From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002174]: No sound at all using snd-hda-intel / alsa-1.0.11
Date: Wed, 14 Jun 2006 13:17:33 +0200 [thread overview]
Message-ID: <5e04486fccabb2f72a32d5da655d74fd@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2174>
======================================================================
Reported By: carllivitt
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 2174
Category: PCI - hda-intel
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: Fedora Core 5
Kernel Version: 2.6.16-1.2122_FC5smp
======================================================================
Date Submitted: 05-30-2006 17:11 CEST
Last Modified: 06-14-2006 13:17 CEST
======================================================================
Summary: No sound at all using snd-hda-intel / alsa-1.0.11
Description:
On my new Toshiba Satellite Pro P100 laptop, I cannot get sound from the
speakers or headphone jack. It has never worked.
I've used the standard FC5 kernel and the updated kernel
(2.6.16-1.2122FC5smp) without success.
I've downloaded and installed the alsa-*-1.0.11 drivers etc, but still no
sound. Everything is unmuted, alsamixer can turn the volume controls up
and down, KDE's kmix also works fine but still no sound. There are no
error messages in the syslog.
I've also tried using the 'single_cmd=1' module loading option.
I tried the CVS version of ALSA, but it didn't work with my kernel - there
were unresolved symbols that I couldn't resolve. I'm back to using the
1.0.11 version.
======================================================================
----------------------------------------------------------------------
carllivitt - 06-14-06 10:21
----------------------------------------------------------------------
I've uploaded the contents of the file /proc/asound/card0/codec#0 as a file
called codec0.txt.
----------------------------------------------------------------------
jlpedrosa - 06-14-06 13:17
----------------------------------------------------------------------
Here's main.... the subsystem insn't the same. I don't know the ALCXXX
where is common. Maybe it's useful for someone..
00:1b.0 Class 0403: 8086:27d8 (rev 02)
Subsystem: 1584:9072
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at fe0f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable -
Capabilities: [70] Express Unknown type IRQ 0
Hope it's useful...
(if somebody need more info just mailme jlpedrosa at gmail)
Jose Luis Pedrosa
Issue History
Date Modified Username Field Change
======================================================================
05-30-06 17:11 carllivitt New Issue
05-30-06 17:11 carllivitt Distribution => Fedora Core 5
05-30-06 17:11 carllivitt Kernel Version => 2.6.16-1.2122_FC5smp
06-04-06 23:36 carllivitt Issue Monitored: carllivitt
06-04-06 23:37 carllivitt Note Added: 0010065
06-12-06 21:51 carllivitt Note Added: 0010174
06-12-06 22:03 rlrevell Note Added: 0010175
06-12-06 22:52 carllivitt Note Added: 0010176
06-12-06 22:54 rlrevell Note Added: 0010177
06-12-06 23:10 carllivitt Note Added: 0010178
06-12-06 23:14 rlrevell Note Added: 0010179
06-12-06 23:29 carllivitt Note Added: 0010180
06-12-06 23:35 rlrevell Note Added: 0010181
06-12-06 23:49 carllivitt Note Added: 0010182
06-12-06 23:58 rlrevell Note Added: 0010183
06-13-06 15:33 godeater Note Added: 0010193
06-13-06 18:13 rlrevell Note Added: 0010198
06-13-06 18:53 jlpedrosa Note Added: 0010199
06-13-06 18:58 rlrevell Note Added: 0010200
06-13-06 19:17 jlpedrosa Note Added: 0010202
06-14-06 10:11 carllivitt File Added: lspci-nv.txt
06-14-06 10:12 carllivitt Note Added: 0010207
06-14-06 10:21 carllivitt File Added: codec0.txt
06-14-06 10:21 carllivitt Note Added: 0010208
06-14-06 13:17 jlpedrosa Note Added: 0010210
======================================================================
next reply other threads:[~2006-06-14 11:17 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-14 11:17 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-26 4:15 [ALSA - driver 0002174]: No sound at all using snd-hda-intel / alsa-1.0.11 bugtrack
2006-07-03 20:19 bugtrack
2006-07-03 20:06 bugtrack
2006-07-03 20:01 bugtrack
2006-06-26 12:29 bugtrack
2006-06-22 15:50 bugtrack
2006-06-22 8:39 bugtrack
2006-06-21 16:44 bugtrack
2006-06-21 15:47 bugtrack
2006-06-20 21:51 bugtrack
2006-06-20 17:45 bugtrack
2006-06-20 17:38 bugtrack
2006-06-20 15:38 bugtrack
2006-06-20 9:21 bugtrack
2006-06-20 9:04 bugtrack
2006-06-19 11:36 bugtrack
2006-06-19 6:42 bugtrack
2006-06-18 10:44 bugtrack
2006-06-17 17:57 bugtrack
2006-06-17 17:51 bugtrack
2006-06-14 8:21 bugtrack
2006-06-14 8:12 bugtrack
2006-06-13 17:17 bugtrack
2006-06-13 16:58 bugtrack
2006-06-13 16:53 bugtrack
2006-06-13 16:13 bugtrack
2006-06-13 13:33 bugtrack
2006-06-12 21:58 bugtrack
2006-06-12 21:49 bugtrack
2006-06-12 21:35 bugtrack
2006-06-12 21:29 bugtrack
2006-06-12 21:14 bugtrack
2006-06-12 21:10 bugtrack
2006-06-12 20:54 bugtrack
2006-06-12 20:52 bugtrack
2006-06-12 20:03 bugtrack
2006-06-12 19:51 bugtrack
2006-06-04 21:37 bugtrack
2006-05-30 15:11 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5e04486fccabb2f72a32d5da655d74fd@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox