Re: fsl_ssi.c: Roberto's problem: ssi hangs after some number of samples

[Roberto Fichera <kernel@tekno-soft.it>]

On 11/04/2015 07:11 PM, Nicolin Chen wrote:
> On Wed, Nov 04, 2015 at 06:52:12PM +0100, Roberto Fichera wrote:
>
>>> I notice your DMA buffer length is very short, which would require
>>> very frequency interrupts to service, right?   Can you increase your
>>> DMA buffer length by increasing the period size?  Maybe that would
>>> help reduce the likelyhood of a failure.  
>> Not sure if this can help! SSI TDM is set to 32 slots but only 2 are masked. So every frame only
>> 2 slots are pushed/pulled from the FIFOs. maxburst is set to pull a block of 8 elements from the
>> FIFOs, DMA cyclic call it period. So the full DMA buffer is filled in buffer size / period DMA iterations.
> A smaller period size may course DMA buffer over/underrun -- ALSA
> over/underrun even though it seems that you didn't report any.
>
> And apparently SDMA would get more interrupt/callbacks. I would
> suggest a larger period size and buffer size although I cannot
> tie your problem with the size. But you may try.

Do you mean something like 2KB buffer and a period of 64 or 128 frames?
SDMA is supposed to wait the FIFO capacity
to complete a period, right?