From: Daniel Mack <zonque@gmail.com>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Linux-ALSA <alsa-devel@alsa-project.org>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>, Simon <horms@verge.net.au>,
Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Subject: Re: [RFC][PATCH 2/2] ASoC: simple-card: add DT support
Date: Fri, 30 Nov 2012 11:38:42 +0100 [thread overview]
Message-ID: <50B88CB2.9040605@gmail.com> (raw)
In-Reply-To: <87r4ndhvwj.wl%kuninori.morimoto.gx@renesas.com>
Hi Kuninori,
On 29.11.2012 05:32, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> sound/soc/generic/simple-card.c | 90 +++++++++++++++++++++++++++++++++++++--
> 1 file changed, 87 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
> index b4b4cab..a59e88c 100644
> --- a/sound/soc/generic/simple-card.c
> +++ b/sound/soc/generic/simple-card.c
> @@ -9,6 +9,7 @@
> * published by the Free Software Foundation.
> */
>
> +#include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/module.h>
> #include <sound/simple_card.h>
> @@ -47,12 +48,89 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd)
> return 0;
> }
>
> +static void asoc_simple_card_parse_of(struct device_node *np,
> + struct asoc_simple_card_info *cinfo,
> + struct device *dev)
> +{
> + struct asoc_simple_dai_init_info *iinfo;
> + unsigned int cpu_daifmt = 0;
> + unsigned int codec_daifmt = 0;
> + unsigned int sysclk = 0;
> +
> + /*
> + * it will find
> + *
> + * iinfo,cpu,snd,soc,daifmt,xxx
> + * iinfo,codec,snd,soc,daifmt,xxx
> + * iinfo,sysclk
> + */
> + snd_soc_of_parse_daifmt(np, "iinfo,cpu,", &cpu_daifmt);
> + snd_soc_of_parse_daifmt(np, "iinfo,codec,", &codec_daifmt);
> + of_property_read_u32(np, "iinfo,sysclk", &sysclk);
> +
> + if (cpu_daifmt || codec_daifmt || sysclk) {
> + iinfo = devm_kzalloc(dev, sizeof(*iinfo), GFP_KERNEL);
> + if (!iinfo)
> + return;
> +
> + cinfo->init = iinfo;
> + iinfo->cpu_daifmt = cpu_daifmt;
> + iinfo->codec_daifmt = codec_daifmt;
> + iinfo->sysclk = sysclk;
> + }
> +
> + /*
> + * it will find
> + *
> + * cinfo,xxx
> + */
> + of_property_read_string(np, "cinfo,name", &cinfo->name);
> + of_property_read_string(np, "cinfo,card", &cinfo->card);
> + of_property_read_string(np, "cinfo,cpu_dai", &cinfo->cpu_dai);
> + of_property_read_string(np, "cinfo,codec", &cinfo->codec);
> + of_property_read_string(np, "cinfo,platform", &cinfo->platform);
> + of_property_read_string(np, "cinfo,codec_dai", &cinfo->codec_dai);
CPUs, codecs and platforms should be referenced by phandles rather than
by string. The ASoC core is well prepared for this, by using the
dai_link's *_of_node members.
> + /*
> + * debug info
> + */
> + if (cinfo->name)
> + dev_dbg(dev, "name = %s\n", cinfo->name);
> + if (cinfo->card)
> + dev_dbg(dev, "card = %s\n", cinfo->card);
> + if (cinfo->cpu_dai)
> + dev_dbg(dev, "cpu_dai = %s\n", cinfo->cpu_dai);
> + if (cinfo->codec)
> + dev_dbg(dev, "codec = %s\n", cinfo->codec);
> + if (cinfo->platform)
> + dev_dbg(dev, "platform = %s\n", cinfo->platform);
> + if (cinfo->codec_dai)
> + dev_dbg(dev, "codec_dai = %s\n", cinfo->codec_dai);
> + if (iinfo && iinfo->cpu_daifmt)
> + dev_dbg(dev, "cpu_daifmt = %08x\n", iinfo->cpu_daifmt);
> + if (iinfo && iinfo->codec_daifmt)
> + dev_dbg(dev, "codec_daifmt = %08x\n", iinfo->codec_daifmt);
> + if (iinfo && iinfo->sysclk)
> + dev_dbg(dev, "iinfo,sysclk = %d\n", iinfo->sysclk);
> +}
> +
> static int asoc_simple_card_probe(struct platform_device *pdev)
> {
> - struct asoc_simple_card_info *cinfo = pdev->dev.platform_data;
> + struct asoc_simple_card_info *cinfo;
> + struct device_node *np = pdev->dev.of_node;
> + struct device *dev = &pdev->dev;
> +
> + cinfo = NULL;
> + if (np && of_device_is_available(np)) {
> + cinfo = devm_kzalloc(dev, sizeof(*cinfo), GFP_KERNEL);
> + if (cinfo)
> + asoc_simple_card_parse_of(np, cinfo, dev);
> + } else {
> + cinfo = pdev->dev.platform_data;
> + }
>
> if (!cinfo) {
> - dev_err(&pdev->dev, "no info for asoc-simple-card\n");
> + dev_err(dev, "no info for asoc-simple-card\n");
> return -EINVAL;
> }
>
> @@ -62,7 +140,7 @@ static int asoc_simple_card_probe(struct platform_device *pdev)
> !cinfo->codec ||
> !cinfo->platform ||
> !cinfo->codec_dai) {
> - dev_err(&pdev->dev, "insufficient asoc_simple_card_info settings\n");
> + dev_err(dev, "insufficient asoc_simple_card_info settings\n");
That's an unrelated change that should probably go into a separate commit.
Daniel
next prev parent reply other threads:[~2012-11-30 10:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-29 4:31 [RFC][PATCH 0/2] ASoC: add DT support on simple-card Kuninori Morimoto
2012-11-29 4:31 ` [RFC][PATCH 1/2] ASoC: add snd_soc_of_parse_daifmt() Kuninori Morimoto
2012-11-29 5:21 ` Stephen Warren
2012-11-29 15:12 ` Mark Brown
2012-11-30 0:35 ` Kuninori Morimoto
2012-12-04 20:18 ` Stephen Warren
2012-12-05 7:55 ` Kuninori Morimoto
2012-12-05 20:42 ` Stephen Warren
2012-12-06 9:02 ` Kuninori Morimoto
2012-11-29 4:32 ` [RFC][PATCH 2/2] ASoC: simple-card: add DT support Kuninori Morimoto
2012-11-29 5:20 ` Stephen Warren
2012-11-29 6:05 ` Kuninori Morimoto
2012-11-30 10:38 ` Daniel Mack [this message]
2012-12-03 0:18 ` Kuninori Morimoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50B88CB2.9040605@gmail.com \
--to=zonque@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@gmail.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox