From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002244]: Aureon 7.1 Universe speakers in incorrect order when doing a speaker-test
Date: Thu, 20 Jul 2006 04:01:36 +0200 [thread overview]
Message-ID: <64ed8a35f6948d16591300a7edec077f@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2244>
======================================================================
Reported By: calestyo
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 2244
Category: PCI - ice1724
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Debian GNU/Linux
Kernel Version: 2.6.17
======================================================================
Date Submitted: 06-29-2006 01:35 CEST
Last Modified: 07-20-2006 04:01 CEST
======================================================================
Summary: Aureon 7.1 Universe speakers in incorrect order when
doing a speaker-test
Description:
I use my Aureon 7.1 Universe with a TerraTec HomeAreon TXR 884 7.1 speaker
set.
I've connected the outputs of the soundard to those of the subwoofer
which
itself connects the small speakers the following way:
Soundcard -------------- Subwoofer --- Small Speakers
Out Front <---------+--> In FL <-----> Front Left Speaker
\--> In FR <-----> Font Right Speaker
Out Rear <----------+--> In SL <-----> Side Left Speaker
\--> In SR <-----> Side Right Speaker
Out Center/Subwoofer <-> In C <------> Center Speaker
\> In Subwoofer
Out Back Surround <----> In BL <-----> Back Left Speaker
\--> In BR <-----> Back Right Speaker
You might have a look at soundcard manual page 8
(http://supportuk.terratec.net/modules.php?op=modload&name=Downloads&file=index&req=getit&lid=574)
and speaker manual page 12
(http://supportuk.terratec.net/modules.php?op=modload&name=Downloads&file=index&req=getit&lid=724)
My speakers are placed in my room in a configuration as the 7.1 shown on
page 12
in the speaker manual.
As you note the connection from rear to side is a little bit strange (at
least I
thought so,...) but this seems to be correct, because when I use the
windows
mixer supplied by TerraTec itself, there is a surround test included which
shows
the position of the 8 speakers and let me put the indiviually on and off
and
this leads always to the correct position.
The problem now: I tried the same as under Windows unter Linux with the
speaker-test tool.
I called it via speaker-test -t wav -c 8 and the following came out:
What wav file was played ----- in which speaker position the wav file was
played
"Front Left" ----------------- Front Left Speaker (correct)
"Front Center" --------------- Center Speaker (correct)
"Front Right" ---------------- Front Right Speaker (correct)
"Side Right" ----------------- Back Right Speaker (probably wrong!)
"Rear Right" ----------------- Side Right Speaker (probably wrong!)
"Rear Left" ------------------ Side Left Speaker (probably wrong!)
"Side Left" ------------------ Back Left Speaker (probably wrong!)
"LFE" ------------------------ Subwoofer (correct)
No one could think that I should just switch the speaker cables but that
can't
be a proper solution (not only because this would break settings in the
original
Windows driver (which I only use for Upgrading my Plextor drive firmware
;) ).
I think the configuration of the surround for the Aureon 7.1 Universe has
here
some mistake, hasn't it?
======================================================================
----------------------------------------------------------------------
calestyo - 07-19-06 21:30
----------------------------------------------------------------------
Ahh ok,.. now aplay -l and -L are working again,.. however... playing files
(with both speaker test and aplay,.. diffenert options for -D and or
without -D at all) are leading to this error:
$ aplay /usr/share/sounds/alsa/Noise.wav
Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little
Endian, Rate 48000 Hz, Mono
aplay: relocation error: aplay: symbol snd_pcm_hw_params_set_rate_near,
version ALSA_0.9.0rc4 not defined in file libasound.so.2 with link time
reference
----------------------------------------------------------------------
Raymond - 07-20-06 04:01
----------------------------------------------------------------------
alsa-utils depends on alsa-lib, you need to re-build alsa-util
(configure,make,make install)
Please also check the configure options of alsa-utils
alsa-lib need to open a number of conf files (e.g. alsa.conf,
aliases.conf, Aureon71.conf, ... )
strace -e trace=open aplay -v -Dplughw:0 stereo.wav
If the channels are swapped randomly when running speaker-test , this may
related to https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2026
Issue History
Date Modified Username Field Change
======================================================================
06-29-06 01:35 calestyo New Issue
06-29-06 01:35 calestyo Distribution => Debian GNU/Linux
06-29-06 01:35 calestyo Kernel Version => 2.6.17
06-29-06 01:36 calestyo Note Added: 0010634
06-29-06 01:36 calestyo Issue Monitored: calestyo
06-29-06 15:29 Raymond Note Added: 0010647
06-29-06 15:36 calestyo Note Added: 0010648
06-29-06 15:37 calestyo Note Added: 0010649
06-29-06 15:40 Raymond Note Added: 0010650
06-29-06 15:45 calestyo Note Added: 0010651
06-29-06 15:52 Raymond Note Added: 0010652
06-29-06 15:54 Raymond Note Edited: 0010652
06-29-06 15:56 calestyo Note Added: 0010653
06-29-06 15:58 Raymond Note Added: 0010654
06-29-06 16:01 calestyo Note Added: 0010655
06-29-06 16:04 Raymond Note Added: 0010656
06-29-06 16:07 calestyo Note Added: 0010657
06-29-06 16:08 Raymond Note Edited: 0010656
06-29-06 16:12 Raymond Note Added: 0010658
06-29-06 16:19 calestyo Note Added: 0010659
06-29-06 17:50 tiwai Note Added: 0010677
06-29-06 19:05 calestyo Note Added: 0010695
06-30-06 02:02 Raymond Note Added: 0010709
06-30-06 02:14 rlrevell Note Added: 0010711
06-30-06 05:13 Raymond Note Edited: 0010709
07-03-06 19:28 calestyo Note Added: 0010803
07-03-06 19:37 rlrevell Note Added: 0010804
07-17-06 20:49 calestyo Note Added: 0011049
07-18-06 03:23 calestyo Note Added: 0011051
07-18-06 03:23 calestyo Note Deleted: 0011049
07-18-06 05:54 Raymond Note Added: 0011052
07-18-06 05:58 Raymond Note Edited: 0011052
07-18-06 13:37 calestyo Note Added: 0011054
07-18-06 14:24 Raymond Note Added: 0011058
07-18-06 14:25 Raymond Note Edited: 0011058
07-18-06 14:34 calestyo Note Added: 0011059
07-18-06 17:35 Raymond Note Added: 0011067
07-18-06 17:39 Raymond Note Edited: 0011067
07-18-06 18:03 calestyo Note Added: 0011068
07-18-06 18:12 Raymond Note Added: 0011069
07-18-06 18:30 calestyo Note Added: 0011070
07-19-06 03:36 Raymond Note Added: 0011077
07-19-06 05:50 Raymond Note Edited: 0011077
07-19-06 11:50 calestyo Note Added: 0011084
07-19-06 12:03 Raymond Note Added: 0011085
07-19-06 12:06 Raymond Note Edited: 0011085
07-19-06 12:11 calestyo Note Added: 0011086
07-19-06 16:46 Raymond Note Added: 0011087
07-19-06 18:21 calestyo Note Added: 0011091
07-19-06 18:22 calestyo Note Added: 0011092
07-19-06 20:01 tiwai Note Added: 0011093
07-19-06 21:30 calestyo Note Added: 0011102
07-20-06 04:01 Raymond Note Added: 0011106
======================================================================
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next reply other threads:[~2006-07-20 2:01 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-20 2:01 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-27 10:34 [ALSA - driver 0002244]: Aureon 7.1 Universe speakers in incorrect order when doing a speaker-test bugtrack
2006-07-27 10:29 bugtrack
2006-07-24 2:04 bugtrack
2006-07-21 16:51 bugtrack
2006-07-21 8:39 bugtrack
2006-07-21 8:27 bugtrack
2006-07-21 2:27 bugtrack
2006-07-20 12:47 bugtrack
2006-07-20 12:37 bugtrack
2006-07-20 12:25 bugtrack
2006-07-20 12:09 bugtrack
2006-07-20 11:57 bugtrack
2006-07-20 11:44 bugtrack
2006-07-20 10:48 bugtrack
2006-07-20 10:38 bugtrack
2006-07-20 6:06 bugtrack
2006-07-19 19:30 bugtrack
2006-07-19 18:01 bugtrack
2006-07-19 16:22 bugtrack
2006-07-19 16:21 bugtrack
2006-07-19 14:46 bugtrack
2006-07-19 10:11 bugtrack
2006-07-19 10:03 bugtrack
2006-07-19 9:50 bugtrack
2006-07-19 1:36 bugtrack
2006-07-18 16:30 bugtrack
2006-07-18 16:12 bugtrack
2006-07-18 16:03 bugtrack
2006-07-18 15:35 bugtrack
2006-07-18 12:34 bugtrack
2006-07-18 12:24 bugtrack
2006-07-18 11:37 bugtrack
2006-07-18 3:54 bugtrack
2006-07-18 1:23 bugtrack
2006-07-17 18:49 bugtrack
2006-07-03 17:37 bugtrack
2006-07-03 17:28 bugtrack
2006-06-30 0:14 bugtrack
2006-06-30 0:02 bugtrack
2006-06-29 17:05 bugtrack
2006-06-29 15:50 bugtrack
2006-06-29 14:19 bugtrack
2006-06-29 14:12 bugtrack
2006-06-29 14:07 bugtrack
2006-06-29 14:04 bugtrack
2006-06-29 14:01 bugtrack
2006-06-29 13:58 bugtrack
2006-06-29 13:56 bugtrack
2006-06-29 13:52 bugtrack
2006-06-29 13:45 bugtrack
2006-06-29 13:40 bugtrack
2006-06-29 13:37 bugtrack
2006-06-29 13:36 bugtrack
2006-06-29 13:29 bugtrack
2006-06-28 23:36 bugtrack
2006-06-28 23:35 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=64ed8a35f6948d16591300a7edec077f@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox