Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Anssi Hannula <anssi.hannula@iki.fi>
To: David Henningsson <david.henningsson@canonical.com>
Cc: Alex Deucher <alexander.deucher@amd.com>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Subject: Re: Radeon unconnected HDMI eats samples at 280 kHz
Date: Thu, 18 Sep 2014 00:26:54 +0300	[thread overview]
Message-ID: <5419FC9E.9010302@iki.fi> (raw)
In-Reply-To: <54198F38.30002@canonical.com>

17.09.2014, 16:40, David Henningsson kirjoitti:
> Hi,

Hi,

> While investigating some interesting debug output from PulseAudio, I 
> tried to figure out the cause.
> 
>  From what I can tell, my Radeon seems to ask for new samples at a very 
> high rate, which I estimate to be around 280 kHz. My radeon card has 
> DVI, HDMI and VGA connectors, and the only thing connected is my screen 
> over DVI.
> 
> I'm currently running the 3.13 kernel with updated hda directory from 
> Takashi's tree, but I think it's been this way for a long time.
> 
> Note that if a screen is connected to the HDMI card, the problem 
> disappears and sample rates are normal.
> In short, do you think this is a driver bug, or just something we have 
> to live with as some sort of hw anomaly?
> Since nothing is connected, it does not really hurt, except PulseAudio 
> gets confused (in a way that could potentially cause problems for 
> low-latency output, should something be connected later on).

Not sure.
IIRC, unlike the other gpus, on radeon the video driver needs to
"manually" set sample rate dividers/etc based on the pixel clock rate,
so I guess this might mean we can't have a proper audio clock without
enabled video...

Alex, any thoughts/info?


If this is the case, it would probably be best if we prevented opening
the device when output is not active (unless this causes some other
issues), but I guess there is currently no easy way for the _audio_
driver to know that...


> For reference, here's lspci of the HDMI card:
> 
> 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. 
> [AMD/ATI] RV710 [Radeon HD 4550] [1002:9540] (prog-if 00 [VGA controller])
> 	Subsystem: PC Partner Limited / Sapphire Technology Device [174b:e106]
> 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] 
> RV710/730 HDMI Audio [Radeon HD 4000 series] [1002:aa38]
> 	Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aa38]
> 
> 


-- 
Anssi Hannula

  reply	other threads:[~2014-09-17 21:26 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-17 13:40 Radeon unconnected HDMI eats samples at 280 kHz David Henningsson
2014-09-17 21:26 ` Anssi Hannula [this message]
2014-09-18  4:13   ` David Henningsson
2014-09-18  7:33     ` Takashi Iwai
2014-09-18  7:54       ` David Henningsson
2014-09-18 22:29         ` Deucher, Alexander
2014-09-19 13:38           ` David Henningsson
2014-09-19 14:14             ` Deucher, Alexander
2014-09-19 17:47               ` David Henningsson
2014-09-19 18:19                 ` Alexander E. Patrakov
2014-09-19 23:35                   ` David Henningsson
2014-09-20  9:37                     ` Anssi Hannula
2014-09-20  9:39                     ` Alexander E. Patrakov
2014-09-19 23:32                 ` Deucher, Alexander
2014-09-20  0:06                   ` David Henningsson
2014-09-20  9:31                     ` Alexander E. Patrakov
2014-09-22 12:46                     ` Deucher, Alexander
2014-09-22 14:39                       ` David Henningsson
2014-09-22 14:52                         ` Deucher, Alexander
2014-09-23  9:47                           ` David Henningsson
2014-09-23 14:07                             ` Deucher, Alexander
2014-09-24  9:27                               ` David Henningsson
2014-09-24 21:37                                 ` Deucher, Alexander
2014-09-30 12:24                                   ` David Henningsson
2014-09-30 12:45                                     ` Deucher, Alexander

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5419FC9E.9010302@iki.fi \
    --to=anssi.hannula@iki.fi \
    --cc=alexander.deucher@amd.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=david.henningsson@canonical.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox