alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org, Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@linaro.org>
Subject: Re: [PATCH] ASoC: ad1980: Provide stub DAPM support
Date: Wed, 07 Aug 2013 09:53:02 +0200	[thread overview]
Message-ID: <5201FCDE.2070100@metafoo.de> (raw)
In-Reply-To: <1375829501-14223-1-git-send-email-broonie@kernel.org>

On 08/07/2013 12:51 AM, Mark Brown wrote:
> From: Mark Brown <broonie@linaro.org>
> 
> Since non-DAPM devices are not going to be supported provide DAPM input
> and output widgets and hook them up to the DAIs.
> 
> Signed-off-by: Mark Brown <broonie@linaro.org>

I unfortunately can't test this at the moment, but looks good, thanks.

Acked-by: Lars-Peter Clausen <lars@metafoo.de>

> ---
>  sound/soc/codecs/ad1980.c | 43 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
> index 89fcf7d..7257a88 100644
> --- a/sound/soc/codecs/ad1980.c
> +++ b/sound/soc/codecs/ad1980.c
> @@ -96,6 +96,44 @@ SOC_ENUM("Capture Source", ad1980_cap_src),
>  SOC_SINGLE("Mic Boost Switch", AC97_MIC, 6, 1, 0),
>  };
>  
> +static const struct snd_soc_dapm_widget ad1980_dapm_widgets[] = {
> +SND_SOC_DAPM_INPUT("MIC1"),
> +SND_SOC_DAPM_INPUT("MIC2"),
> +SND_SOC_DAPM_INPUT("CD_L"),
> +SND_SOC_DAPM_INPUT("CD_R"),
> +SND_SOC_DAPM_INPUT("AUX_L"),
> +SND_SOC_DAPM_INPUT("AUX_R"),
> +SND_SOC_DAPM_INPUT("LINE_IN_L"),
> +SND_SOC_DAPM_INPUT("LINE_IN_R"),
> +
> +SND_SOC_DAPM_OUTPUT("LFE_OUT"),
> +SND_SOC_DAPM_OUTPUT("CENTER_OUT"),
> +SND_SOC_DAPM_OUTPUT("LINE_OUT_L"),
> +SND_SOC_DAPM_OUTPUT("LINE_OUT_R"),
> +SND_SOC_DAPM_OUTPUT("MONO_OUT"),
> +SND_SOC_DAPM_OUTPUT("HP_OUT_L"),
> +SND_SOC_DAPM_OUTPUT("HP_OUT_R"),
> +};
> +
> +static const struct snd_soc_dapm_route ad1980_dapm_routes[] = {
> +	{ "Capture", NULL, "MIC1" },
> +	{ "Capture", NULL, "MIC2" },
> +	{ "Capture", NULL, "CD_L" },
> +	{ "Capture", NULL, "CD_R" },
> +	{ "Capture", NULL, "AUX_L" },
> +	{ "Capture", NULL, "AUX_R" },
> +	{ "Capture", NULL, "LINE_IN_L" },
> +	{ "Capture", NULL, "LINE_IN_R" },
> +
> +	{ "LFE_OUT", NULL, "Playback" },
> +	{ "CENTER_OUT", NULL, "Playback" },
> +	{ "LINE_OUT_L", NULL, "Playback" },
> +	{ "LINE_OUT_R", NULL, "Playback" },
> +	{ "MONO_OUT", NULL, "Playback" },
> +	{ "HP_OUT_L", NULL, "Playback" },
> +	{ "HP_OUT_R", NULL, "Playback" },
> +};
> +
>  static unsigned int ac97_read(struct snd_soc_codec *codec,
>  	unsigned int reg)
>  {
> @@ -253,6 +291,11 @@ static struct snd_soc_codec_driver soc_codec_dev_ad1980 = {
>  	.reg_cache_step = 2,
>  	.write = ac97_write,
>  	.read = ac97_read,
> +
> +	.dapm_widgets = ad1980_dapm_widgets,
> +	.num_dapm_widgets = ARRAY_SIZE(ad1980_dapm_widgets),
> +	.dapm_routes = ad1980_dapm_routes,
> +	.num_dapm_routes = ARRAY_SIZE(ad1980_dapm_routes),
>  };
>  
>  static int ad1980_probe(struct platform_device *pdev)
> 

      reply	other threads:[~2013-08-07  7:52 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-06 22:51 [PATCH] ASoC: ad1980: Provide stub DAPM support Mark Brown
2013-08-07  7:53 ` Lars-Peter Clausen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5201FCDE.2070100@metafoo.de \
    --to=lars@metafoo.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=broonie@linaro.org \
    --cc=lgirdwood@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).