alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Tormen <my.nl.abos@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, Adam Williamson <awilliam@redhat.com>
Subject: Re: No sound with Sony VAIO VPCZ1 (ALC889)
Date: Tue, 16 Jul 2013 10:00:21 +0200	[thread overview]
Message-ID: <51E4FD95.2080500@gmail.com> (raw)
In-Reply-To: <51DE9D18.6010304@gmail.com>

On 11/07/13 13:55, Tormen wrote:
> Now it applied like charme on the debian 3.9.6 kernel source :
>
> /mnt/tmp/src/linux-3.9.6 % cat 
> /tmp/0001-ALSA-hda-Add-no_multi_io-hda_gen_spec-flag.patch|patch -p1
> patching file Documentation/sound/alsa/HD-Audio.txt
> patching file sound/pci/hda/hda_generic.c
> Hunk #1 succeeded at 138 (offset -4 lines).
> Hunk #2 succeeded at 1501 (offset -43 lines).
> Hunk #3 succeeded at 1515 with fuzz 2 (offset -43 lines).
> Hunk #4 succeeded at 1543 (offset -43 lines).
> Hunk #5 succeeded at 1562 (offset -43 lines).
> patching file sound/pci/hda/hda_generic.h
> Hunk #1 succeeded at 202 with fuzz 2 (offset -18 lines).
> patching file sound/pci/hda/patch_realtek.c
> Hunk #1 succeeded at 1816 (offset -27 lines).
>
> I am compiling now and I'll let you know!
This time I did apply your patch building the debian binary packages
(because I wanted the original debian config and also the same kernel
I was testing on before, just with your patch applied)
... which took too long and then I was leaving to Paris until today.

Unfortunately I was not being able to make the sound come through the 
speakers yet.
I probably must have missed something :/

How can I make sure that the version I am using contains your patch ?
How can I make sure that your patch is active / being used ?
     I tried the hints file (see below) or can I pass this also as 
module parameter ?

So here is what I got:

=================================================
KERNEL: SMP Debian 3.9.6-1~bpo70+1 x86_64 GNU/Linux with your patch

Tested in single user mode.

# STARTING POINT: no snd* modules loaded

modprobe snd
modprobe snd_hda_intel

--> "dmesg" got this:
[ 1962.392102] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 1962.404217] hda_codec: ALC889: SKU not ready 0x411111f0
[ 1962.404460] ALSA hda_auto_parser.c:393 autoconfig: line_outs=1 
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1962.404462] ALSA hda_auto_parser.c:397    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[ 1962.404464] ALSA hda_auto_parser.c:401    hp_outs=1 
(0x15/0x0/0x0/0x0/0x0)
[ 1962.404465] ALSA hda_auto_parser.c:402    mono: mono_out=0x0
[ 1962.404467] ALSA hda_auto_parser.c:406    inputs:
[ 1962.404468] ALSA hda_auto_parser.c:410      Mic=0x18
[ 1962.404470] ALSA hda_auto_parser.c:410      Mic=0x19
[ 1962.404471] ALSA hda_auto_parser.c:410      Internal Mic=0x12
[ 1962.404473] ALSA patch_realtek.c:486 realtek: No valid SSID, checking 
pincfg 0x411111f0 for NID 0x1d
[ 1962.404475] ALSA patch_realtek.c:569 realtek: Enable default setup 
for auto mode as fallback
[ 1962.407492] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:1b.0/input/input13
[ 1962.414631] input: HDA Intel MID Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 1962.414797] input: HDA Intel MID Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 1962.414893] input: HDA Intel MID Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16

aplay bla.wav
# NO SOUND OUTPUT THROUGH SPEAKERS (but through headphone, when plugged)

root@seven /sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0 # cat 
hints
root@seven /sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0 # 
echo "multi_io = yes" > hints
root@seven /sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0 # cat 
hints
multi_io = yes
root@seven /sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0 # 
echo "1" >reconfig
root@seven /sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0 # cat 
hints
multi_io = yes

--> "dmesg" got this:
[ 2109.028690] ALSA hda_hwdep.c:221 hda-codec: reconfiguring
[ 2109.039537] hda_codec: ALC889: SKU not ready 0x411111f0
[ 2109.039975] ALSA hda_auto_parser.c:393 autoconfig: line_outs=1 
(0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2109.039981] ALSA hda_auto_parser.c:397    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[ 2109.039985] ALSA hda_auto_parser.c:401    hp_outs=1 
(0x15/0x0/0x0/0x0/0x0)
[ 2109.039989] ALSA hda_auto_parser.c:402    mono: mono_out=0x0
[ 2109.039992] ALSA hda_auto_parser.c:406    inputs:
[ 2109.039996] ALSA hda_auto_parser.c:410      Mic=0x18
[ 2109.040000] ALSA hda_auto_parser.c:410      Mic=0x19
[ 2109.040004] ALSA hda_auto_parser.c:410      Internal Mic=0x12
[ 2109.040009] ALSA patch_realtek.c:486 realtek: No valid SSID, checking 
pincfg 0x411111f0 for NID 0x1d
[ 2109.040012] ALSA patch_realtek.c:569 realtek: Enable default setup 
for auto mode as fallback
[ 2109.041275] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:1b.0/input/input17
[ 2109.047928] input: HDA Intel MID Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 2109.048065] input: HDA Intel MID Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 2109.048200] input: HDA Intel MID Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input20

aplay bla.wav
# STILL, NO SOUND OUTPUT THROUGH SPEAKERS (but through headphone, when 
plugged)
=================================================


Tormen.

  reply	other threads:[~2013-07-16  8:00 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-03 17:51 No sound with Sony VAIO VPCZ1 (ALC889) Tormen
2013-07-04 16:05 ` Tormen
2013-07-04 16:31   ` Takashi Iwai
2013-07-04 22:53   ` Tormen
2013-07-05  0:29     ` Adam Williamson
2013-07-05  5:31       ` Takashi Iwai
2013-07-05  5:29     ` Takashi Iwai
2013-07-05 12:00       ` Tormen
2013-07-05 12:29         ` Takashi Iwai
2013-07-05 12:45           ` Takashi Iwai
2013-07-05 21:38           ` Adam Williamson
2013-07-07 23:09             ` Tormen
2013-07-08  8:04               ` Takashi Iwai
2013-07-08 17:00                 ` Adam Williamson
2013-07-08 19:16                   ` Takashi Iwai
2013-07-09 18:52                     ` Adam Williamson
2013-07-10 15:27                       ` Takashi Iwai
     [not found]               ` <CAN8ccibmth-sEiXraWTRde-ociD3q5VT-7CuYaE_KQ70JOf2xQ@mail.gmail.com>
     [not found]                 ` <51DA9ADD.6080101@gmail.com>
2013-07-08 15:00                   ` Raymond Yau
2013-07-08 16:35               ` Adam Williamson
2013-07-08 17:48                 ` Takashi Iwai
2013-07-09 18:53                   ` Adam Williamson
2013-07-10 15:30                     ` Takashi Iwai
2013-07-10 21:42                       ` Tormen
2013-07-11  5:29                         ` Takashi Iwai
2013-07-11  9:31                           ` Tormen
2013-07-11 10:23                             ` Takashi Iwai
2013-07-11 11:55                               ` Tormen
2013-07-16  8:00                                 ` Tormen [this message]
2013-07-16  8:05                                   ` Takashi Iwai
2013-07-16  8:06                                     ` Tormen
2013-07-16  9:15                                       ` Takashi Iwai
2013-07-16 18:38                                         ` Tormen
2013-07-16 19:24                                           ` Takashi Iwai
2013-07-16 23:23                                             ` Tormen
2013-07-17  7:49                                               ` Takashi Iwai
2013-09-17 19:51                                                 ` Adam Williamson
2013-09-19 16:45                                                   ` Takashi Iwai
2013-09-19 20:44                                                     ` Adam Williamson
2013-09-19 22:10                                                       ` Adam Williamson
2013-07-17  6:06                                             ` Tormen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=51E4FD95.2080500@gmail.com \
    --to=my.nl.abos@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=awilliam@redhat.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).