Re: Intel Baytrail Linux Audio

[Tyler Yeomans <tyeo098@gmail.com>]

Vinod,

I am using the ssp0 firmware from:
https://git.kernel.org/cgit/linux/kernel/git/vkoul/firmware.git/tree/intel?h=byt.

Thanks-

Tyler

On 07/06/2015 11:19 PM, Vinod Koul wrote:
> On Mon, Jul 06, 2015 at 10:29:34AM -0400, Tyler Yeomans wrote:
>> Hello all,
>>
>> Apparently I'm in the same boat as Nicolas is.
>> I've attached my dmesg output.
>> Everything seems to be generating but I am not able to get any sound
>> output.
>> Between the 37 second mark and the 617 second mark I had routed the
>> FE to BE via the commands:
>>
>> amixer -c0 sset 'codec_out0 mix 0 pcm0_in' on
>> amixer -c0 sset 'media0_out mix 0 media1_in' on
> ok that seems fine
>> Although it appears that did not work:
>> [  719.834922] intel_sst_acpi 80860F28:00: Wait timed-out
>> condition:0x0, msg_id:0x1 fw_state 0x3
>> [  719.834932] intel_sst_acpi 80860F28:00: fw returned err -16
> I don't think so, since you were able to start the card, that part worked :)
>
> The error is coming from FW here and seems unresponsive.
>
> Which firmware are you using?
>
> Second suspicion is for interrupts, if they are not mapped well we might see
> these.
>
> Jarkko I remember that some board have to be configured properly for
> interrupts, can you explaian the subtleties involved here
>
> --
> ~Vinod