public inbox for alsa-devel@alsa-project.org
 help / color / mirror / Atom feed
From: David Henningsson <david.henningsson@canonical.com>
To: Takashi Iwai <tiwai@suse.de>, alsa-devel@alsa-project.org
Subject: Re: [PATCH 0/4] More aggressive PM for HD-audio
Date: Wed, 18 Mar 2015 20:34:34 +0100	[thread overview]
Message-ID: <5509D34A.9070006@canonical.com> (raw)
In-Reply-To: <1426668658-15911-1-git-send-email-tiwai@suse.de>



On 2015-03-18 09:50, Takashi Iwai wrote:
> Hi,
>
> here is a patchset for supporting more aggressive PM for HD-audio.
> This allows to change the power state of each widget more dynamically
> with jack and stream states.  It's activated only when the codec
> driver (or via sysfs or f/w patch) sets codec->power_mgmt flag.

Cool. Could you elaborate on how the power_mgmt flag interacts with the 
power_save module parameter (which, on Ubuntu, is set dynamically based 
on AC power or not)? I e, does it make sense to test this both with and 
without power_save enabled?

Also I assume power_save_controller should not matter, right?

>
> In theory, this should work for the recent Realtek codecs, but
> currently I have no machine for test.
>
> David, could you or your team check whether this works for ALC282 or
> such?  Just add like:
>
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -5415,6 +5415,7 @@ static int patch_alc269(struct hda_codec *codec)
>   
>   	spec = codec->spec;
>   	spec->gen.shared_mic_vref_pin = 0x18;
> +	codec->power_mgmt = 1;
>   
>   	snd_hda_pick_fixup(codec, alc269_fixup_models,
>   		       alc269_fixup_tbl, alc269_fixups);
>
>
> The patchset is for for-next branch of sound git tree, but they might
> be applicable to 4.0-rc (or even older), too.  The current patches are
> found in topic/hda-power branch.
>
>
> thanks,
>
> Takashi
>
> ===
>
> Takashi Iwai (4):
>    ALSA: hda - Simplify PCM setup overrides
>    ALSA: hda - Support advanced power state controls
>    ALSA: hda - Use the new power control for VIA codecs
>    ALSA: hda - Adjust power of beep widget and outputs
>
>   sound/pci/hda/hda_beep.c       |  29 +-
>   sound/pci/hda/hda_beep.h       |   1 +
>   sound/pci/hda/hda_codec.c      |   4 +
>   sound/pci/hda/hda_codec.h      |   2 +
>   sound/pci/hda/hda_generic.c    | 480 ++++++++++++++++++++++++------
>   sound/pci/hda/hda_generic.h    |   5 +-
>   sound/pci/hda/patch_realtek.c  |  41 ---
>   sound/pci/hda/patch_sigmatel.c |   5 +
>   sound/pci/hda/patch_via.c      | 662 +----------------------------------------
>   9 files changed, 427 insertions(+), 802 deletions(-)
>

  parent reply	other threads:[~2015-03-18 19:34 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-18  8:50 [PATCH 0/4] More aggressive PM for HD-audio Takashi Iwai
2015-03-18  8:50 ` [PATCH 1/4] ALSA: hda - Simplify PCM setup overrides Takashi Iwai
2015-03-18  8:50 ` [PATCH 2/4] ALSA: hda - Support advanced power state controls Takashi Iwai
2015-03-18  8:50 ` [PATCH 3/4] ALSA: hda - Use the new power control for VIA codecs Takashi Iwai
2015-03-18  8:50 ` [PATCH 4/4] ALSA: hda - Adjust power of beep widget and outputs Takashi Iwai
2015-03-18 19:34 ` David Henningsson [this message]
2015-03-18 20:02   ` [PATCH 0/4] More aggressive PM for HD-audio Takashi Iwai
2015-03-20 16:20 ` David Henningsson
2015-03-20 16:28   ` Takashi Iwai
2015-03-20 17:18     ` Takashi Iwai
2015-03-20 17:33       ` Takashi Iwai
2015-03-21  6:38   ` Hui Wang
     [not found]     ` <5513FA8B.402@canonical.com>
2015-03-26 13:10       ` Takashi Iwai
2015-03-26 13:52         ` Takashi Iwai
2015-03-27  0:11           ` Hui Wang
2015-03-30  6:53             ` hwang4
2015-04-04 10:31               ` Takashi Iwai
2015-04-09  6:54               ` hwang4
2015-04-09  6:56                 ` Takashi Iwai
2015-04-09  6:59                   ` David Henningsson
2015-04-09  8:35                     ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5509D34A.9070006@canonical.com \
    --to=david.henningsson@canonical.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox