_oss 19328 1 snd_pcm_oss
snd_atiixp 18472 0
snd_ac97_codec 67920 1 snd_atiixp
snd_pcm 80904 2 snd_pcm_oss,snd_atiixp
snd_timer 22788 1 snd_pcm
snd 46820 6
snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 9480 2 snd_atiixp,snd_pcm
Proc Config -----------------------------------------------
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_PCM_OSS=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
Modprobe Conf --------------------------------------------
alias snd-card-0 snd-atiixp
alias sound-slot-0 snd-atiixp
Proc Asound -----------------------------------------------
Advanced Linux Sound Architecture Driver Version 1.0.6a
Compiled on Oct 28 2004 for kernel 2.6.7.
0 [IXP ]: ATIIXP - ATI IXP
ATI IXP rev 0 at 0xe8003000, irq 10
0: [0- 0]: ctl
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
33: : timer
00-00: ATI IXP AC97 : ATI IXP AC97 : playback 1 : capture 1
Dev Snd ---------------------------------------------------
Warning: /dev/snd does not exist
CPU -------------------------------------------------------
model name : Intel(R) Celeron(R) CPU 2.80GHz
cpu MHz : 2801.084
RAM -------------------------------------------------------
MemTotal: 191744 kB
SwapTotal: 240932 kB
Hardware --------------------------------------------------
00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5833 (rev 02)
00:14.5 Multimedia audio controller: ATI Technologies Inc SoundMAX
Integrated Digital Audio
----------------------------------------------------------------------
chomwitt - 10-28-04 02:22
----------------------------------------------------------------------
some more information:
this is the /proc/interrupt
0: 5757032 XT-PIC timer
1: 2574 XT-PIC i8042
2: 0 XT-PIC cascade
5: 100000 XT-PIC ohci_hcd
9: 4 XT-PIC acpi
10: 9584 XT-PIC ohci_hcd, yenta, yenta, ATI IXP
11: 2 XT-PIC ehci_hcd, ohci_hcd, ohci_hcd
12: 601 XT-PIC i8042
14: 16262 XT-PIC ide0
15: 21 XT-PIC ide1
NMI: 0
LOC: 5757240
ERR: 0
lspci | grep -i audio
00:14.5 Multimedia audio controller: ATI Technologies Inc SoundMAX
Integrated Digital Audio
(someone suggested to me to remove apic,acpi,hpet from kernel.
i did that , recompiled , but the problem remained )
Issue History
Date Modified Username Field Change
======================================================================
10-26-04 01:29 chomwitt New Issue
10-26-04 01:29 chomwitt Distribution => slackware10
10-26-04 01:29 chomwitt Kernel Version => 2.6.7
10-27-04 21:07 chomwitt Note Added: 0002280
10-28-04 02:14 chomwitt Note Added: 0002281
10-28-04 02:17 chomwitt Note Added: 0002282
10-28-04 02:22 chomwitt Note Added: 0002283
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
next reply other threads:[~2004-10-28 0:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-28 0:22 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-03-22 2:19 [ALSA - driver 0000604]: sound loop problem bugtrack
2005-09-14 14:01 bugtrack
2004-11-23 21:36 bugtrack
2004-11-10 11:56 bugtrack
2004-10-28 0:17 bugtrack
2004-10-28 0:14 bugtrack
2004-10-27 19:07 bugtrack
2004-10-25 23:29 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50696d5d196b45ca7d1893f3f6497bde@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox