From: Jani Nikula <jani.nikula@linux.intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>,
maarten.lankhorst@linux.intel.com
Cc: Takashi Iwai <tiwai@suse.de>,
intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
alsa-devel@alsa-project.org, "Saarinen,
Jani" <jani.saarinen@intel.com>,
"Kurmi, Suresh Kumar" <suresh.kumar.kurmi@intel.com>
Subject: Re: [Intel-xe] [PATCH 11/14] ALSA: hda/intel: Move snd_hdac_i915_init to before probe_work.
Date: Tue, 14 Nov 2023 14:35:10 +0200 [thread overview]
Message-ID: <87bkbwsebl.fsf@intel.com> (raw)
In-Reply-To: <ZVNUxZzCGcxQzqJX@intel.com>
On Tue, 14 Nov 2023, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Mon, Oct 02, 2023 at 09:38:44PM +0200, maarten.lankhorst@linux.intel.com wrote:
>> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
>>
>> Now that we can use -EPROBE_DEFER, it's no longer required to spin off
>> the snd_hdac_i915_init into a workqueue.
>>
>> Use the -EPROBE_DEFER mechanism instead, which must be returned in the
>> probe function.
>
> This completely broke i915 audio!
>
> I also can't see any trace of this stuff ever being posted to
> intel-gfx so it never went through the CI.
>
> Please fix or revert ASAP.
Cc: Jani, Suresh
Ville, please file a bug at gitlab so we can track this, thanks.
BR,
Jani.
>
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
>> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
>> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
>> Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
>> ---
>> sound/pci/hda/hda_intel.c | 54 +++++++++++++++++++--------------------
>> 1 file changed, 27 insertions(+), 27 deletions(-)
>>
>> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
>> index e42ad0e816e1..9dad3607596a 100644
>> --- a/sound/pci/hda/hda_intel.c
>> +++ b/sound/pci/hda/hda_intel.c
>> @@ -2135,6 +2135,33 @@ static int azx_probe(struct pci_dev *pci,
>>
>> pci_set_drvdata(pci, card);
>>
>> +#ifdef CONFIG_SND_HDA_I915
>> + /* bind with i915 if needed */
>> + if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT) {
>> + err = snd_hdac_i915_init(azx_bus(chip), false);
>> + if (err < 0) {
>> + /* if the controller is bound only with HDMI/DP
>> + * (for HSW and BDW), we need to abort the probe;
>> + * for other chips, still continue probing as other
>> + * codecs can be on the same link.
>> + */
>> + if (HDA_CONTROLLER_IN_GPU(pci)) {
>> + goto out_free;
>> + } else {
>> + /* don't bother any longer */
>> + chip->driver_caps &= ~AZX_DCAPS_I915_COMPONENT;
>> + }
>> + }
>> +
>> + /* HSW/BDW controllers need this power */
>> + if (HDA_CONTROLLER_IN_GPU(pci))
>> + hda->need_i915_power = true;
>> + }
>> +#else
>> + if (HDA_CONTROLLER_IN_GPU(pci))
>> + dev_err(card->dev, "Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915\n");
>> +#endif
>> +
>> err = register_vga_switcheroo(chip);
>> if (err < 0) {
>> dev_err(card->dev, "Error registering vga_switcheroo client\n");
>> @@ -2162,11 +2189,6 @@ static int azx_probe(struct pci_dev *pci,
>> }
>> #endif /* CONFIG_SND_HDA_PATCH_LOADER */
>>
>> -#ifndef CONFIG_SND_HDA_I915
>> - if (HDA_CONTROLLER_IN_GPU(pci))
>> - dev_err(card->dev, "Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915\n");
>> -#endif
>> -
>> if (schedule_probe)
>> schedule_delayed_work(&hda->probe_work, 0);
>>
>> @@ -2264,28 +2286,6 @@ static int azx_probe_continue(struct azx *chip)
>> to_hda_bus(bus)->bus_probing = 1;
>> hda->probe_continued = 1;
>>
>> - /* bind with i915 if needed */
>> - if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT) {
>> - err = snd_hdac_i915_init(bus, true);
>> - if (err < 0) {
>> - /* if the controller is bound only with HDMI/DP
>> - * (for HSW and BDW), we need to abort the probe;
>> - * for other chips, still continue probing as other
>> - * codecs can be on the same link.
>> - */
>> - if (HDA_CONTROLLER_IN_GPU(pci)) {
>> - goto out_free;
>> - } else {
>> - /* don't bother any longer */
>> - chip->driver_caps &= ~AZX_DCAPS_I915_COMPONENT;
>> - }
>> - }
>> -
>> - /* HSW/BDW controllers need this power */
>> - if (HDA_CONTROLLER_IN_GPU(pci))
>> - hda->need_i915_power = true;
>> - }
>> -
>> /* Request display power well for the HDA controller or codec. For
>> * Haswell/Broadwell, both the display HDA controller and codec need
>> * this power. For other platforms, like Baytrail/Braswell, only the
>> --
>> 2.40.1
--
Jani Nikula, Intel
next prev parent reply other threads:[~2023-11-14 12:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20231002193847.7134-1-maarten.lankhorst@linux.intel.com>
[not found] ` <20231002193847.7134-11-maarten.lankhorst@linux.intel.com>
2023-11-14 11:06 ` [Intel-xe] [PATCH 11/14] ALSA: hda/intel: Move snd_hdac_i915_init to before probe_work Ville Syrjälä
2023-11-14 12:35 ` Jani Nikula [this message]
2023-11-14 13:29 ` Maarten Lankhorst
2023-11-14 13:31 ` Saarinen, Jani
2023-11-14 16:52 ` Takashi Iwai
2023-11-14 17:24 ` Jani Nikula
2023-11-15 8:15 ` Kai Vehmanen
2023-11-14 13:39 ` Ville Syrjälä
2023-11-14 14:39 ` Maarten Lankhorst
2023-11-14 15:50 ` Takashi Iwai
2023-11-14 15:52 ` Maarten Lankhorst
2023-11-14 15:09 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bkbwsebl.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.saarinen@intel.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=suresh.kumar.kurmi@intel.com \
--cc=tiwai@suse.de \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox