From: Takashi Iwai <tiwai@suse.de>
To: "Gonçalo Miranda" <me@goncalom.dev>
Cc: alsa-devel@alsa-project.org, perex@perex.cz
Subject: Re: [PATCH] ALSA: hda/conexant: Add quirk for Acer Aspire Go 16 mic mute LED
Date: Mon, 12 Oct 2026 09:41:52 +0200 [thread overview]
Message-ID: <87wlrngybj.wl-tiwai@suse.de> (raw)
In-Reply-To: <20261011113709.25174-1-me@goncalom.dev>
On Sun, 11 Oct 2026 13:37:09 +0200,
Gonçalo Miranda wrote:
>
> The Acer Aspire Go 16 (AG16-71P) uses a Conexant SN6180 codec
> (subsystem ID 0x1025:0x1937) with the microphone mute LED wired
> to GPIO4. Add a quirk entry so the kernel drives the LED in sync
> with the microphone mute state.
>
> The fixup reuses the existing cxt_setup_mute_led() helper with
> mask 0x10, matching the behavior verified on the hardware.
>
> Signed-off-by: Gonçalo Miranda <me@goncalom.dev>
> ---
> sound/hda/codecs/conexant.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/sound/hda/codecs/conexant.c b/sound/hda/codecs/conexant.c
> index 40da2832b..f66bae098 100644
> --- a/sound/hda/codecs/conexant.c
> +++ b/sound/hda/codecs/conexant.c
> @@ -283,6 +283,7 @@ enum {
> CXT_FIXUP_HP_SPECTRE,
> CXT_FIXUP_HP_GATE_MIC,
> CXT_FIXUP_MUTE_LED_GPIO,
> + CXT_FIXUP_ACER_ASPIRE_GO_MUTE_LED,
> CXT_FIXUP_HP_ELITEONE_OUT_DIS,
> CXT_FIXUP_HP_ZBOOK_MUTE_LED,
> CXT_FIXUP_HEADSET_MIC,
> @@ -786,6 +787,13 @@ static void cxt_fixup_hp_zbook_mute_led(struct hda_codec *codec,
> cxt_setup_mute_led(codec, 0x10, 0x20);
> }
>
> +static void cxt_fixup_acer_aspire_go_mute_led(struct hda_codec *codec,
> + const struct hda_fixup *fix, int action)
> +{
> + if (action == HDA_FIXUP_ACT_PRE_PROBE)
> + cxt_setup_mute_led(codec, 0, 0x10);
> +}
> +
> static void cxt_fixup_hp_a_u(struct hda_codec *codec,
> const struct hda_fixup *fix, int action)
> {
> @@ -985,6 +993,10 @@ static const struct hda_fixup cxt_fixups[] = {
> .type = HDA_FIXUP_FUNC,
> .v.func = cxt_fixup_mute_led_gpio,
> },
> + [CXT_FIXUP_ACER_ASPIRE_GO_MUTE_LED] = {
> + .type = HDA_FIXUP_FUNC,
> + .v.func = cxt_fixup_acer_aspire_go_mute_led,
> + },
> [CXT_FIXUP_HP_ELITEONE_OUT_DIS] = {
> .type = HDA_FIXUP_FUNC,
> .v.func = cxt_fixup_update_pinctl,
> @@ -1098,6 +1110,7 @@ static const struct hda_quirk cxt5066_fixups[] = {
> SND_PCI_QUIRK(0x103c, 0x82b4, "HP ProDesk 600 G3", CXT_FIXUP_HP_MIC_NO_PRESENCE),
> SND_PCI_QUIRK(0x103c, 0x836e, "HP ProBook 455 G5", CXT_FIXUP_MUTE_LED_GPIO),
> SND_PCI_QUIRK(0x103c, 0x837f, "HP ProBook 470 G5", CXT_FIXUP_MUTE_LED_GPIO),
> + SND_PCI_QUIRK(0x1025, 0x1937, "Acer Aspire Go 16", CXT_FIXUP_ACER_ASPIRE_GO_MUTE_LED),
> SND_PCI_QUIRK(0x103c, 0x83b2, "HP EliteBook 840 G5", CXT_FIXUP_HP_DOCK),
> SND_PCI_QUIRK(0x103c, 0x83b3, "HP EliteBook 830 G5", CXT_FIXUP_HP_DOCK),
> SND_PCI_QUIRK(0x103c, 0x83d3, "HP ProBook 640 G4", CXT_FIXUP_HP_DOCK),
The fixup table is sorted in PCI SSID order. Please put the new entry
at the right position.
Also, the correct place for the sound kernel patch submission is
linux-sound ML (linux-sound@vger.kernel.org) instead of alsa-devel ML.
The latter is only for user-space stuff now. Please resubmit to the
former ML, instead.
thanks,
Takashi
parent reply other threads:[~2026-10-12 7:42 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20261011113709.25174-1-me@goncalom.dev>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wlrngybj.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=me@goncalom.dev \
--cc=perex@perex.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox