From: Cyrus Harmon <cyrus@bobobeach.com>
To: Clemens Ladisch <clemens@ladisch.de>, alsa-devel@alsa-project.org
Subject: Re: [PATCH] add Steinberg UR44 USB Audio Interface support to quirks-table
Date: Wed, 05 Nov 2014 21:47:00 -0800 [thread overview]
Message-ID: <545B0B54.5080609@bobobeach.com> (raw)
In-Reply-To: <545A93E3.7020906@ladisch.de>
Clemens,
Here's what I get with the new (and old) patch(es):
[ 2.869556] usb 3-3.2: new high-speed USB device number 6 using xhci_hcd
[ 2.970810] usb 3-3.2: New USB device found, idVendor=0499,
idProduct=150e
[ 2.970813] usb 3-3.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.970814] usb 3-3.2: Product: Steinberg UR44
[ 2.970815] usb 3-3.2: Manufacturer: Yamaha Corporation
[ 2.973563] snd-usb-audio 3-3.2:1.0: checking PCM interface
[ 2.973565] snd-usb-audio 3-3.2:1.0: quirk return code: -19
[ 2.973566] snd-usb-audio 3-3.2:1.0: probe failed
[ 2.973574] snd-usb-audio: probe of 3-3.2:1.0 failed with error -5
[ 2.974003] snd-usb-audio 3-3.2:1.1: checking PCM interface
[ 2.974005] snd-usb-audio 3-3.2:1.1: altsets found
[ 2.974007] snd-usb-audio 3-3.2:1.1: endpoint found
[ 2.974008] snd-usb-audio 3-3.2:1.1: iso found
[ 2.974010] snd-usb-audio 3-3.2:1.1: descriptors found
[ 2.976115] snd-usb-audio 3-3.2:1.1: first interface successful
[ 2.976117] usb 3-3.2:1.0: checking PCM interface
[ 2.976117] usb 3-3.2:1.2: checking PCM interface
[ 2.976118] usb 3-3.2:1.2: altsets found
[ 2.976119] usb 3-3.2:1.2: endpoint found
[ 2.976120] usb 3-3.2:1.2: iso found
[ 2.976120] usb 3-3.2:1.2: descriptors found
[ 2.976641] usb 3-3.2: current rate 192000 is different from the
runtime rate 48000
[ 2.978137] snd-usb-audio 3-3.2:1.2: interface 2 successful
[ 2.978140] usb 3-3.2:1.3: checking PCM interface
[ 2.978148] snd-usb-audio 3-3.2:1.3: interface 3 successful
[ 2.978150] usb 3-3.2:1.4: checking PCM interface
[ 2.978155] snd-usb-audio 3-3.2:1.4: interface 4 successful
[ 2.978157] snd-usb-audio 3-3.2:1.4: create_autodetect_quirks successful
[ 2.978158] snd-usb-audio 3-3.2:1.1: quirk return code: 0
[ 2.978159] snd-usb-audio 3-3.2:1.1: probe step 2
[ 2.978334] snd-usb-audio 3-3.2:1.1: probe failed
[ 2.978439] snd-usb-audio: probe of 3-3.2:1.1 failed with error -5
[ 2.981241] systemd-udevd[510]: error opening
ATTR{/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/sound/
card3/controlC3/../uevent} for writing: No such file or directory
[ 2.981342] systemd-udevd[511]: Failed to apply ACL on
/dev/snd/pcmC3D0p: No such file or directory
[ 2.981361] systemd-udevd[510]: Failed to apply ACL on
/dev/snd/controlC3: No such file or directory
[ 2.981420] systemd-udevd[547]: Failed to apply ACL on
/dev/snd/midiC3D0: No such file or directory
[ 2.981560] systemd-udevd[546]: Failed to apply ACL on
/dev/snd/pcmC3D0c: No such file or directory
thanks for looking into this,
Cyrus
On 11/05/2014 01:17 PM, Clemens Ladisch wrote:
> Cyrus Harmon wrote:
>> [ 2.964094] snd-usb-audio 3-3.2:1.0: checking PCM interface
>> [ 2.964104] snd-usb-audio: probe of 3-3.2:1.0 failed with error -5
>> [ 2.966339] snd-usb-audio 3-3.2:1.1: checking PCM interface
>> [ 2.966341] snd-usb-audio 3-3.2:1.1: altsets found
>> [ 2.966342] snd-usb-audio 3-3.2:1.1: endpoint found
>> [ 2.966343] snd-usb-audio 3-3.2:1.1: iso found
>> [ 2.966344] snd-usb-audio 3-3.2:1.1: descriptors found
>> [ 2.968544] usb 3-3.2:1.0: checking PCM interface
>> [ 2.968546] usb 3-3.2:1.2: checking PCM interface
>> [ 2.968547] usb 3-3.2:1.2: altsets found
>> [ 2.968547] usb 3-3.2:1.2: endpoint found
>> [ 2.968548] usb 3-3.2:1.2: iso found
>> [ 2.968549] usb 3-3.2:1.2: descriptors found
>> [ 2.970657] usb 3-3.2:1.3: checking PCM interface
>> [ 2.970666] usb 3-3.2:1.4: checking PCM interface
>> [ 2.970930] snd-usb-audio: probe of 3-3.2:1.1 failed with error -5
> Strange; in theory, this cannot happen.
>
> Please add this patch and try again.
>
>
> Regards,
> Clemens
>
>
> --- a/sound/usb/card.c
> +++ b/sound/usb/card.c
> @@ -536,7 +536,9 @@ snd_usb_audio_probe(struct usb_device *dev,
> err = 1; /* continue */
> if (quirk && quirk->ifnum != QUIRK_NO_INTERFACE) {
> /* need some special handlings */
> - if ((err = snd_usb_create_quirk(chip, intf, &usb_audio_driver, quirk)) < 0)
> + err = snd_usb_create_quirk(chip, intf, &usb_audio_driver, quirk);
> + dev_info(&intf->dev, "quirk return code: %d\n", err);
> + if (err < 0)
> goto __error;
> }
>
> @@ -547,11 +549,13 @@ snd_usb_audio_probe(struct usb_device *dev,
> goto __error;
> }
> }
> + dev_info(&intf->dev, "probe step 2\n");
>
> /* we are allowed to call snd_card_register() many times */
> if (snd_card_register(chip->card) < 0) {
> goto __error;
> }
> + dev_info(&intf->dev, "probe step 3\n");
>
> usb_chip[chip->index] = chip;
> chip->num_interfaces++;
> @@ -560,6 +564,7 @@ snd_usb_audio_probe(struct usb_device *dev,
> return chip;
>
> __error:
> + dev_info(&intf->dev, "probe failed\n");
> if (chip) {
> if (!chip->num_interfaces)
> snd_card_free(chip->card);
> --- a/sound/usb/quirks.c
> +++ b/sound/usb/quirks.c
> @@ -367,6 +367,7 @@ static int create_autodetect_quirks(struct snd_usb_audio *chip,
> err = create_autodetect_quirk(chip, iface, driver);
> if (err < 0)
> return err;
> + dev_info(&iface->dev, "first interface successful\n");
>
> /*
> * ALSA PCM playback/capture devices cannot be registered in two steps,
> @@ -385,9 +386,13 @@ static int create_autodetect_quirks(struct snd_usb_audio *chip,
>
> err = create_autodetect_quirk(chip, iface, driver);
> if (err >= 0)
> + {
> usb_driver_claim_interface(driver, iface, (void *)-1L);
> + dev_info(&iface->dev, "interface %d successful\n", ifnum);
> + }
> }
>
> + dev_info(&iface->dev, "create_autodetect_quirks successful\n");
> return 0;
> }
>
next prev parent reply other threads:[~2014-11-06 5:47 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-09 18:12 [PATCH] add Steinberg UR44 USB Audio Interface support to quirks-table Cyrus Harmon
2014-03-10 9:42 ` Takashi Iwai
2014-03-10 12:07 ` Clemens Ladisch
2014-03-10 15:26 ` Cyrus Harmon
2014-03-10 15:30 ` Takashi Iwai
2014-03-10 15:40 ` Clemens Ladisch
2014-03-11 6:33 ` Cyrus Harmon
2014-03-11 8:31 ` Clemens Ladisch
2014-03-11 9:30 ` Cyrus Harmon
2014-03-17 16:29 ` Cyrus Harmon
2014-11-04 0:36 ` Cyrus Harmon
2014-11-04 6:28 ` Takashi Iwai
2014-11-04 8:55 ` Cyrus Harmon
2014-11-05 23:14 ` Takashi Iwai
2014-11-06 4:39 ` Cyrus Harmon
2014-11-06 5:28 ` Vlad Catoi
2014-11-06 5:32 ` Cyrus Harmon
2014-11-06 13:46 ` Vlad Catoi
2014-11-04 8:59 ` Clemens Ladisch
2014-11-04 9:00 ` Clemens Ladisch
2014-11-05 18:16 ` Cyrus Harmon
2014-11-05 21:17 ` Clemens Ladisch
2014-11-06 5:47 ` Cyrus Harmon [this message]
2014-11-15 13:00 ` Clemens Ladisch
2015-02-03 7:14 ` Cyrus Harmon
2014-11-06 16:05 ` Cyrus Harmon
2014-11-06 16:49 ` Takashi Iwai
2014-11-06 16:54 ` Cyrus Harmon
2014-11-08 4:24 ` Vlad Catoi
2014-11-08 4:25 ` Vlad Catoi
2015-02-03 6:56 ` Cyrus Harmon
2015-02-03 9:02 ` Takashi Iwai
2014-11-06 17:32 ` Clemens Ladisch
-- strict thread matches above, loose matches on Subject: below --
2014-03-10 15:37 Cyrus Harmon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545B0B54.5080609@bobobeach.com \
--to=cyrus@bobobeach.com \
--cc=alsa-devel@alsa-project.org \
--cc=clemens@ladisch.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox