From: Julian Margetson <runaway@candw.ms>
To: Pavel Hofman <pavel.hofman@ivitera.com>, Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: Issues with ALSA:ice1724 sound cards on powerpc machines
Date: Wed, 13 Apr 2016 13:59:35 -0400 [thread overview]
Message-ID: <570E8907.4020907@candw.ms> (raw)
In-Reply-To: <570C21D5.7000106@candw.ms>
On 4/11/2016 6:14 PM, Julian Margetson wrote:
> On 4/11/2016 1:32 PM, Julian Margetson wrote:
>> On 4/11/2016 10:44 AM, Pavel Hofman wrote:
>>> Dne 11.4.2016 v 16:11 Takashi Iwai napsal(a):
>>>> On Mon, 04 Apr 2016 21:58:14 +0200,
>>>> Julian Margetson wrote:
>>>>>
>>>>> On 2/17/2016 2:29 PM, Julian Margetson wrote:
>>>>>> Hi
>>>>>>
>>>>>> Having an issue issue with ice1724 sound cards on powerpc
>>>>>> motherboards.
>>>>>> Motherboards in question Acube Sam460ex .
>>>>>> The card appears as a valid device but there is no sound output
>>>>>> on the
>>>>>> majority of boots of the computer.
>>>>>> Logs attached.
>>>>>> On the first set boot audio playback produced sound ok.
>>>>>> On the second set boot no sound was produce with audio playback
>>>>>>
>>>>>>
>>>>>> Regards
>>>>>> Julian Margetson
>>>>>>
>>>>>>
>>>>>>
>>>>> Anyone have any ideas ?
>>>>>
>>>>> Resubmitting again with links to logs instead of included as
>>>>> attachments.
>>>>> The issue also seen on A-Eon Cyrus P5020 motherboard .
>>>>>
>>>>> https://www.dropbox.com/s/72labcje9z1r1b7/1alsa-info.txt.7CLHMG0Gap?dl=0
>>>>>
>>>>> https://www.dropbox.com/s/v1pn5kjqrvwu16f/boot_1.log?dl=0
>>>>> https://www.dropbox.com/s/uuaa14rkpmmz1o0/2alsa-info.txt.VKiEVuytiJ?dl=0
>>>>>
>>>>> https://www.dropbox.com/s/wwu2f5t93l8g26d/boot_2.log?dl=0
>>>>
>>>> I have no concrete idea, but in general, the usual problems on PPC are
>>>> either related with cache coherency or byte endianness. I don't know
>>>> of any issue with the latter in ice1724 driver, so likely it's the
>>>> former.
>>>>
>>>
>>> Perhaps the ice1724 driver was not even tested properly with the
>>> AC97 codec. Do we know of any separate PCI ice1724 card with this
>>> codec?
>>>
>>> Regards,
>>>
>>> Pavel Hofman.
>>>
>>>
>> The second board mentioned , the Aeon Cyrus ,uses a P5020 so is cache
>> coherent .
>> The problem may be in the initialization of the sound card as on some
>> boots with my board , an Acube Sam460ex, it works perfectly. I have
>> tested a CMI8738 pciex1 sound card which works perfectly as do USB
>> cm108 based external cards .
>>
>> I also have a PCI ice1724 version of the card (never used in this
>> machine) as well as 2 different pciex1 ice1724 cards with the codec .
>> The Sam460ex only has 1 pci slot normally used for the SATA card and
>> 1 shared pcie or SATA II.
>> I could test with the pci card by booting from USB .
>> So either configure as 1 pciex1 slot or 1 on board SATA II .
>> I am helping to test the onboard sata-dwc but am happy to test any
>> ideas for a solution to the audio issues as well.
>> Will mean reconfiguring my machine back an forth but worth it for
>> solutions in both areas .
>>
>> Regards
>> Julian
>>
>>
>>
>>
> This is the pci model .
>
> http://www.amazon.com/SIIG-Soundwave-5-1-Pci-lp-LP-000022-S2/dp/B0036VNVWE
>
PCI model has IRQ problem with the Sam460ex so that option wont be of
any help.
[ 6.283945] snd_ice1724 0001:00:04.0: unable to grab IRQ 0
[ 6.283973] snd_ice1724: probe of 0001:00:04.0 failed with error -5
next prev parent reply other threads:[~2016-04-13 17:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <56C4BC13.2010306@candw.ms>
2016-02-20 9:35 ` Issues with ALSA:ice1724 sound cards on powerpc machines Julian Margetson
2016-04-04 19:58 ` Julian Margetson
2016-04-11 14:11 ` Takashi Iwai
2016-04-11 14:44 ` Pavel Hofman
2016-04-11 14:47 ` Takashi Iwai
2016-04-11 17:32 ` Julian Margetson
2016-04-11 22:14 ` Julian Margetson
2016-04-13 17:59 ` Julian Margetson [this message]
2016-04-20 11:44 ` Julian Margetson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570E8907.4020907@candw.ms \
--to=runaway@candw.ms \
--cc=alsa-devel@alsa-project.org \
--cc=pavel.hofman@ivitera.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).