Re: [PATCH v4 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation

[Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>]

Hi Sameer

Thank you for your feedback

> > +  endpoint:
> > +    type: object
> > +    properties:
> > +      remote-endpoint:
> > +        maxItems: 1
> > +      mclk-fs:
> > +        description: |
> > +          Multiplication factor between stream rate and codec mclk.
> > +          When defined, mclk-fs property defined in dai-link sub nodes are ignored.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +      frame-inversion:
> > +        description: dai-link uses frame clock inversion
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +      bitclock-inversion:
> > +        description: dai-link uses bit clock inversion
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +      frame-master:
> > +        description: Indicates dai-link frame master.
> > +        $ref: /schemas/types.yaml#/definitions/phandle-array
> > +        maxItems: 1
> > +      bitclock-master:
> > +        description: Indicates dai-link bit clock master
> > +        $ref: /schemas/types.yaml#/definitions/phandle-array
> > +        maxItems: 1
> > +      dai-format:
> > +        description: audio format.
> > +        items:
> > +          enum:
> > +            - i2s
> > +            - right_j
> > +            - left_j
> > +            - dsp_a
> > +            - dsp_b
> > +            - ac97
> > +            - pdm
> > +            - msb
> > +            - lsb
> > +      convert-rate:
> > +        description: CPU to Codec rate convert.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +      convert-channels:
> > +        description: CPU to Codec rate channels.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +    required:
> > +      - remote-endpoint
> > +
> 
> Sorry this point was not clear to me. Can 'endpoint' exist without
> port/ports? Should this rather be moved inside of port?

Ahh, yes.
You had been indicated it in previous mail.
I will try to move under port in v5

Thank you for your help !!

Best regards
---
Kuninori Morimoto