From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000306]: compiles, but no sound comes out
Date: Fri, 7 Jan 2005 00:30:05 +0100 [thread overview]
Message-ID: <554fcadd0c90dc69cef810674de3ae5c@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=306>
======================================================================
Reported By: Quietti
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 306
Category: PPC - powermac
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian
Kernel Version: self-compiled 2.6.6 vanilla.
======================================================================
Date Submitted: 05-25-2004 20:35 CEST
Last Modified: 01-07-2005 00:30 CET
======================================================================
Summary: compiles, but no sound comes out
Description:
This is a plain vanilla kernel 2.6.6, which uses ALSA 1.0.4.
The kernel compiles fine, the snd_powermac module loads without any error,
but no sound comes up.
Running alsamixer gives me a mixer screen where none of the sliders can be
moved.
======================================================================
----------------------------------------------------------------------
Quietti - 01-07-05 00:19
----------------------------------------------------------------------
You asked me a while ago to confirm whether certain tests worked. I pasted
them and got no response. Since you are still assigned to this issue, I
would like to know what is your situation. Thanks.
----------------------------------------------------------------------
Quietti - 01-07-05 00:30
----------------------------------------------------------------------
'hwinfo' mentions the following about the sound hardware of this vintage
iMac:
11: None 00.0: 0401 Multimedia audio controller
[Created at prom.409]
Unique ID: AT0p.4TqZ9X2iLH0
Parent ID: LxCh.xWNNVcdS2SF
Hardware Class: sound
Model: "Apple Integrated Sound (burgundy)"
Vendor: int 0x0401 "Apple"
Device: int 0x0012 "Integrated Sound (burgundy)"
PROM id: pci@80000000/mac-io@10/davbus@14000/sound
IRQ: 17 (1 event)
Driver Info https://bugtrack.alsa-project.org/alsa-bug/view.php?id=0:
Driver Status: dmasound is not active
Driver Activation Cmd: "modprobe dmasound"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=7
(Unclassified device)
07: PCI 10.0: ff00 Unclassified device
[Created at pci.244]
Unique ID: LxCh.xWNNVcdS2SF
SysFS ID: /devices/pci0000:00/0000:00:10.0
SysFS BusID: 0000:00:10.0
Hardware Class: unknown
Model: "Apple Paddington Mac I/O"
Vendor: pci 0x106b "Apple Computer Inc."
Device: pci 0x0017 "Paddington Mac I/O"
Driver: "macio"
PROM id: pci@80000000/mac-io@10
Memory Range: 0x80800000-0x8087ffff (rw,non-prefetchable)
Config Status: cfg=new, avail=yes, need=no, active=unknown
Issue History
Date Modified Username Field Change
======================================================================
05-25-04 20:35 Quietti New Issue
05-25-04 20:35 Quietti File Added: asound.state
05-25-04 20:35 Quietti Distribution => Debian
05-25-04 20:35 Quietti Kernel Version => self-compiled 2.6.6
vanilla.
05-25-04 20:38 Quietti Issue Monitored: Quietti
05-28-04 21:18 tiwai Note Added: 0001274
05-28-04 21:37 Quietti Note Added: 0001275
07-25-04 20:16 Quietti Note Added: 0001473
09-08-04 06:32 Quietti Note Added: 0001726
10-20-04 00:38 Quietti Note Added: 0002209
01-06-05 18:14 Quietti Note Added: 0003093
01-06-05 18:27 rlrevell Note Added: 0003094
01-06-05 19:43 Quietti Note Added: 0003095
01-07-05 00:00 Quietti Note Added: 0003096
01-07-05 00:19 Quietti Note Added: 0003097
01-07-05 00:30 Quietti Note Added: 0003098
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
next reply other threads:[~2005-01-06 23:30 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-06 23:30 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-09-24 23:07 [ALSA - driver 0000306]: compiles, but no sound comes out bugtrack
2005-09-24 23:03 bugtrack
2005-09-22 8:23 bugtrack
2005-09-21 17:34 bugtrack
2005-09-21 11:02 bugtrack
2005-09-21 8:52 bugtrack
2005-09-21 2:00 bugtrack
2005-09-21 1:59 bugtrack
2005-09-20 10:23 bugtrack
2005-09-17 18:21 bugtrack
2005-09-17 18:13 bugtrack
2005-08-31 9:44 bugtrack
2005-08-11 11:09 bugtrack
2005-08-08 17:42 bugtrack
2005-08-08 12:53 bugtrack
2005-08-07 18:27 bugtrack
2005-08-07 9:44 bugtrack
2005-08-07 9:36 bugtrack
2005-08-07 8:46 bugtrack
2005-08-07 8:31 bugtrack
2005-08-07 8:03 bugtrack
2005-08-06 21:54 bugtrack
2005-08-06 19:17 bugtrack
2005-08-06 18:53 bugtrack
2005-08-06 18:32 bugtrack
2005-08-06 18:31 bugtrack
2005-08-06 18:24 bugtrack
2005-04-02 11:33 bugtrack
2005-02-04 12:04 bugtrack
2005-02-04 8:22 bugtrack
2005-01-13 23:53 bugtrack
2005-01-06 23:00 bugtrack
2005-01-06 18:43 bugtrack
2005-01-06 17:27 bugtrack
2005-01-06 17:14 bugtrack
2004-10-19 22:38 bugtrack
2004-09-08 4:32 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=554fcadd0c90dc69cef810674de3ae5c@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox