From mboxrd@z Thu Jan 1 00:00:00 1970 From: Luka Karinja Subject: Re: Intel SST on a Bay Trail tablet Date: Mon, 24 Aug 2015 17:05:41 +0200 Message-ID: <55DB32C5.8050906@bazdara.com> References: <20150824132904.GA665@acervm.homenet.telecomitalia.it> <20150824142625.GM13546@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: Received: from server.bazdara.com (server.bazdara.com [84.255.206.229]) by alsa0.perex.cz (Postfix) with ESMTP id AEDBD2608ED for ; Mon, 24 Aug 2015 17:05:42 +0200 (CEST) In-Reply-To: <20150824142625.GM13546@localhost> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Vinod Koul , Michele Curti Cc: alsa-devel@alsa-project.org, ao2@ao2.it, jarkko.nikula@linux.intel.com List-Id: alsa-devel@alsa-project.org >> Damn, completely missed.. >> >> Hi Vinod, >> if it's possible, could you please generate a fw_sst_0f28_ssp1.bin >> also, so I can test my driver (mine was for the Asus X205TA laptop, >> where the codec is on SSP1 port)? > Are you sure you ahve SSP1 port enabled. I have not seen anyone using that > one. Jarkko do you know about this? > > I will ask firmware folks for generation (i don't do that) and get back > Hi Vinod The Asus T100TAF seems to be using the SSP1 port too with a RT5642,. I have tested SSP2 and SSP0 firmwares, only getting heat and clicks, errors reported by Michele are the same on my device. In the DSDT there are only references to SSP1.