public inbox for alsa-devel@alsa-project.org
 help / color / mirror / Atom feed
From: Alnie <alnieb@yahoo.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: Issues w/ Creative Labs [SB X-Fi Xtreme Audio]	CA0110-IBG
Date: Mon, 16 Feb 2015 11:03:50 -0800	[thread overview]
Message-ID: <54E23F16.5090205@yahoo.com> (raw)
In-Reply-To: <s5h1tlp96zn.wl-tiwai@suse.de>

By default the version of Mint I'm using has 3.13.0-37 loaded. I just 
tried some previous versions of the kernel (3.13.0-27, 3.13.0-32 & 
3.13.0-36) and the same issues came up, although with -36, there was no 
output in dmesg in regards to probing DKMS, and no driver was 
associated. I also tried each kernel with the daily drivers removed as 
well, and the card was recognized but non functional (no driver 
associated). Also, in case hardware malfunction is considered, this card 
seems to work fine in windows for me. Thank you.

On 02/16/2015 08:05 AM, Takashi Iwai wrote:
> At Sun, 15 Feb 2015 13:33:55 -0800,
> Alnie wrote:
>> I am having a problem getting this card working in Mint 17.1 (64bit). I
>> have found reports from others around the net claiming to have this card
>> working (around 2010/2011 mostly). I also tried xubuntu with the same
>> results. On a fresh distro when I install the card, it is recognized but
>> isn't associated with any driver, if I install the 3.16 kernel or the
>> alsa-daily repo it becomes associated with a driver but I get the
>> following errors from dmesg...
>>
>> [    3.713183] snd_hda_intel 0000:06:00.0: Probing card using HDA DKMS, version 0.201502151246~ubuntu14.04.1
>> [    3.720010] snd_hda_intel 0000:06:00.0: CORB reset timeout#1, CORBRP = 0
>> [    4.744035] snd_hda_intel 0000:06:00.0: Codec #1 probe error; disabling it...
>> [    4.748009] snd_hda_intel 0000:06:00.0: CORB reset timeout#1, CORBRP = 0
>> [    9.772075] snd_hda_intel 0000:06:00.0: no AFG or MFG node found
>> [    9.772100] snd_hda_intel 0000:06:00.0: no codecs initialized
>>
>> and here is my lspci output...
>>
>> 05:00.0 PCI bridge: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG PCI to PCIe Bridge (prog-if 00 [Normal decode])
>>       Physical Slot: 3
>>       Flags: bus master, fast devsel, latency 0
>>       Bus: primary=05, secondary=06, subordinate=0c, sec-latency=36
>>       Memory behind bridge: f4300000-f43fffff
>>       Capabilities: [50] Power Management version 3
>>       Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
>>       Capabilities: [80] Subsystem: Creative Labs Device 0040
>>       Capabilities: [90] Express PCI-Express to PCI/PCI-X Bridge, MSI 00
>>       Capabilities: [100] Advanced Error Reporting
>>
>> 06:00.0 Audio device: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG
>>       Subsystem: Creative Labs SB1040
>>       Flags: bus master, fast Back2Back, medium devsel, latency 32, IRQ 19
>>       Memory at f4300000 (32-bit, non-prefetchable) [size=16K]
>>       Capabilities: [dc] Power Management version 3
>>       Kernel driver in use: snd_hda_intel
>>
>> thank you for any advice & feedback on this.
> Could you try 3.13 kernel or older once?  I have also another bug
> report indicating a similar problem (no codec found, but with a
> totally different system), and the reporter mentioned that the
> regression happened between 3.13 and 3.14.
>
>
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2015-02-16 19:03 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <54E10F0C.7070802@yahoo.com>
2015-02-15 21:33 ` Issues w/ Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG Alnie
2015-02-16 16:05   ` Takashi Iwai
2015-02-16 19:03     ` Alnie [this message]
2015-02-16 19:52       ` Takashi Iwai
2015-02-22 20:47         ` Alnie
2015-02-22 20:55           ` Alnie
2015-02-24 15:37             ` Takashi Iwai
2015-02-24 18:14               ` Alnie
2015-02-24 19:52                 ` Takashi Iwai
2015-02-24 20:10                   ` Alnie
2015-02-24 20:39                     ` Takashi Iwai
2015-02-24 21:30                       ` Alnie
2015-02-25  4:37                         ` Alnie
2015-02-25  6:28                           ` Takashi Iwai
2015-02-25  6:51                             ` Alnie
2015-02-25  7:06                               ` Takashi Iwai
2015-02-25  7:32                                 ` Alnie
2015-02-25  7:48                                   ` Takashi Iwai
2015-02-25  8:01                                     ` Alnie
     [not found]                                     ` <54ED7FED.9080600@yahoo.com>
2015-02-25  8:06                                       ` Takashi Iwai
2015-02-25  8:21                                         ` Alnie
2015-02-25  8:23                                           ` Takashi Iwai
2015-02-25  8:30                                             ` Alnie
2015-03-03  3:37 Alnie
2015-03-03  6:10 ` Takashi Iwai
2015-03-03  7:22   ` Alnie
2015-03-03  7:48     ` Takashi Iwai
2015-03-03  9:21       ` Alnie
2015-03-03 21:51         ` Alnie
2015-03-03 21:58           ` Alnie
2015-03-03 22:07           ` Takashi Iwai
2015-03-04  2:12             ` Alnie
2015-03-04  8:00               ` Takashi Iwai
2015-03-04  9:01                 ` Alnie
2015-03-04  9:35                   ` Takashi Iwai
2015-03-06 22:38                     ` Alnie
2015-03-06 22:50                       ` Alnie
2015-03-06 23:31                     ` Alnie
2015-03-07  7:56                       ` Takashi Iwai
2015-03-07 16:28                         ` Alnie
2015-03-07 16:32                           ` Takashi Iwai
2015-03-07 18:06                             ` Alnie
2015-03-09 15:22                               ` Alnie
2015-03-09 16:00                                 ` Takashi Iwai
2015-03-12  3:59                                   ` Alnie
2015-03-12  6:19                                     ` Takashi Iwai
2015-03-13  2:41                                       ` Alnie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54E23F16.5090205@yahoo.com \
    --to=alnieb@yahoo.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox