From: Takashi Iwai <tiwai@suse.de>
To: Baojun Xu <baojun.xu@ti.com>
Cc: <broonie@kernel.org>, <andriy.shevchenko@linux.intel.com>,
<13916275206@139.com>, <alsa-devel@alsa-project.org>,
<shenghao-ding@ti.com>, <linux-sound@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <lgirdwood@gmail.com>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<devicetree@vger.kernel.org>, <k-yi@ti.com>, <henry.lo@ti.com>,
<robinchen@ti.com>, <jesse-ji@ti.com>, <will-wang@ti.com>,
<jim.shil@goertek.com>, <toastcheng@google.com>,
<chinkaiting@google.com>
Subject: Re: [PATCH v2 1/2] ASoC: tas2781: Add tas5828 support
Date: Fri, 26 Sep 2025 20:13:06 +0200 [thread overview]
Message-ID: <87ldm1axql.wl-tiwai@suse.de> (raw)
In-Reply-To: <20250926043339.8419-1-baojun.xu@ti.com>
On Fri, 26 Sep 2025 06:33:38 +0200,
Baojun Xu wrote:
>
> TAS5828 have on-chip DSP without current/voltage feedback.
>
> Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Please use a different subject for each patch. Both patches are 100%
identical subject, and that makes harder to identify.
thanks,
Takashi
>
> ---
> v2:
> - Update description for TAS5828
> - Change commit tree to .../tiwai/sound.git.
> ---
> include/sound/tas2781.h | 1 +
> sound/soc/codecs/tas2781-i2c.c | 7 ++++++-
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h
> index ddd997ac3..a37b4d67c 100644
> --- a/include/sound/tas2781.h
> +++ b/include/sound/tas2781.h
> @@ -122,6 +122,7 @@ enum audio_device {
> TAS2781,
> TAS5825,
> TAS5827,
> + TAS5828,
> TAS_OTHERS,
> };
>
> diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c
> index 1539b7088..f62a71dca 100644
> --- a/sound/soc/codecs/tas2781-i2c.c
> +++ b/sound/soc/codecs/tas2781-i2c.c
> @@ -110,6 +110,7 @@ static const struct i2c_device_id tasdevice_id[] = {
> { "tas2781", TAS2781 },
> { "tas5825", TAS5825 },
> { "tas5827", TAS5827 },
> + { "tas5828", TAS5828 },
> {}
> };
> MODULE_DEVICE_TABLE(i2c, tasdevice_id);
> @@ -126,6 +127,7 @@ static const struct of_device_id tasdevice_of_match[] = {
> { .compatible = "ti,tas2781" },
> { .compatible = "ti,tas5825" },
> { .compatible = "ti,tas5827" },
> + { .compatible = "ti,tas5828" },
> {},
> };
> MODULE_DEVICE_TABLE(of, tasdevice_of_match);
> @@ -1665,7 +1667,7 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
> }
> tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
>
> - /* There is no calibration required for TAS5825/TAS5827. */
> + /* There is no calibration required for TAS5825/TAS5827/TAS5828. */
> if (tas_priv->chip_id < TAS5825) {
> ret = tasdevice_create_cali_ctrls(tas_priv);
> if (ret) {
> @@ -1722,6 +1724,7 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
> case TAS2781:
> case TAS5825:
> case TAS5827:
> + case TAS5828:
> /* If DSP FW fail, DSP kcontrol won't be created. */
> tasdevice_dsp_remove(tas_priv);
> }
> @@ -1884,6 +1887,7 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec)
> break;
> case TAS5825:
> case TAS5827:
> + case TAS5828:
> p = (struct snd_kcontrol_new *)tas5825_snd_controls;
> size = ARRAY_SIZE(tas5825_snd_controls);
> break;
> @@ -2056,6 +2060,7 @@ static const struct acpi_device_id tasdevice_acpi_match[] = {
> { "TXNW2781", TAS2781 },
> { "TXNW5825", TAS5825 },
> { "TXNW5827", TAS5827 },
> + { "TXNW5828", TAS5828 },
> {},
> };
>
> --
> 2.25.1
>
prev parent reply other threads:[~2025-09-26 18:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-26 4:33 [PATCH v2 1/2] ASoC: tas2781: Add tas5828 support Baojun Xu
2025-09-26 12:40 ` Mark Brown
[not found] ` <20250926043339.8419-2-baojun.xu@ti.com>
2025-09-26 12:40 ` [PATCH v2 2/2] " Mark Brown
2025-09-26 18:13 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ldm1axql.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=13916275206@139.com \
--cc=alsa-devel@alsa-project.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=baojun.xu@ti.com \
--cc=broonie@kernel.org \
--cc=chinkaiting@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=henry.lo@ti.com \
--cc=jesse-ji@ti.com \
--cc=jim.shil@goertek.com \
--cc=k-yi@ti.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=robh@kernel.org \
--cc=robinchen@ti.com \
--cc=shenghao-ding@ti.com \
--cc=toastcheng@google.com \
--cc=will-wang@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).