From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Subject: Re: recording problem in beagleboard-mcbsp Date: Thu, 9 Apr 2015 17:07:45 +0300 Message-ID: <552687B1.5060108@ti.com> References: <551C3D19.2050200@ti.com> <5523A1F3.2000701@ti.com> <5524FA51.9060606@ti.com> <55266B38.6030503@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable Return-path: Received: from comal.ext.ti.com (comal.ext.ti.com [198.47.26.152]) by alsa0.perex.cz (Postfix) with ESMTP id D9C0F26052E for ; Thu, 9 Apr 2015 16:07:50 +0200 (CEST) In-Reply-To: <55266B38.6030503@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: noman pouigt Cc: "alsa-devel@alsa-project.org" , "broonie@kernel.org" List-Id: alsa-devel@alsa-project.org On 04/09/2015 03:06 PM, Peter Ujfalusi wrote: > Hrm, McBSP1 is kind of problematic port since it has 6pin config by defau= lt. > It might worth a try to do something like: > http://lists.infradead.org/pipermail/linux-arm-kernel/2012-August/113058.= html > has removed. > Or to switch to use McBSP3. > = > But for some reason now I can not get the recording working via McBSP1 ei= ther. > I remember that it worked not that long time ago... One thing I would also try: use the codec as master and connect the FS to McBSP1 FSX _and_ FSR. Do the same for the bclk (connect it to BCLKX _and_ BCLKR of McBSP1) Configure the pin mux for these pins also. -- = P=E9ter