[PATCH] ALSA: hda - Add a de-pop quirk for some HP machines

[PATCH] ALSA: hda - Add a de-pop quirk for some HP machines

[Hui Wang]

On some HP machines, there will be pop noise when the machine is
shutting down, rebooting or booting up from poweroff state.

Set EAPD enable only when stream starts can help to fix this
problem.

[The patch was originally written by Kailang, we tested it and
rebased it on latest kernel.]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
---
 sound/pci/hda/patch_realtek.c | 55 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 52 insertions(+), 3 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 48d6d10..51811a6 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4282,6 +4282,47 @@ static void alc290_fixup_mono_speakers(struct hda_codec *codec,
 	}
 }
 
+/*
+ * ALC290 PCM hooks
+ */
+static void alc290_playback_pcm_hook(struct hda_pcm_stream *hinfo,
+				     struct hda_codec *codec,
+				     struct snd_pcm_substream *substream,
+				     int action)
+{
+	int val;
+
+	switch (action) {
+	case HDA_GEN_PCM_ACT_OPEN:
+		val = alc_read_coef_idx(codec, 0x4); /* EAPD manual high */
+		if ((val & 0xc000) != 0xc000)
+			alc_write_coef_idx(codec, 0x4, val | (1<<14));
+		break;
+	}
+}
+
+static void alc290_fixup_pop_noise(struct hda_codec *codec,
+				   const struct hda_fixup *fix, int action)
+{
+	struct alc_spec *spec = codec->spec;
+	int val;
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		snd_hda_codec_write(codec, 0x17, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+		val = alc_read_coef_idx(codec, 0x4);
+		if ((val & 0xc000) != 0xc000)
+			alc_write_coef_idx(codec, 0x4, val | (3<<14)); /* EAPD low */
+		spec->gen.pcm_playback_hook = alc290_playback_pcm_hook;
+		break;
+	case HDA_FIXUP_ACT_INIT:
+		snd_hda_codec_write(codec, 0x17, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+		break;
+	}
+}
+
 /* for hda_fixup_thinkpad_acpi() */
 #include "thinkpad_helper.c"
 
@@ -4354,6 +4395,7 @@ enum {
 	ALC283_FIXUP_BXBT2807_MIC,
 	ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED,
 	ALC282_FIXUP_ASPIRE_V5_PINS,
+	ALC290_FIXUP_HP_DEPOP_WITH_MUTE_LED,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -4817,7 +4859,12 @@ static const struct hda_fixup alc269_fixups[] = {
 			{ },
 		},
 	},
-
+	[ALC290_FIXUP_HP_DEPOP_WITH_MUTE_LED] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc290_fixup_pop_noise,
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HP_MUTE_LED_MIC1,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -4975,12 +5022,14 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x2280, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2281, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x2282, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
-	SND_PCI_QUIRK(0x103c, 0x2289, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+	SND_PCI_QUIRK(0x103c, 0x2289, "HP", ALC290_FIXUP_HP_DEPOP_WITH_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x228a, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x228b, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
-	SND_PCI_QUIRK(0x103c, 0x228c, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+	SND_PCI_QUIRK(0x103c, 0x228c, "HP", ALC290_FIXUP_HP_DEPOP_WITH_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x228d, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x228e, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+	SND_PCI_QUIRK(0x103c, 0x228f, "HP", ALC290_FIXUP_HP_DEPOP_WITH_MUTE_LED),
+	SND_PCI_QUIRK(0x103c, 0x22a8, "HP", ALC290_FIXUP_HP_DEPOP_WITH_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x22c5, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x22c6, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x22c7, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
-- 
1.9.1

Re: [PATCH] ALSA: hda - Add a de-pop quirk for some HP machines

[Takashi Iwai]

At Fri, 29 Aug 2014 15:47:05 +0800,
Hui Wang wrote:
> 
> On some HP machines, there will be pop noise when the machine is
> shutting down, rebooting or booting up from poweroff state.
> 
> Set EAPD enable only when stream starts can help to fix this
> problem.
> 
> [The patch was originally written by Kailang, we tested it and
> rebased it on latest kernel.]
> 
> Signed-off-by: Kailang Yang <kailang@realtek.com>
> Signed-off-by: Hui Wang <hui.wang@canonical.com>
> ---
>  sound/pci/hda/patch_realtek.c | 55 ++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 52 insertions(+), 3 deletions(-)
> 
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 48d6d10..51811a6 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -4282,6 +4282,47 @@ static void alc290_fixup_mono_speakers(struct hda_codec *codec,
>  	}
>  }
>  
> +/*
> + * ALC290 PCM hooks
> + */
> +static void alc290_playback_pcm_hook(struct hda_pcm_stream *hinfo,
> +				     struct hda_codec *codec,
> +				     struct snd_pcm_substream *substream,
> +				     int action)
> +{
> +	int val;
> +
> +	switch (action) {
> +	case HDA_GEN_PCM_ACT_OPEN:
> +		val = alc_read_coef_idx(codec, 0x4); /* EAPD manual high */
> +		if ((val & 0xc000) != 0xc000)
> +			alc_write_coef_idx(codec, 0x4, val | (1<<14));
> +		break;
> +	}
> +}
> +
> +static void alc290_fixup_pop_noise(struct hda_codec *codec,
> +				   const struct hda_fixup *fix, int action)
> +{
> +	struct alc_spec *spec = codec->spec;
> +	int val;
> +
> +	switch (action) {
> +	case HDA_FIXUP_ACT_PRE_PROBE:
> +		snd_hda_codec_write(codec, 0x17, 0,
> +				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);

Why do you need this...

> +		val = alc_read_coef_idx(codec, 0x4);
> +		if ((val & 0xc000) != 0xc000)
> +			alc_write_coef_idx(codec, 0x4, val | (3<<14)); /* EAPD low */
> +		spec->gen.pcm_playback_hook = alc290_playback_pcm_hook;
> +		break;
> +	case HDA_FIXUP_ACT_INIT:
> +		snd_hda_codec_write(codec, 0x17, 0,
> +				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);

... and this?  There is no explanation about this change.

Also, can't you just set EAPD low in the shutdown callback instead?

In your patch, if the machine goes shutdown/reboot while playing a
stream (or before runtime PM), it's still EAPD high, so the noise
should be heard, if I understand correctly.


Takashi

Re: [PATCH] ALSA: hda - Add a de-pop quirk for some HP machines

[hwang4]

On 2014年08月29日 16:02, Takashi Iwai wrote:
> At Fri, 29 Aug 2014 15:47:05 +0800,
> Hui Wang wrote:
>> On some HP machines, there will be pop noise when the machine is
>> shutting down, rebooting or booting up from poweroff state.
>>
>> Set EAPD enable only when stream starts can help to fix this
>> problem.
>>
>> [The patch was originally written by Kailang, we tested it and
>> rebased it on latest kernel.]
>>
>> Signed-off-by: Kailang Yang <kailang@realtek.com>
>> Signed-off-by: Hui Wang <hui.wang@canonical.com>
>> ---
>>   sound/pci/hda/patch_realtek.c | 55 ++++++++++++++++++++++++++++++++++++++++---
>>   1 file changed, 52 insertions(+), 3 deletions(-)
>>
>> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
>> index 48d6d10..51811a6 100644
>> --- a/sound/pci/hda/patch_realtek.c
>> +++ b/sound/pci/hda/patch_realtek.c
>> @@ -4282,6 +4282,47 @@ static void alc290_fixup_mono_speakers(struct hda_codec *codec,
>>   	}
>>   }
>>   
>> +/*
>> + * ALC290 PCM hooks
>> + */
>> +static void alc290_playback_pcm_hook(struct hda_pcm_stream *hinfo,
>> +				     struct hda_codec *codec,
>> +				     struct snd_pcm_substream *substream,
>> +				     int action)
>> +{
>> +	int val;
>> +
>> +	switch (action) {
>> +	case HDA_GEN_PCM_ACT_OPEN:
>> +		val = alc_read_coef_idx(codec, 0x4); /* EAPD manual high */
>> +		if ((val & 0xc000) != 0xc000)
>> +			alc_write_coef_idx(codec, 0x4, val | (1<<14));
>> +		break;
>> +	}
>> +}
>> +
>> +static void alc290_fixup_pop_noise(struct hda_codec *codec,
>> +				   const struct hda_fixup *fix, int action)
>> +{
>> +	struct alc_spec *spec = codec->spec;
>> +	int val;
>> +
>> +	switch (action) {
>> +	case HDA_FIXUP_ACT_PRE_PROBE:
>> +		snd_hda_codec_write(codec, 0x17, 0,
>> +				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
> Why do you need this...
>
>> +		val = alc_read_coef_idx(codec, 0x4);
>> +		if ((val & 0xc000) != 0xc000)
>> +			alc_write_coef_idx(codec, 0x4, val | (3<<14)); /* EAPD low */
>> +		spec->gen.pcm_playback_hook = alc290_playback_pcm_hook;
>> +		break;
>> +	case HDA_FIXUP_ACT_INIT:
>> +		snd_hda_codec_write(codec, 0x17, 0,
>> +				    AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
> ... and this?  There is no explanation about this change.
>
> Also, can't you just set EAPD low in the shutdown callback instead?
Good idea, all will be addressed in the V2.

Thanks,
Hui.
> In your patch, if the machine goes shutdown/reboot while playing a
> stream (or before runtime PM), it's still EAPD high, so the noise
> should be heard, if I understand correctly.
>
>
> Takashi
>
>

RE: [PATCH] ALSA: hda - Add a de-pop quirk for some HP machines

[Kailang]

 

> -----Original Message-----
> From: Takashi Iwai [mailto:tiwai@suse.de] 
> Sent: Friday, August 29, 2014 4:03 PM
> To: Hui Wang
> Cc: alsa-devel@alsa-project.org; Kailang; stable@vger.kernel.org
> Subject: Re: [PATCH] ALSA: hda - Add a de-pop quirk for some 
> HP machines
> 
> At Fri, 29 Aug 2014 15:47:05 +0800,
> Hui Wang wrote:
> > 
> > On some HP machines, there will be pop noise when the machine is 
> > shutting down, rebooting or booting up from poweroff state.
> > 
> > Set EAPD enable only when stream starts can help to fix 
> this problem.
> > 
> > [The patch was originally written by Kailang, we tested it 
> and rebased 
> > it on latest kernel.]
> > 
> > Signed-off-by: Kailang Yang <kailang@realtek.com>
> > Signed-off-by: Hui Wang <hui.wang@canonical.com>
> > ---
> >  sound/pci/hda/patch_realtek.c | 55 
> > ++++++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 52 insertions(+), 3 deletions(-)
> > 
> > diff --git a/sound/pci/hda/patch_realtek.c 
> > b/sound/pci/hda/patch_realtek.c index 48d6d10..51811a6 100644
> > --- a/sound/pci/hda/patch_realtek.c
> > +++ b/sound/pci/hda/patch_realtek.c
> > @@ -4282,6 +4282,47 @@ static void 
> alc290_fixup_mono_speakers(struct hda_codec *codec,
> >  	}
> >  }
> >  
> > +/*
> > + * ALC290 PCM hooks
> > + */
> > +static void alc290_playback_pcm_hook(struct hda_pcm_stream *hinfo,
> > +				     struct hda_codec *codec,
> > +				     struct snd_pcm_substream 
> *substream,
> > +				     int action)
> > +{
> > +	int val;
> > +
> > +	switch (action) {
> > +	case HDA_GEN_PCM_ACT_OPEN:
> > +		val = alc_read_coef_idx(codec, 0x4); /* EAPD 
> manual high */
> > +		if ((val & 0xc000) != 0xc000)
> > +			alc_write_coef_idx(codec, 0x4, val | (1<<14));
> > +		break;
> > +	}
> > +}
> > +
> > +static void alc290_fixup_pop_noise(struct hda_codec *codec,
> > +				   const struct hda_fixup *fix, 
> int action) {
> > +	struct alc_spec *spec = codec->spec;
> > +	int val;
> > +
> > +	switch (action) {
> > +	case HDA_FIXUP_ACT_PRE_PROBE:
> > +		snd_hda_codec_write(codec, 0x17, 0,
> > +				    
> AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
> 
> Why do you need this...

This is reauest by HP. They say Keep this to output will lower pop noise from woofer speaker.

> 
> > +		val = alc_read_coef_idx(codec, 0x4);
> > +		if ((val & 0xc000) != 0xc000)
> > +			alc_write_coef_idx(codec, 0x4, val | 
> (3<<14)); /* EAPD low */
> > +		spec->gen.pcm_playback_hook = alc290_playback_pcm_hook;
> > +		break;
> > +	case HDA_FIXUP_ACT_INIT:
> > +		snd_hda_codec_write(codec, 0x17, 0,
> > +				    
> AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
> 
> ... and this?  There is no explanation about this change.
> 
> Also, can't you just set EAPD low in the shutdown callback instead?
> 
> In your patch, if the machine goes shutdown/reboot while 
> playing a stream (or before runtime PM), it's still EAPD 
> high, so the noise should be heard, if I understand correctly.
> 

EAPD keep high, no change state will no pop noise. EC will control the delay for 30s to do AMP pin to high.
When it enter to S3, EAPD will go low. Resume back, the eapd will go high. It will show pop noise.
This is not have method to improve for this hardware issue in this state.

> 
> Takashi
> 
> ------Please consider the environment before printing this e-mail.
> 

Re: [PATCH] ALSA: hda - Add a de-pop quirk for some HP machines

[Takashi Iwai]

At Fri, 29 Aug 2014 08:29:52 +0000,
Kailang wrote:
> 
>  
> 
> > -----Original Message-----
> > From: Takashi Iwai [mailto:tiwai@suse.de] 
> > Sent: Friday, August 29, 2014 4:03 PM
> > To: Hui Wang
> > Cc: alsa-devel@alsa-project.org; Kailang; stable@vger.kernel.org
> > Subject: Re: [PATCH] ALSA: hda - Add a de-pop quirk for some 
> > HP machines
> > 
> > At Fri, 29 Aug 2014 15:47:05 +0800,
> > Hui Wang wrote:
> > > 
> > > On some HP machines, there will be pop noise when the machine is 
> > > shutting down, rebooting or booting up from poweroff state.
> > > 
> > > Set EAPD enable only when stream starts can help to fix 
> > this problem.
> > > 
> > > [The patch was originally written by Kailang, we tested it 
> > and rebased 
> > > it on latest kernel.]
> > > 
> > > Signed-off-by: Kailang Yang <kailang@realtek.com>
> > > Signed-off-by: Hui Wang <hui.wang@canonical.com>
> > > ---
> > >  sound/pci/hda/patch_realtek.c | 55 
> > > ++++++++++++++++++++++++++++++++++++++++---
> > >  1 file changed, 52 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/sound/pci/hda/patch_realtek.c 
> > > b/sound/pci/hda/patch_realtek.c index 48d6d10..51811a6 100644
> > > --- a/sound/pci/hda/patch_realtek.c
> > > +++ b/sound/pci/hda/patch_realtek.c
> > > @@ -4282,6 +4282,47 @@ static void 
> > alc290_fixup_mono_speakers(struct hda_codec *codec,
> > >  	}
> > >  }
> > >  
> > > +/*
> > > + * ALC290 PCM hooks
> > > + */
> > > +static void alc290_playback_pcm_hook(struct hda_pcm_stream *hinfo,
> > > +				     struct hda_codec *codec,
> > > +				     struct snd_pcm_substream 
> > *substream,
> > > +				     int action)
> > > +{
> > > +	int val;
> > > +
> > > +	switch (action) {
> > > +	case HDA_GEN_PCM_ACT_OPEN:
> > > +		val = alc_read_coef_idx(codec, 0x4); /* EAPD 
> > manual high */
> > > +		if ((val & 0xc000) != 0xc000)
> > > +			alc_write_coef_idx(codec, 0x4, val | (1<<14));
> > > +		break;
> > > +	}
> > > +}
> > > +
> > > +static void alc290_fixup_pop_noise(struct hda_codec *codec,
> > > +				   const struct hda_fixup *fix, 
> > int action) {
> > > +	struct alc_spec *spec = codec->spec;
> > > +	int val;
> > > +
> > > +	switch (action) {
> > > +	case HDA_FIXUP_ACT_PRE_PROBE:
> > > +		snd_hda_codec_write(codec, 0x17, 0,
> > > +				    
> > AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
> > 
> > Why do you need this...
> 
> This is reauest by HP. They say Keep this to output will lower pop noise from woofer speaker.

OK, then please add the comment.

> > > +		val = alc_read_coef_idx(codec, 0x4);
> > > +		if ((val & 0xc000) != 0xc000)
> > > +			alc_write_coef_idx(codec, 0x4, val | 
> > (3<<14)); /* EAPD low */
> > > +		spec->gen.pcm_playback_hook = alc290_playback_pcm_hook;
> > > +		break;
> > > +	case HDA_FIXUP_ACT_INIT:
> > > +		snd_hda_codec_write(codec, 0x17, 0,
> > > +				    
> > AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
> > 
> > ... and this?  There is no explanation about this change.
> > 
> > Also, can't you just set EAPD low in the shutdown callback instead?
> > 
> > In your patch, if the machine goes shutdown/reboot while 
> > playing a stream (or before runtime PM), it's still EAPD 
> > high, so the noise should be heard, if I understand correctly.
> > 
> 
> EAPD keep high, no change state will no pop noise. EC will control the delay for 30s to do AMP pin to high.
> When it enter to S3, EAPD will go low. Resume back, the eapd will go high. It will show pop noise.

The bug description is about the shutdown or the bootup, not S3.
But the cause is the same?

> This is not have method to improve for this hardware issue in this state.

Well, we really need more detailed description what the exact problem
is, what the patch does and how it fixes the issue.  The code change
itself looks trivial enough, but the more important thing -- the
information -- is missing in the patch.


thanks,

Takashi

Re: [alsa-devel] [PATCH] ALSA: hda - Add a de-pop quirk for some HP machines

[Hui Wang]

On 08/29/2014 06:06 PM, Takashi Iwai wrote:
> At Fri, 29 Aug 2014 08:29:52 +0000,
> Kailang wrote:
>>   
>>
>>> -----Original Message-----
>>> From: Takashi Iwai [mailto:tiwai@suse.de]
>>> Sent: Friday, August 29, 2014 4:03 PM
>>> To: Hui Wang
>>> Cc: alsa-devel@alsa-project.org; Kailang; stable@vger.kernel.org
>>> Subject: Re: [PATCH] ALSA: hda - Add a de-pop quirk for some
>>> HP machines
>>>
>>> At Fri, 29 Aug 2014 15:47:05 +0800,
>>> Hui Wang wrote:
>>>> On some HP machines, there will be pop noise when the machine is
>>>> shutting down, rebooting or booting up from poweroff state.
>>>>
>>>> Set EAPD enable only when stream starts can help to fix
>>> this problem.
>>>> [The patch was originally written by Kailang, we tested it
>>> and rebased
>>>> it on latest kernel.]
>>>>
>>>> Signed-off-by: Kailang Yang <kailang@realtek.com>
>>>> Signed-off-by: Hui Wang <hui.wang@canonical.com>
>>>> ---
>>>>   sound/pci/hda/patch_realtek.c | 55
>>>> ++++++++++++++++++++++++++++++++++++++++---
>>>>   1 file changed, 52 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/sound/pci/hda/patch_realtek.c
>>>> b/sound/pci/hda/patch_realtek.c index 48d6d10..51811a6 100644
>>>> --- a/sound/pci/hda/patch_realtek.c
>>>> +++ b/sound/pci/hda/patch_realtek.c
>>>> @@ -4282,6 +4282,47 @@ static void
>>> alc290_fixup_mono_speakers(struct hda_codec *codec,
>>>>   	}
>>>>   }
>>>>   
>>>> +/*
>>>> + * ALC290 PCM hooks
>>>> + */
>>>> +static void alc290_playback_pcm_hook(struct hda_pcm_stream *hinfo,
>>>> +				     struct hda_codec *codec,
>>>> +				     struct snd_pcm_substream
>>> *substream,
>>>> +				     int action)
>>>> +{
>>>> +	int val;
>>>> +
>>>> +	switch (action) {
>>>> +	case HDA_GEN_PCM_ACT_OPEN:
>>>> +		val = alc_read_coef_idx(codec, 0x4); /* EAPD
>>> manual high */
>>>> +		if ((val & 0xc000) != 0xc000)
>>>> +			alc_write_coef_idx(codec, 0x4, val | (1<<14));
>>>> +		break;
>>>> +	}
>>>> +}
>>>> +
>>>> +static void alc290_fixup_pop_noise(struct hda_codec *codec,
>>>> +				   const struct hda_fixup *fix,
>>> int action) {
>>>> +	struct alc_spec *spec = codec->spec;
>>>> +	int val;
>>>> +
>>>> +	switch (action) {
>>>> +	case HDA_FIXUP_ACT_PRE_PROBE:
>>>> +		snd_hda_codec_write(codec, 0x17, 0,
>>>> +				
>>> AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
>>>
>>> Why do you need this...
>> This is reauest by HP. They say Keep this to output will lower pop noise from woofer speaker.
> OK, then please add the comment.
>
>>>> +		val = alc_read_coef_idx(codec, 0x4);
>>>> +		if ((val & 0xc000) != 0xc000)
>>>> +			alc_write_coef_idx(codec, 0x4, val |
>>> (3<<14)); /* EAPD low */
>>>> +		spec->gen.pcm_playback_hook = alc290_playback_pcm_hook;
>>>> +		break;
>>>> +	case HDA_FIXUP_ACT_INIT:
>>>> +		snd_hda_codec_write(codec, 0x17, 0,
>>>> +				
>>> AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
>>>
>>> ... and this?  There is no explanation about this change.
>>>
>>> Also, can't you just set EAPD low in the shutdown callback instead?
>>>
>>> In your patch, if the machine goes shutdown/reboot while
>>> playing a stream (or before runtime PM), it's still EAPD
>>> high, so the noise should be heard, if I understand correctly.
>>>
>> EAPD keep high, no change state will no pop noise. EC will control the delay for 30s to do AMP pin to high.
>> When it enter to S3, EAPD will go low. Resume back, the eapd will go high. It will show pop noise.
> The bug description is about the shutdown or the bootup, not S3.
> But the cause is the same?
>
>> This is not have method to improve for this hardware issue in this state.
> Well, we really need more detailed description what the exact problem
> is, what the patch does and how it fixes the issue.  The code change
> itself looks trivial enough, but the more important thing -- the
> information -- is missing in the patch.
I just checked again, this fix is for two bugs, one is the pop noise 
occurs when resume from S3, another is the pop noise occurs when 
shutdown, reboot, and boot from poweroff. It seems this bug can fix all 
of them.

I will gather more information and add detailed description in the V2.


Thanks,
Hui.
>
> thanks,
>
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

RE: [PATCH] ALSA: hda - Add a de-pop quirk for some HP machines

[Kailang]

 
Hi Luke,

Could you describe this issue for how to solve?

BR,
Kailang

> -----Original Message-----
> From: Kailang 
> Sent: Friday, August 29, 2014 4:30 PM
> To: 'Takashi Iwai'; Hui Wang
> Cc: alsa-devel@alsa-project.org; stable@vger.kernel.org
> Subject: RE: [PATCH] ALSA: hda - Add a de-pop quirk for some 
> HP machines
> 
>  
> 
> > -----Original Message-----
> > From: Takashi Iwai [mailto:tiwai@suse.de]
> > Sent: Friday, August 29, 2014 4:03 PM
> > To: Hui Wang
> > Cc: alsa-devel@alsa-project.org; Kailang; stable@vger.kernel.org
> > Subject: Re: [PATCH] ALSA: hda - Add a de-pop quirk for some HP 
> > machines
> > 
> > At Fri, 29 Aug 2014 15:47:05 +0800,
> > Hui Wang wrote:
> > > 
> > > On some HP machines, there will be pop noise when the machine is 
> > > shutting down, rebooting or booting up from poweroff state.
> > > 
> > > Set EAPD enable only when stream starts can help to fix
> > this problem.
> > > 
> > > [The patch was originally written by Kailang, we tested it
> > and rebased
> > > it on latest kernel.]
> > > 
> > > Signed-off-by: Kailang Yang <kailang@realtek.com>
> > > Signed-off-by: Hui Wang <hui.wang@canonical.com>
> > > ---
> > >  sound/pci/hda/patch_realtek.c | 55
> > > ++++++++++++++++++++++++++++++++++++++++---
> > >  1 file changed, 52 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/sound/pci/hda/patch_realtek.c 
> > > b/sound/pci/hda/patch_realtek.c index 48d6d10..51811a6 100644
> > > --- a/sound/pci/hda/patch_realtek.c
> > > +++ b/sound/pci/hda/patch_realtek.c
> > > @@ -4282,6 +4282,47 @@ static void
> > alc290_fixup_mono_speakers(struct hda_codec *codec,
> > >  	}
> > >  }
> > >  
> > > +/*
> > > + * ALC290 PCM hooks
> > > + */
> > > +static void alc290_playback_pcm_hook(struct 
> hda_pcm_stream *hinfo,
> > > +				     struct hda_codec *codec,
> > > +				     struct snd_pcm_substream
> > *substream,
> > > +				     int action)
> > > +{
> > > +	int val;
> > > +
> > > +	switch (action) {
> > > +	case HDA_GEN_PCM_ACT_OPEN:
> > > +		val = alc_read_coef_idx(codec, 0x4); /* EAPD
> > manual high */
> > > +		if ((val & 0xc000) != 0xc000)
> > > +			alc_write_coef_idx(codec, 0x4, val | (1<<14));
> > > +		break;
> > > +	}
> > > +}
> > > +
> > > +static void alc290_fixup_pop_noise(struct hda_codec *codec,
> > > +				   const struct hda_fixup *fix,
> > int action) {
> > > +	struct alc_spec *spec = codec->spec;
> > > +	int val;
> > > +
> > > +	switch (action) {
> > > +	case HDA_FIXUP_ACT_PRE_PROBE:
> > > +		snd_hda_codec_write(codec, 0x17, 0,
> > > +				    
> > AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
> > 
> > Why do you need this...
> 
> This is reauest by HP. They say Keep this to output will 
> lower pop noise from woofer speaker.
> 
> > 
> > > +		val = alc_read_coef_idx(codec, 0x4);
> > > +		if ((val & 0xc000) != 0xc000)
> > > +			alc_write_coef_idx(codec, 0x4, val |
> > (3<<14)); /* EAPD low */
> > > +		spec->gen.pcm_playback_hook = alc290_playback_pcm_hook;
> > > +		break;
> > > +	case HDA_FIXUP_ACT_INIT:
> > > +		snd_hda_codec_write(codec, 0x17, 0,
> > > +				    
> > AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
> > 
> > ... and this?  There is no explanation about this change.
> > 
> > Also, can't you just set EAPD low in the shutdown callback instead?
> > 
> > In your patch, if the machine goes shutdown/reboot while playing a 
> > stream (or before runtime PM), it's still EAPD high, so the noise 
> > should be heard, if I understand correctly.
> > 
> 
> EAPD keep high, no change state will no pop noise. EC will 
> control the delay for 30s to do AMP pin to high.
> When it enter to S3, EAPD will go low. Resume back, the eapd 
> will go high. It will show pop noise.
> This is not have method to improve for this hardware issue in 
> this state.
> 
> > 
> > Takashi
> > 
> > ------Please consider the environment before printing this e-mail.
> >