From: Alnie <alnieb@yahoo.com>
To: alsa-devel@alsa-project.org
Subject: Issues w/ Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG
Date: Sun, 15 Feb 2015 13:33:55 -0800 [thread overview]
Message-ID: <54E110C3.70509@yahoo.com> (raw)
In-Reply-To: <54E10F0C.7070802@yahoo.com>
I am having a problem getting this card working in Mint 17.1 (64bit). I
have found reports from others around the net claiming to have this card
working (around 2010/2011 mostly). I also tried xubuntu with the same
results. On a fresh distro when I install the card, it is recognized but
isn't associated with any driver, if I install the 3.16 kernel or the
alsa-daily repo it becomes associated with a driver but I get the
following errors from dmesg...
[ 3.713183] snd_hda_intel 0000:06:00.0: Probing card using HDA DKMS, version 0.201502151246~ubuntu14.04.1
[ 3.720010] snd_hda_intel 0000:06:00.0: CORB reset timeout#1, CORBRP = 0
[ 4.744035] snd_hda_intel 0000:06:00.0: Codec #1 probe error; disabling it...
[ 4.748009] snd_hda_intel 0000:06:00.0: CORB reset timeout#1, CORBRP = 0
[ 9.772075] snd_hda_intel 0000:06:00.0: no AFG or MFG node found
[ 9.772100] snd_hda_intel 0000:06:00.0: no codecs initialized
and here is my lspci output...
05:00.0 PCI bridge: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG PCI to PCIe Bridge (prog-if 00 [Normal decode])
Physical Slot: 3
Flags: bus master, fast devsel, latency 0
Bus: primary=05, secondary=06, subordinate=0c, sec-latency=36
Memory behind bridge: f4300000-f43fffff
Capabilities: [50] Power Management version 3
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
Capabilities: [80] Subsystem: Creative Labs Device 0040
Capabilities: [90] Express PCI-Express to PCI/PCI-X Bridge, MSI 00
Capabilities: [100] Advanced Error Reporting
06:00.0 Audio device: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG
Subsystem: Creative Labs SB1040
Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 19
Memory at f4300000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [dc] Power Management version 3
Kernel driver in use: snd_hda_intel
thank you for any advice & feedback on this.
next parent reply other threads:[~2015-02-15 21:33 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <54E10F0C.7070802@yahoo.com>
2015-02-15 21:33 ` Alnie [this message]
2015-02-16 16:05 ` Issues w/ Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG Takashi Iwai
2015-02-16 19:03 ` Alnie
2015-02-16 19:52 ` Takashi Iwai
2015-02-22 20:47 ` Alnie
2015-02-22 20:55 ` Alnie
2015-02-24 15:37 ` Takashi Iwai
2015-02-24 18:14 ` Alnie
2015-02-24 19:52 ` Takashi Iwai
2015-02-24 20:10 ` Alnie
2015-02-24 20:39 ` Takashi Iwai
2015-02-24 21:30 ` Alnie
2015-02-25 4:37 ` Alnie
2015-02-25 6:28 ` Takashi Iwai
2015-02-25 6:51 ` Alnie
2015-02-25 7:06 ` Takashi Iwai
2015-02-25 7:32 ` Alnie
2015-02-25 7:48 ` Takashi Iwai
2015-02-25 8:01 ` Alnie
[not found] ` <54ED7FED.9080600@yahoo.com>
2015-02-25 8:06 ` Takashi Iwai
2015-02-25 8:21 ` Alnie
2015-02-25 8:23 ` Takashi Iwai
2015-02-25 8:30 ` Alnie
2015-03-03 3:37 Alnie
2015-03-03 6:10 ` Takashi Iwai
2015-03-03 7:22 ` Alnie
2015-03-03 7:48 ` Takashi Iwai
2015-03-03 9:21 ` Alnie
2015-03-03 21:51 ` Alnie
2015-03-03 21:58 ` Alnie
2015-03-03 22:07 ` Takashi Iwai
2015-03-04 2:12 ` Alnie
2015-03-04 8:00 ` Takashi Iwai
2015-03-04 9:01 ` Alnie
2015-03-04 9:35 ` Takashi Iwai
2015-03-06 22:38 ` Alnie
2015-03-06 22:50 ` Alnie
2015-03-06 23:31 ` Alnie
2015-03-07 7:56 ` Takashi Iwai
2015-03-07 16:28 ` Alnie
2015-03-07 16:32 ` Takashi Iwai
2015-03-07 18:06 ` Alnie
2015-03-09 15:22 ` Alnie
2015-03-09 16:00 ` Takashi Iwai
2015-03-12 3:59 ` Alnie
2015-03-12 6:19 ` Takashi Iwai
2015-03-13 2:41 ` Alnie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54E110C3.70509@yahoo.com \
--to=alnieb@yahoo.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox