From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
dmurphy@ti.com
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH 00/22] ASoC: tas2552: Fixes, cleanups and improvements
Date: Thu, 4 Jun 2015 15:34:11 +0300 [thread overview]
Message-ID: <557045C3.2090407@ti.com> (raw)
In-Reply-To: <1433420571-5421-1-git-send-email-peter.ujfalusi@ti.com>
Hi,
On 06/04/2015 03:22 PM, Peter Ujfalusi wrote:
> Hi,
>
> I have used the TAS2552-EVM to verify that my setup is in working condition for
> a work on other audio product.
> During the bringup of the EVM I have faced some issues and limitation with the
> driver. The result is this series against the tas2552 driver.
Something messed up my branch it seams while fixing couple of checkpatch
errors... Aargh. I will resend as soon as I figure out what happened.
Sorry,
Péter
> Notable changes:
> - Fixes for kernel crashes
> - The enable-gpio was not optional as it was documented in the DTS
> - Register bit definitions were not correct in several places
> - Adding recommended startup/stop sequence
> - Handling of sample formats the driver claims to support
> - PLL configuration fixes and reference clock selection
> - TDM support
> - Gain control fix and control to select DIN source
>
> Regards,
> Peter
> ---
> Peter Ujfalusi (22):
> ASoC: tas2552: Make the enable-gpio really optional
> ASoC: tas2552: Fix kernel crash when the codec is loaded but not part
> of a card
> ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry
> ASoC: tas2552: Correct PDM configuration register bit definitions
> ASoC: tas2552: Correct CFG1 register bit definitions
> ASoC: tas2552: Simplify the tas2552_mute function
> ASoC: tas2552: Simplify and reverse the functionality of
> tas2552_sw_shutdown
> ASoC: tas2552: Rename mclk parameter to pll_clkin to match with the
> datasheet
> DT/sound: bindings header file for tas2552 codec
> ASoC: tas2552: Add support for pll and pdm source clock selection
> ASoC: tas2552: Correct dai format support
> ASoC: tas2552: Correct and clean up data format and BCLK/WCLK
> direction
> ASoC: tas2552: Add TDM support
> ASoC: tas2552: Clean up the Digital - Analog DAPM route definition
> ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN)
> ASoC: tas2552: Implement startup/stop sequence as per TRM
> ASoC: tas2552: Add support for word length configuration
> ASoC: tas2552: Configure the WCLK frequency based on the stream
> ASoC: tas2552: Add control for selecting DIN source
> ASoC: tas2552: Correct Output Data register usage
> ASoC: tas2552: Correct Boost Auto-Pass Through Control register usage
> ASoC: tas2552: Code, define alignment changes for uniformity
>
> include/dt-bindings/sound/tas2552.h | 18 ++
> sound/soc/codecs/tas2552.c | 435 +++++++++++++++++++++++++++---------
> sound/soc/codecs/tas2552.h | 149 ++++++------
> 3 files changed, 431 insertions(+), 171 deletions(-)
> create mode 100644 include/dt-bindings/sound/tas2552.h
>
prev parent reply other threads:[~2015-06-04 12:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-04 12:22 [PATCH 00/22] ASoC: tas2552: Fixes, cleanups and improvements Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 01/22] ASoC: tas2552: Make the enable-gpio really optional Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 02/22] ASoC: tas2552: Fix kernel crash when the codec is loaded but not part of a card Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 03/22] ASoC: tas2552: Fix kernel crash caused by wrong kcontrol entry Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 04/22] ASoC: tas2552: Correct PDM configuration register bit definitions Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 05/22] ASoC: tas2552: Correct CFG1 " Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 06/22] ASoC: tas2552: Simplify the tas2552_mute function Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 07/22] ASoC: tas2552: Simplify and reverse the functionality of tas2552_sw_shutdown Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 08/22] ASoC: tas2552: Rename mclk parameter to pll_clkin to match with the datasheet Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 09/22] DT/sound: bindings header file for tas2552 codec Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 10/22] ASoC: tas2552: Add support for pll and pdm source clock selection Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 11/22] ASoC: tas2552: Correct dai format support Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 12/22] ASoC: tas2552: Correct and clean up data format and BCLK/WCLK direction Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 13/22] ASoC: tas2552: Add TDM support Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 14/22] ASoC: tas2552: Clean up the Digital - Analog DAPM route definition Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 15/22] ASoC: tas2552: Correct the Speaker Driver Playback Volume (PGA_GAIN) Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 16/22] ASoC: tas2552: Implement startup/stop sequence as per TRM Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 17/22] ASoC: tas2552: Add support for word length configuration Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 18/22] ASoC: tas2552: Configure the WCLK frequency based on the stream Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 19/22] ASoC: tas2552: Add control for selecting DIN source Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 19/23] ASoC: tas2552: Correct the PLL configuration Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 20/23] ASoC: tas2552: Add control for selecting DIN source Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 20/22] ASoC: tas2552: Correct Output Data register usage Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 21/22] ASoC: tas2552: Correct Boost Auto-Pass Through Control " Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 21/23] ASoC: tas2552: Correct Output Data " Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 22/22] ASoC: tas2552: Code, define alignment changes for uniformity Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 22/23] ASoC: tas2552: Correct Boost Auto-Pass Through Control register usage Peter Ujfalusi
2015-06-04 12:22 ` [PATCH 23/23] ASoC: tas2552: Code, define alignment changes for uniformity Peter Ujfalusi
2015-06-04 12:34 ` Peter Ujfalusi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=557045C3.2090407@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dmurphy@ti.com \
--cc=lgirdwood@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox