From: Gilles Hemberg <gilles.hemberg@gmail.com>
To: alsa-devel@alsa-project.org
Subject: [bug] SPDIF (digital-out) not working on NForce4/CK804
Date: Thu, 02 Oct 2014 20:13:28 +0200 [thread overview]
Message-ID: <542D95C8.8060701@gmail.com> (raw)
Hi all,
Sorry to bump in like this, but I was advised to submit a bug-report for
the ALSA-drivers on my HTPC: no sound comes through out of my AVR when I
select the digital output through SPDIF (TOSLINK).
The relevant parts of my HTPC are as follows:
* CPU: Athlon64 X2 3800+
* Motherboard: ASUS A8N-SLI Deluxe motherboard (BIOS 1805) NForce4
with CK804 sound (relying on a Realtek ALC850 chip)
* RAM: 2x 512 MB DDR-400
* GPU: nVidia Geforce GT240 (which carries a HDMI port and uses the
snd-
* Receiver: Marantz SR7500 (supporting both Dolby Digital 5.1 and
DTS decoding), connected to motherboard's SPDIF TOSLINK port (optical) +
JBL 5.1 speaker-set
* OpenElec 4.2.0: Kernel 3.16.3, Alsa 1.0.28
Symptoms:
Speaker-test does not produce any sound. Command used is as follows:
speaker-test -c2 -r 48000 -D hw:0,2
No sound either from other applications (such as XBMC 13.2).
SPDIF worked flawlessly on the exact same hardware & connections using
Win7/XBMC.
Sound does come through the SPDIF when I use hw:0,0 (= analog device).
Things tried (none working):
* Blacklisting snd-hda-intel (= HDMI from my GPU) to make sure
CK804 is the only sound chip visible.
* amixer set 'IEC958 Playback AC97-SPSA' Playback 100% unmute
* Contacted XBMC developer via IRC for investigation: concluded
that problem would be with kernel driver, advised to create this bug-report.
* Tried another distro (Ubuntu from XBMCBuntu 13.0).
Further details which might be useful:
* alsa-info.sh output: http://pastebin.com/Bp2ZGfZb
* /proc/asound/card0/ac97#0-0: http://pastebin.com/Q5y1J0Ra
* /proc/asound/card0/ac97#0-0+regs: http://pastebin.com/tBbTCxZg
Similar reports found (no working solution):
http://mailman.alsa-project.org/pipermail/alsa-devel/2009-September/021336.html
http://askubuntu.com/questions/264272/no-sound-output-msi-k8n-neo4-ck804-ac97
http://askubuntu.com/questions/462605/new-install-of-ubuntu-14-04-trusty-3-audio-devices-no-sound
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=615225
http://ehc.ac/p/alsa/mailman/message/25973743/
http://wiki.linuxmce.org/index.php/ASUS_A8N-SLI_Deluxe
http://forum.xbmc.org/showthread.php?tid=156043&pid=1348176
http://forum.xbmc.org/showthread.php?tid=168608
http://ubuntuforums.org/showthread.php?t=2210288
http://cholla.mmto.org/computers/linux/sound/asus_a8ne.html
http://www.nvnews.net/vbulletin/showthread.php?t=80521
...
I am willing to test or provide further details where needed. I am new
to Linux, but am a developer myself (C#) so I know how to look up some
info... Hoping I haven't offended any of you with this post.
THNX,
Bye!
next reply other threads:[~2014-10-02 18:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 18:13 Gilles Hemberg [this message]
2014-10-03 7:31 ` [bug] SPDIF (digital-out) not working on NForce4/CK804 Raymond Yau
2014-10-03 21:02 ` Gilles Hemberg
2014-10-04 5:07 ` Raymond Yau
2014-10-04 9:34 ` Gilles Hemberg
2014-10-07 3:21 ` Raymond Yau
-- strict thread matches above, loose matches on Subject: below --
2014-10-03 6:04 Gilles Hemberg
2014-10-03 6:13 Gilles Hemberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542D95C8.8060701@gmail.com \
--to=gilles.hemberg@gmail.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox