alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Anssi Hannula <anssi.hannula@iki.fi>
To: James Le Cuirot <chewi@aura-online.co.uk>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Subject: Re: [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support
Date: Tue, 13 May 2014 15:27:47 +0300	[thread overview]
Message-ID: <53720FC3.7000608@iki.fi> (raw)
In-Reply-To: <20140513130126.1755fa16@red.yakaraplc.local>

Hi,

13.05.2014 15:01, James Le Cuirot kirjoitti:
>>>>>>>>>
>>>>>>>>> Hi Anssi. Many thanks for your work on this. I am very keen to
>>>>>>>>> test this new code but have so far been unsuccessful. I have a
>>>>>>>>> Radeon 4670 (Sapphire branded) connected to a Yamaha RX-V773.
>>>>>>>>> I am running the sound/for-next kernel (82755ab) with your
>>>>>>>>> "missing PCM SAD" patch applied.
>>>>>>>>>
[...]
> Guess it wasn't so "soon" after all. This dropped down my priority
> list and then my receiver blew up. I ended up getting the newer
> equivalent model, the RX-V775. Despite that, the problem persists,
> even on a current sound "master" kernel.
> 
> There has been a little change though. I now get an ELD. This shows
> what I would expect based on my receiver.
> 
> https://gist.github.com/chewi/7628058
> 
> I note that speaker-test doesn't allow me to specify -c6 anymore, only
> -c8. Maybe that's because of the ELD. I do have a kernel log but not to
> hand right now. It only seems to show what appears to be normal output
> anyway.
> 
> I was keen to try fglrx but realised I can't because this card is only
> supported by the legacy driver and that only works with kernels up to
> around 3.7.
> 
> I did try my wife's Ivy Bridge laptop and that worked straight away
> with no difficulties using the same HDMI cable so it seems that the
> receiver isn't to blame.
> 
> I wanted to rule my Gentoo system out so I booted with Ubuntu 14.04 on
> a USB stick and got exactly the same results.
> 
> I've tried everything else I can think of like not having my stereo
> monitor connected at the same time. I would dig in to the code but as
> you have previously commented, everything *looks* fine, so I don't know
> where to begin. I may just have to get a newer card but that wasn't an
> investment I was planning to make just yet. :( Any further suggestions
> are appreciated.

Unfortunately I've been told that HD 4xxx cards and older do not support
multichannel playback, which I didn't know at the time (and I had
forgotten your case, hence I didn't get back to you - sorry about that).

It is a bug that the driver allows the user to try to playback more than
2 channels on such cards as well, which I have in my TODO list to fix.
Thanks for the reminder, though I guess it doesn't help much with your
situation.

-- 
Anssi Hannula

  reply	other threads:[~2014-05-13 13:04 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-24 18:10 [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-10-24 18:10 ` [PATCH 1/5] ALSA: hda - hdmi: Allow HDA patches to customize more operations Anssi Hannula
2013-10-24 18:10 ` [PATCH 2/5] ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support Anssi Hannula
2013-10-24 18:10 ` [PATCH 3/5] ALSA: hda - hdmi: Add ELD emulation for ATI/AMD codecs Anssi Hannula
2013-10-24 18:10 ` [PATCH 4/5] ALSA: hda - hdmi: Add HBR bitstreaming support for ATI/AMD HDMI codecs Anssi Hannula
2013-10-24 18:10 ` [PATCH 5/5] ALSA: hda - hdmi: Disable ramp-up/down for non-PCM on AMD codecs Anssi Hannula
2013-10-24 19:00   ` Anssi Hannula
2013-10-24 18:26 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-11-08  5:08   ` Olivier Langlois
2013-11-08 10:27     ` Anssi Hannula
2013-11-08 18:17       ` Olivier Langlois
2013-11-08 21:28         ` Olivier Langlois
2013-11-08 22:03           ` Anssi Hannula
2013-11-10  5:42             ` Olivier Langlois
2013-11-10  6:01               ` Anssi Hannula
2013-11-10  7:25                 ` speaker-test chmap bugs (was: [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support) Anssi Hannula
2013-11-10 18:29                   ` [PATCH 1/3] speaker-test: Fix chmapped channel selection without specified chmap Anssi Hannula
2013-11-10 18:29                     ` [PATCH 2/3] speaker-test: Always show chmap channel names if available Anssi Hannula
2013-11-10 18:29                     ` [PATCH 3/3] speaker-test: Show out-of-chmap channels as Unknown Anssi Hannula
2013-11-11 15:56                     ` [PATCH 1/3] speaker-test: Fix chmapped channel selection without specified chmap Takashi Iwai
2013-11-11 20:23                       ` Anssi Hannula
2013-11-11 22:04                         ` [PATCH 1/3 v2] " Anssi Hannula
2013-11-12  8:11                           ` Takashi Iwai
2013-11-12 12:34                             ` Anssi Hannula
2013-11-12 13:08                               ` Takashi Iwai
2013-11-12  6:35                 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Olivier Langlois
2013-11-14  0:04                   ` Anssi Hannula
2013-11-09  8:35         ` Takashi Iwai
2013-10-24 23:04 ` Takashi Iwai
2013-10-25 16:54   ` Andre Heider
2013-10-25 17:13     ` Takashi Iwai
2013-10-25 17:23     ` Anssi Hannula
2013-10-25 18:25       ` Andre Heider
2013-10-28 17:52       ` Andre Heider
2013-10-28 18:12         ` Anssi Hannula
2013-10-28 18:17           ` Andre Heider
2013-10-28 18:25             ` Anssi Hannula
2013-10-28 18:35               ` Andre Heider
2013-10-28 20:35                 ` Anssi Hannula
2013-10-28 22:00                   ` Andre Heider
2013-10-28 22:42                     ` Anssi Hannula
2013-10-28 23:15                       ` Andre Heider
2013-10-29 19:52                         ` LANGLOIS Olivier PIS -EXT
2013-10-29 20:30                           ` Anssi Hannula
2013-10-28 23:19                       ` [PATCH] drm/radeon/audio: fix missing multichannel PCM SAD in some cases Anssi Hannula
2013-10-31 23:38                         ` Rafał Miłecki
2013-10-31 23:46                           ` Rafał Miłecki
2013-10-31 23:52                           ` Anssi Hannula
2013-11-02  1:01                         ` Rafał Miłecki
2013-11-02  1:08                           ` Anssi Hannula
2013-11-02  1:15                             ` Rafał Miłecki
2013-11-02  1:03                         ` Rafał Miłecki
2013-11-02 15:32 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-11-23  1:05 ` James Le Cuirot
2013-11-23  1:29   ` Anssi Hannula
2013-11-23 15:40     ` James Le Cuirot
2013-11-23 15:45       ` Anssi Hannula
2013-11-24 14:57         ` James Le Cuirot
2013-11-25 13:20           ` Anssi Hannula
2013-11-25 14:32             ` James Le Cuirot
2013-11-25 14:56               ` Anssi Hannula
2014-05-13 12:01                 ` James Le Cuirot
2014-05-13 12:27                   ` Anssi Hannula [this message]
2014-05-13 16:16                     ` James Le Cuirot
2014-05-13 21:10                       ` James Le Cuirot
2014-05-13 21:50                         ` Anssi Hannula
2014-05-14 13:04                           ` Deucher, Alexander
2014-05-14 13:19                             ` James Le Cuirot
2013-11-25 15:07   ` Raymond Yau
2013-11-25 15:32     ` James Le Cuirot
2013-11-25 19:35     ` Anssi Hannula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53720FC3.7000608@iki.fi \
    --to=anssi.hannula@iki.fi \
    --cc=alsa-devel@alsa-project.org \
    --cc=chewi@aura-online.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).