Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Libin Yang <libin.yang@linux.intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: libin.yang@intel.com, mengdong.lin@intel.com,
	alsa-devel@alsa-project.org
Subject: Re: [PATCH v3 0/5] ALSA: hda - hdmi support dynmaic pcm assignment
Date: Fri, 11 Dec 2015 14:14:57 +0800	[thread overview]
Message-ID: <566A69E1.4060102@linux.intel.com> (raw)
In-Reply-To: <s5h8u52mmif.wl-tiwai@suse.de>

Hi Takashi,

On 12/10/2015 10:00 PM, Takashi Iwai wrote:
> On Thu, 10 Dec 2015 02:52:07 +0100,
> libin.yang@linux.intel.com wrote:
>>
>> From: Libin Yang <libin.yang@linux.intel.com>
>>
>> The patches are trying to support dynamically binding PCM to pin
>> in HDMI/DP audio.
>>
>> The pin will not bind to any PCM if there is not monitor connected.
>> When there is a monitor connected to the port (pin), driver will
>> try to find a proper PCM to assign to the port and setup the pin
>> if necessary.
>
> Could you rebase your work on the branch topic/hdmi-jack?  It contains
> the upcoming changes for ELD notify callback.  This would impact on
> your patchset, likely require a slight adjustment.

Sure, I will rebase the patches on the branch hdmi-jack.

>
> Also, do you have the applicable MST audio patchset for drm/i915 side,
> too?  I'd like to test it together with the new patchset.

Oh, yes, I have sent the patches to intel-gfx mailing list. Sorry to 
forget to CC you. I have CCed you and ALSA mailing list the patches in 
that thread now.

The drm/i915 patches are ported from Dave's patch.

Best Regards,
Libin

>
>
> thanks,
>
> Takashi
>
>>
>> Libin Yang (5):
>>    ALSA: hda - hdmi begin to support dynamic PCM assignment
>>    ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode
>>    ALSA: hda - hdmi operate spdif based on pcm
>>    ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug
>>    ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic
>>      assignment mode
>>
>>   sound/pci/hda/hda_codec.h  |   1 +
>>   sound/pci/hda/patch_hdmi.c | 369 ++++++++++++++++++++++++++++++++++++++++++---
>>   2 files changed, 347 insertions(+), 23 deletions(-)
>>
>> --
>> 1.9.1
>>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>

      reply	other threads:[~2015-12-11  6:17 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-10  1:52 [PATCH v3 0/5] ALSA: hda - hdmi support dynmaic pcm assignment libin.yang
2015-12-10  1:52 ` [PATCH v3 1/5] ALSA: hda - hdmi begin to support dynamic PCM assignment libin.yang
2015-12-10  1:52 ` [PATCH v3 2/5] ALSA: hda - hdmi playback without monitor in dynamic pcm bind mode libin.yang
2015-12-10  1:52 ` [PATCH v3 3/5] ALSA: hda - hdmi operate spdif based on pcm libin.yang
2015-12-10  1:52 ` [PATCH v3 4/5] ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug libin.yang
2015-12-10  1:52 ` [PATCH v3 5/5] ALSA: hda - hdmi setup pin when monitor hotplug in pcm dynamic assignment mode libin.yang
2015-12-11 10:58   ` Takashi Iwai
2015-12-14  8:16     ` Yang, Libin
2015-12-10 14:00 ` [PATCH v3 0/5] ALSA: hda - hdmi support dynmaic pcm assignment Takashi Iwai
2015-12-11  6:14   ` Libin Yang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=566A69E1.4060102@linux.intel.com \
    --to=libin.yang@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=libin.yang@intel.com \
    --cc=mengdong.lin@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox