From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - plugins 0001949]: pcm.jack config in alsa-plugins/doc/README-jack
Date: Thu, 23 Mar 2006 16:48:37 +0100 [thread overview]
Message-ID: <78a26ad4595645ff0ce8dca44408e191@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1949>
======================================================================
Reported By: Raymond
Assigned To:
======================================================================
Project: ALSA - plugins
Issue ID: 1949
Category: PCM - jack
Reproducibility: always
Severity: minor
Priority: normal
Status: new
======================================================================
Date Submitted: 03-21-2006 06:18 CET
Last Modified: 03-23-2006 16:48 CET
======================================================================
Summary: pcm.jack config in alsa-plugins/doc/README-jack
Description:
In alsa-plugins/doc/README-jack
pcm.jack {
type jack
playback_ports {
0 alsa_pcm:playback_1
1 alsa_pcm:playback_1
}
capture_ports {
0 alsa_pcm:capture_1
1 alsa_pcm:pcapture_1
}
}
There are four entries in Writable clients in qjackctl (jack-0.100.0)
playback_1
playback_2
playback_3
playback_4
two entries in Readable clients
capture_1
capture_2
======================================================================
----------------------------------------------------------------------
Raymond - 03-23-06 15:20
----------------------------------------------------------------------
The reason of not hearing any sound from the front speakers of au8830 using
alsa-plugin - jack is due to front and rear swap bug in
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1726
It will also need the fix in
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1766 for jackd to open
the correct
capture channels of au8830
It seem that snd_pcm_hw_params_get_channels_max() return max_channels
10000 for "plug:jack"
----------------------------------------------------------------------
Raymond - 03-23-06 16:48
----------------------------------------------------------------------
If reducing the output channels to 1.
jackd -d alsa -o 1 -S
jackd 0.100.0
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|0|1|nomon|swmeter|-|16bit
control device hw:0
configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
It seem that aplay wait/hang instead of abort with error
aplay -v -Dplug:jack stereo.wav
Playing WAVE 'stereo.wav' : Signed 16 bit Little Endian, Rate 22050 Hz,
Stereo
Plug PCM: Rate conversion PCM (48000, sformat=S16_LE)
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 22050
exact rate : 22050 (22050/1)
msbits : 16
buffer_size : 11025
period_size : 2756
period_time : 125000
tick_time : 0
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 2756
xfer_align : 2756
start_threshold : 11024
stop_threshold : 11025
silence_threshold: 0
silence_size : 0
boundary : 722534400
Slave: Linear Integer <-> Linear Float conversion PCM (FLOAT_LE)
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 24000
period_size : 6000
period_time : 125000
tick_time : 0
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 6000
xfer_align : 6000
start_threshold : 24000
stop_threshold : 24000
silence_threshold: 0
silence_size : 0
boundary : 1572864000
Slave: ALSA <-> JACK PCM I/O Plugin
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : FLOAT_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 32
buffer_size : 24000
period_size : 6000
period_time : 125000
tick_time : 0
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 6000
xfer_align : 6000
start_threshold : 24000
stop_threshold : 24000
silence_threshold: 0
silence_size : 0
boundary : 1572864000
cannot connect alsa-jack.jackP.5653.0:out_001
to alsa_pcm:playback_2
Issue History
Date Modified Username Field Change
======================================================================
03-21-06 06:18 Raymond New Issue
03-21-06 07:42 Raymond Note Added: 0008738
03-22-06 16:54 Raymond Note Added: 0008863
03-22-06 17:02 Raymond Note Edited: 0008863
03-22-06 18:47 tiwai Note Added: 0008865
03-23-06 03:44 Raymond Note Added: 0008878
03-23-06 05:51 Raymond Note Edited: 0008878
03-23-06 15:17 Raymond Note Added: 0008882
03-23-06 15:19 Raymond Note Edited: 0008882
03-23-06 15:20 Raymond Note Edited: 0008882
03-23-06 16:48 Raymond Note Added: 0008889
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
next reply other threads:[~2006-03-23 15:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-23 15:48 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-04-13 12:50 [ALSA - plugins 0001949]: pcm.jack config in alsa-plugins/doc/README-jack bugtrack
2006-04-12 14:10 bugtrack
2006-03-23 14:17 bugtrack
2006-03-23 2:44 bugtrack
2006-03-22 17:47 bugtrack
2006-03-22 15:54 bugtrack
2006-03-21 6:42 bugtrack
2006-03-21 5:18 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=78a26ad4595645ff0ce8dca44408e191@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox