From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001365]: Dell/Creative Labs Audigy 2 ZS: No capture control
Date: Mon, 31 Jul 2006 18:32:11 +0200 [thread overview]
Message-ID: <68c7de11162982be5c17a4bb4ef77f25@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1365>
======================================================================
Reported By: phineas
Assigned To: jcdutton
======================================================================
Project: ALSA - driver
Issue ID: 1365
Category: PCI - emu10k1
Reproducibility: always
Severity: feature
Priority: normal
Status: feedback
Distribution: Debian testing (etch)
Kernel Version: 2.6.12.4 vanilla
======================================================================
Date Submitted: 08-24-2005 09:22 CEST
Last Modified: 07-31-2006 18:32 CEST
======================================================================
Summary: Dell/Creative Labs Audigy 2 ZS: No capture control
Description:
Unless this is a user overlooking a step...
There is no mute control on the "Master" item (or most other items for
that matter).
More importantly, the capture items do not have a capture control; they
have level adjustments, but one cannot actually select an item for
capturing.
It appears that this Dell-supplied device (with Audigy subsytem 1003) is
generally unknown to the drivers -- but it does work well for sound
playback.
======================================================================
----------------------------------------------------------------------
jcdutton - 07-30-06 18:10
----------------------------------------------------------------------
Can you please confirm what is says on the actual PCI card?
SB0353 or SB0253.
Can you also list what you tested. Just saying it worked is not very
detailed.
E.g.
Speaker outputs for front, rear, center/lfe and side work.
Mic input works
Line input works.
If you did not test everything, just say "not tested" next to it.
----------------------------------------------------------------------
phineas - 07-31-06 18:32
----------------------------------------------------------------------
The card is etched with "SB0350" and the stickers on the back also say
"SB0350"
A part list from dell called this a SB0353 -- but I generally don't argue
with what is etched in a board.
I have been happily using the card with alsa 1.0.11rc4 (Wed Mar 22
10:27:24 2006 UTC). However, the card is still unknown:
$ cat /proc/asound/cards
0 [Audigy2 ]: Audigy2 - Audigy 2 [Unknown]
Audigy 2 [Unknown] (rev.4, serial:0x10031102) at
0xdcc0, irq 17
I say "happily using" ... here is what little I regularly use, and have
tested:
PCM playback to analog front stereo speakers: works well
Aux 1/8" analog line in playthrough: works well
Aux 1/8" analog line in to Analog_Mix and
PCM capture from Analog_Mix: works well except very low volume (low volume
could easily just be the source signal though...)
I'll try to apply the patch again from pzad, 8-28-05, and will report back
later.
Issue History
Date Modified Username Field Change
======================================================================
08-24-05 09:22 phineas New Issue
08-24-05 09:22 phineas File Added: vegan.state
08-24-05 09:22 phineas Distribution => Debian testing (etch)
08-24-05 09:22 phineas Kernel Version => 2.6.12.4 vanilla
08-24-05 20:58 phineas Issue Monitored: phineas
08-25-05 17:11 pzad Note Added: 0005941
08-26-05 22:04 phineas Note Added: 0005958
09-17-05 18:54 jdthood Summary Dell/Creative Labs Audigy
2 ZS mixer controls => Dell/Creative Labs Audigy 2 ZS: No capture control
12-14-05 23:03 phineas Note Added: 0007043
07-18-06 14:43 jcdutton Status new => assigned
07-18-06 14:43 jcdutton Assigned To => jcdutton
07-30-06 18:10 jcdutton Note Added: 0011322
07-30-06 18:10 jcdutton Status assigned => feedback
07-31-06 18:32 phineas Note Added: 0011345
======================================================================
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next reply other threads:[~2006-07-31 16:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-31 16:32 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-07-30 16:10 [ALSA - driver 0001365]: Dell/Creative Labs Audigy 2 ZS: No capture control bugtrack
2006-07-18 12:43 bugtrack
2005-12-14 22:03 bugtrack
2005-09-17 16:54 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=68c7de11162982be5c17a4bb4ef77f25@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox