From: David Henningsson <david.henningsson@canonical.com>
To: Chris J Arges <chris.j.arges@canonical.com>, alsa-devel@alsa-project.org
Cc: tiwai@suse.de, th55@gmx.de, robin@gareus.org, clemens@ladisch.de
Subject: Re: [PATCH 4/4 v4] ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20
Date: Tue, 04 Nov 2014 21:11:48 +0100 [thread overview]
Message-ID: <54593304.8080701@canonical.com> (raw)
In-Reply-To: <1415055496-11151-5-git-send-email-chris.j.arges@canonical.com>
On 2014-11-03 23:58, Chris J Arges wrote:
> This code contains the Scarlett mixer interface code that was originally
> written by Tobias Hoffman and Robin Gareus. Because the device doesn't
> properly implement UAC2 this code adds a mixer quirk for the device.
Thanks a lot for taking over - it surely has been done with better speed
than I would have.
> + * Code cleanup:
> + * David Henningsson <david.henningsson at canonical.com>
Thanks for the credit, not sure I deserve it though, all I did was to
squash the patches and fix the checkpatch errors :-)
> +static int scarlett_ctl_save_put(struct snd_kcontrol *kctl,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct usb_mixer_elem_info *elem = kctl->private_data;
> + struct snd_usb_audio *chip = elem->mixer->chip;
> + char buf[] = { 0x00, 0xa5 };
> + int err;
> +
> + if (ucontrol->value.enumerated.item[0] > 0) {
> + err = snd_usb_ctl_msg(chip->dev,
> + usb_sndctrlpipe(chip->dev, 0), UAC2_CS_MEM,
> + USB_RECIP_INTERFACE | USB_TYPE_CLASS |
> + USB_DIR_OUT, 0x005a, snd_usb_ctrl_intf(chip) |
> + (0x3c << 8), buf, 2);
> + if (err < 0)
> + return err;
> +
> + usb_audio_info(elem->mixer->chip,
> + "scarlett: saved settings to hardware.\n");
> + }
> + return 0;
> +}
To elaborate on Takashi's concern about this control, imagine e g what
alsactl restore/store being run on startup/shutdown. On shutdown,
alsactl store would read "0", and on startup, alsactl restore would
write "0", with the result that the hw would not store the values set.
Would it be possible to have an autosave instead? E g, whenever a value
is changed, it saves that value to the hardware. That's how other
hardware works and what userspace expects.
If you want to avoid a lot of autosaves, e g if the autosave takes a lot
of time before the hw responds, maybe you could do the autosave in a 10
ms delayed_work, or similar.
--
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
next prev parent reply other threads:[~2014-11-04 20:11 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 19:46 [PATCH v2] Scarlett mixer interface inclusion Chris J Arges
2014-10-21 19:46 ` [PATCH v2] Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20 Chris J Arges
2014-10-22 6:49 ` Takashi Iwai
2014-10-22 18:44 ` Chris J Arges
2014-10-29 20:55 ` [PATCH v3 0/4] Scarlett mixer interface inclusion Chris J Arges
2014-10-29 20:56 ` [PATCH v3 1/4] Revert "ALSA: usb-audio: Add quirk for Focusrite Scarlett Chris J Arges
2014-10-29 20:56 ` [PATCH v3 2/4] ALSA: usb-audio: Add usb_mixer_elem_enum_info Chris J Arges
2014-10-30 7:17 ` Takashi Iwai
2014-10-29 20:56 ` [PATCH v3 3/4] ALSA: usb-audio: make set_*_mix_values functions public Chris J Arges
2014-10-29 20:56 ` [PATCH v3 4/4] ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20 Chris J Arges
2014-10-30 7:43 ` Takashi Iwai
2014-11-03 17:11 ` Chris J Arges
2014-11-03 17:31 ` Clemens Ladisch
2014-10-30 7:11 ` [PATCH v3 0/4] Scarlett mixer interface inclusion Takashi Iwai
2014-11-03 22:58 ` [PATCH 0/4 v4] " Chris J Arges
2014-11-03 22:58 ` [PATCH 1/4 v4] Revert "ALSA: usb-audio: Add quirk for Focusrite Scarlett Chris J Arges
2014-11-03 22:58 ` [PATCH 2/4 v4] ALSA: usb-audio: Add private_data pointer to usb_mixer_elem_info Chris J Arges
2014-11-03 22:58 ` [PATCH 3/4 v4] ALSA: usb-audio: make set_*_mix_values functions public Chris J Arges
2014-11-03 22:58 ` [PATCH 4/4 v4] ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20 Chris J Arges
2014-11-04 10:18 ` Takashi Iwai
2014-11-04 13:16 ` Tobias Hoffmann
2014-11-04 13:29 ` Tobias Hoffmann
2014-11-04 19:45 ` Chris J Arges
2014-11-04 14:00 ` Takashi Iwai
2014-11-04 19:56 ` Chris J Arges
2014-11-04 19:51 ` Chris J Arges
2014-11-05 16:32 ` [PATCH v5] " Chris J Arges
2014-11-06 14:33 ` [PATCH 0/4 v5] Scarlett mixer interface inclusion Chris J Arges
2014-11-06 14:33 ` [PATCH 1/4 v5] Revert "ALSA: usb-audio: Add quirk for Focusrite Scarlett Chris J Arges
2014-11-06 14:33 ` [PATCH 2/4 v5] ALSA: usb-audio: Add private_data pointer to usb_mixer_elem_info Chris J Arges
2014-11-06 14:33 ` [PATCH 3/4 v5] ALSA: usb-audio: make set_*_mix_values functions public Chris J Arges
2014-11-06 14:33 ` [PATCH 4/4 v5] ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20 Chris J Arges
2014-11-07 10:15 ` Takashi Iwai
2014-11-10 18:59 ` [PATCH 0/4 v6] Scarlett mixer interface inclusion Chris J Arges
2014-11-10 18:59 ` [PATCH 1/4 v6] Revert "ALSA: usb-audio: Add quirk for Focusrite Scarlett Chris J Arges
2014-11-10 18:59 ` [PATCH 2/4 v6] ALSA: usb-audio: Add private_data pointer to usb_mixer_elem_info Chris J Arges
2014-11-10 18:59 ` [PATCH 3/4 v6] ALSA: usb-audio: make set_*_mix_values functions public Chris J Arges
2014-11-10 18:59 ` [PATCH 4/4 v6] ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20 Chris J Arges
2014-11-10 19:24 ` Takashi Iwai
2014-11-10 22:00 ` Chris J Arges
2014-11-11 7:33 ` Takashi Iwai
2014-11-12 18:06 ` [PATCH 0/4 v7] Scarlett mixer interface inclusion Chris J Arges
2014-11-12 18:06 ` [PATCH 1/4 v7] Revert "ALSA: usb-audio: Add quirk for Focusrite Scarlett Chris J Arges
2014-11-12 18:07 ` [PATCH 2/4 v7] ALSA: usb-audio: Add private_data pointer to usb_mixer_elem_info Chris J Arges
2014-11-12 18:07 ` [PATCH 3/4 v7] ALSA: usb-audio: make set_*_mix_values functions public Chris J Arges
2014-11-12 18:07 ` [PATCH 4/4 v7] ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20 Chris J Arges
2014-11-13 6:36 ` [PATCH 0/4 v7] Scarlett mixer interface inclusion Takashi Iwai
2014-11-13 6:38 ` David Henningsson
2014-11-13 13:01 ` Chris J Arges
2014-11-04 20:11 ` David Henningsson [this message]
2014-11-04 20:18 ` [PATCH 4/4 v4] ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20 Chris J Arges
2014-11-05 9:55 ` David Henningsson
2014-11-02 19:00 ` [PATCH v3 0/4] Scarlett mixer interface inclusion Dominik Haumann
2014-11-03 15:49 ` Chris J Arges
2014-11-03 22:31 ` Chris J Arges
2014-10-22 6:36 ` [PATCH v2] " Takashi Iwai
2014-11-05 11:33 ` Takashi Iwai
2014-11-05 12:39 ` Takashi Iwai
2014-11-05 14:20 ` Takashi Iwai
2014-11-05 14:30 ` Chris J Arges
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54593304.8080701@canonical.com \
--to=david.henningsson@canonical.com \
--cc=alsa-devel@alsa-project.org \
--cc=chris.j.arges@canonical.com \
--cc=clemens@ladisch.de \
--cc=robin@gareus.org \
--cc=th55@gmx.de \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox