From: Keyon <yang.jie@linux.intel.com>
To: Vinod Koul <vinod.koul@intel.com>, alsa-devel@alsa-project.org
Cc: patches.audio@intel.com, liam.r.girdwood@linux.intel.com,
broonie@kernel.org, Liam Girdwood <lgirdwood@gmail.com>
Subject: Re: [PATCH 1/3] ASoC: Intel: Hsw: Move driver to use SND_SOC_BYTES_TLV
Date: Thu, 19 Nov 2015 11:22:08 +0800 [thread overview]
Message-ID: <564D4060.1070909@linux.intel.com> (raw)
In-Reply-To: <1447853952-6414-2-git-send-email-vinod.koul@intel.com>
+ Han who is the author of this part.
On 2015年11月18日 21:39, Vinod Koul wrote:
> Haswell driver was using SND_SOC_BYTES_EXT. Since we want to
> remove this, convert it to use SND_SOC_BYTES_TLV
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> Cc: Jie Yang <yang.jie@linux.intel.com>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
looks fine for me, but let's wait Han's confirmation about it.
thanks,
~Keyon
> ---
> sound/soc/intel/haswell/sst-haswell-pcm.c | 50 ++++++++++++++++++++++++-------
> 1 file changed, 40 insertions(+), 10 deletions(-)
>
> diff --git a/sound/soc/intel/haswell/sst-haswell-pcm.c b/sound/soc/intel/haswell/sst-haswell-pcm.c
> index 1aa819c7e09b..65594dff291a 100644
> --- a/sound/soc/intel/haswell/sst-haswell-pcm.c
> +++ b/sound/soc/intel/haswell/sst-haswell-pcm.c
> @@ -368,41 +368,71 @@ static int hsw_waves_switch_put(struct snd_kcontrol *kcontrol,
> }
>
> static int hsw_waves_param_get(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> + unsigned int __user *data, unsigned int size)
> {
> struct snd_soc_platform *platform = snd_soc_kcontrol_platform(kcontrol);
> struct hsw_priv_data *pdata = snd_soc_platform_get_drvdata(platform);
> struct sst_hsw *hsw = pdata->hsw;
> + u8 *buffer;
> + int ret;
> +
> + buffer = kzalloc(size, GFP_KERNEL);
> + if (!buffer)
> + return -ENOMEM;
>
> /* return a matching line from param buffer */
> - return sst_hsw_load_param_line(hsw, ucontrol->value.bytes.data);
> + ret = sst_hsw_load_param_line(hsw, buffer);
> + if (ret)
> + goto err;
> +
> + if (copy_to_user(data, buffer, size))
> + ret = -EFAULT;
> +
> +err:
> + kfree(buffer);
> + return ret;
> }
>
> static int hsw_waves_param_put(struct snd_kcontrol *kcontrol,
> - struct snd_ctl_elem_value *ucontrol)
> + const unsigned int __user *data, unsigned int size)
> {
> struct snd_soc_platform *platform = snd_soc_kcontrol_platform(kcontrol);
> struct hsw_priv_data *pdata = snd_soc_platform_get_drvdata(platform);
> struct sst_hsw *hsw = pdata->hsw;
> - int ret;
> + int ret = 0;
> enum sst_hsw_module_id id = SST_HSW_MODULE_WAVES;
> - int param_id = ucontrol->value.bytes.data[0];
> + int param_id;
> int param_size = WAVES_PARAM_COUNT;
> + u8 *buffer;
> +
> + buffer = kzalloc(size, GFP_KERNEL);
> + if (!buffer)
> + return -ENOMEM;
> +
> + if (copy_from_user(buffer, data, size)) {
> + ret = -EFAULT;
> + goto exit;
> + }
> +
> + param_id = *buffer;
>
> /* clear param buffer and reset buffer index */
> if (param_id == 0xFF) {
> sst_hsw_reset_param_buf(hsw);
> - return 0;
> + goto exit;
> }
>
> /* store params into buffer */
> - ret = sst_hsw_store_param_line(hsw, ucontrol->value.bytes.data);
> + ret = sst_hsw_store_param_line(hsw, buffer);
> if (ret < 0)
> - return ret;
> + goto exit;
>
> if (sst_hsw_is_module_active(hsw, id))
> ret = sst_hsw_module_set_param(hsw, id, 0, param_id,
> - param_size, ucontrol->value.bytes.data);
> + param_size, buffer);
> +
> +exit:
> + kfree(buffer);
> return ret;
> }
>
> @@ -431,7 +461,7 @@ static const struct snd_kcontrol_new hsw_volume_controls[] = {
> SOC_SINGLE_BOOL_EXT("Waves Switch", 0,
> hsw_waves_switch_get, hsw_waves_switch_put),
> /* set parameters to module waves */
> - SND_SOC_BYTES_EXT("Waves Set Param", WAVES_PARAM_COUNT,
> + SND_SOC_BYTES_TLV("Waves Set Param", WAVES_PARAM_COUNT,
> hsw_waves_param_get, hsw_waves_param_put),
> };
>
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2015-11-19 3:15 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-18 13:39 [PATCH 0/3] ASoC: remove SND_SOC_BYTES_EXT Vinod Koul
2015-11-18 13:39 ` [PATCH 1/3] ASoC: Intel: Hsw: Move driver to use SND_SOC_BYTES_TLV Vinod Koul
2015-11-19 3:22 ` Keyon [this message]
2015-11-19 6:56 ` Han Lu
2015-11-18 13:39 ` [PATCH 2/3] ASoC: wm5102: " Vinod Koul
2015-11-19 14:22 ` Charles Keepax
[not found] ` <201511182144.8dDI1Wfc%fengguang.wu@intel.com>
2015-11-20 17:07 ` Vinod Koul
2015-11-18 13:39 ` [PATCH 3/3] ASoC: core: remove SND_SOC_BYTES_EXT Vinod Koul
2015-11-18 13:53 ` [PATCH 0/3] ASoC: " Takashi Iwai
2015-11-18 18:19 ` Vinod Koul
2015-11-21 14:08 ` Mark Brown
2015-11-22 16:17 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=564D4060.1070909@linux.intel.com \
--to=yang.jie@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=patches.audio@intel.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).