From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0002159]: ac3 passthrough not working on recent versions
Date: Fri, 4 Aug 2006 02:35:37 +0200 [thread overview]
Message-ID: <87c19d79fe375a234b99b77aad2de766@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2159>
======================================================================
Reported By: nikke
Assigned To: Clemens Ladisch
======================================================================
Project: ALSA - driver
Issue ID: 2159
Category: PCI - ymfpci
Reproducibility: always
Severity: minor
Priority: normal
Status: feedback
Distribution: Debian
Kernel Version: 2.6.15
======================================================================
Date Submitted: 05-24-2006 23:44 CEST
Last Modified: 08-04-2006 02:35 CEST
======================================================================
Summary: ac3 passthrough not working on recent versions
Description:
Using the following AC3 passthrough with mplayer works:
Linux 2.4.31
alsa-driver 1.0.8-7 (debian stable packaged)
Using Linux 2.6.15 (both with alsa-driver 1.10rc3 that ships with the
kernel and
alsa-driver 1.0.11) it doesn't work. The reciever just says "unlock" and
stays quiet.
The only change is booting with different kernels, no other config or
hardware is touched, so this must be a driver regression.
The card is YMF-754 based, connected with coax spdif to my HK reciever.
If you need more info, just tell me and I'll dig it up.
======================================================================
----------------------------------------------------------------------
Quiverth - 08-03-06 14:15
----------------------------------------------------------------------
Added /etc/asound.state from ALSA 1.0.12rc1. AC3 passthrough is not working
for me. To my eyes the controls seem to be present, and the digital output
does work, just not AC3 pass-through.
----------------------------------------------------------------------
Raymond - 08-04-06 02:35
----------------------------------------------------------------------
The pcm volume per voice is initialised in snd_ymfpci_mixer(),
chip->pcm_mixer[idx].left = 0x8000;
chip->pcm_mixer[idx].right = 0x8000;
alsactl restore value from /etc/asound.state after the driver is loaded.
26214 =0x6666
Do the driver need to check the access flag
(SNDRV_CTL_ELEM_ACCESS_INACTIVE) in snd_ymfpci_pcm_vol_put() ?
control.60 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 32768'
iface PCM
name 'PCM Playback Volume'
value.0 26214
value.1 26214
}
control.61 {
comment.access 'read write inactive'
comment.type INTEGER
comment.count 2
comment.range '0 - 32768'
iface PCM
subdevice 1
name 'PCM Playback Volume'
value.0 26214
value.1 26214
}
...
control.90 {
comment.access 'read write inactive'
comment.type INTEGER
comment.count 2
comment.range '0 - 32768'
iface PCM
subdevice 30
name 'PCM Playback Volume'
value.0 26214
value.1 26214
}
control.91 {
comment.access 'read write inactive'
comment.type INTEGER
comment.count 2
comment.range '0 - 32768'
iface PCM
subdevice 31
name 'PCM Playback Volume'
value.0 26214
value.1 26214
}
Issue History
Date Modified Username Field Change
======================================================================
05-24-06 23:44 nikke New Issue
05-24-06 23:44 nikke Distribution => Debian
05-24-06 23:44 nikke Kernel Version => 2.6.15
05-24-06 23:47 nikke Issue Monitored: nikke
06-02-06 04:23 Raymond Note Added: 0010045
06-02-06 04:25 Raymond Note Edited: 0010045
06-12-06 13:14 Mimosius Issue Monitored: Mimosius
06-14-06 22:32 nikke Note Added: 0010216
06-15-06 02:18 Raymond Note Added: 0010221
06-15-06 02:27 Raymond Note Edited: 0010221
06-15-06 11:03 Mimosius Note Added: 0010237
06-15-06 23:43 nikke Note Added: 0010246
06-16-06 13:01 Mimosius Note Added: 0010250
06-16-06 13:16 Mimosius Note Edited: 0010250
06-16-06 13:26 Raymond Note Added: 0010251
06-16-06 13:31 Raymond Note Edited: 0010251
06-16-06 13:37 Mimosius Note Added: 0010252
06-16-06 16:25 Raymond Note Added: 0010255
06-17-06 01:17 nikke Note Added: 0010262
06-17-06 02:43 Raymond Note Edited: 0010251
06-17-06 10:21 Raymond Note Added: 0010266
06-17-06 10:24 Raymond Note Edited: 0010266
06-17-06 11:02 Raymond Note Added: 0010267
06-17-06 14:25 Raymond Note Added: 0010268
06-17-06 15:16 nikke Note Added: 0010269
06-17-06 16:10 Raymond Note Added: 0010270
06-17-06 16:23 Raymond Note Edited: 0010270
06-17-06 18:22 rlrevell Note Added: 0010280
06-18-06 04:03 Raymond Note Added: 0010295
06-18-06 04:08 Raymond Note Edited: 0010295
06-18-06 04:14 Raymond Note Edited: 0010295
06-18-06 13:30 Raymond Note Edited: 0010295
06-19-06 13:11 Clemens LadischStatus new => assigned
06-19-06 13:11 Clemens LadischAssigned To => Clemens Ladisch
06-19-06 13:33 Clemens LadischStatus assigned => resolved
06-19-06 13:33 Clemens LadischResolution open => not fixable
06-19-06 13:33 Clemens LadischNote Added: 0010307
06-19-06 21:43 nikke Status resolved => feedback
06-19-06 21:43 nikke Resolution not fixable => reopened
06-19-06 21:43 nikke Note Added: 0010320
06-19-06 22:10 Mimosius Note Added: 0010321
06-20-06 04:56 Raymond Note Added: 0010325
06-20-06 04:57 Raymond Note Edited: 0010325
07-24-06 13:26 Quiverth Issue Monitored: Quiverth
08-03-06 14:08 Quiverth File Added: asound.state
08-03-06 14:15 Quiverth Note Added: 0011400
08-04-06 02:35 Raymond Note Added: 0011417
======================================================================
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next reply other threads:[~2006-08-04 0:35 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-04 0:35 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-08-03 12:15 [ALSA - driver 0002159]: ac3 passthrough not working on recent versions bugtrack
2006-06-20 2:56 bugtrack
2006-06-19 20:10 bugtrack
2006-06-19 19:43 bugtrack
2006-06-19 11:33 bugtrack
2006-06-19 17:00 ` Glen Masgai
2006-06-19 11:11 bugtrack
2006-06-17 16:22 bugtrack
2006-06-17 14:10 bugtrack
2006-06-17 13:16 bugtrack
2006-06-17 12:25 bugtrack
2006-06-17 9:02 bugtrack
2006-06-17 8:21 bugtrack
2006-06-16 23:17 bugtrack
2006-06-16 14:25 bugtrack
2006-06-16 11:37 bugtrack
2006-06-16 11:26 bugtrack
2006-06-16 11:01 bugtrack
2006-06-15 21:43 bugtrack
2006-06-15 9:03 bugtrack
2006-06-15 0:18 bugtrack
2006-06-14 20:32 bugtrack
2006-06-02 2:23 bugtrack
2006-05-24 21:44 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87c19d79fe375a234b99b77aad2de766@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox