Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Almohanad Fayez <alfayez@aol.com>
To: peter.ujfalusi@ti.com
Cc: alsa-devel@alsa-project.org
Subject: Re: TWL4030 Line In/Out Loopback issue
Date: Tue, 9 Aug 2011 12:12:24 -0400 (EDT)	[thread overview]
Message-ID: <8CE24C642AF4E38-1784-AED3@Webmail-d107.sysops.aol.com> (raw)
In-Reply-To: <7043327.t1Ga8nN19U@barack>


 
Péter,

 Using "amixer -c0" I was able to find that Digital Loopback was set 86% I set it to 0 and now everything works great!  Thanks for your help I didn't realize that alsamixer doesn't reveal all the controls.  Regarding the dapm_widget values, I copied them without running play nor record the reason being I was hearing the Loopbacked audio without having to run any utilities.  I'm including the new dapm_widget output during record after I set the Loopback value to 0.

Thanks again for your help I really appreciate it.

al fayez



 root@usrp-e1xx:~# cat /sys/devices/platform/soc-audio/TWL4030/dapm_widget 
Headset Mic Bias: Off
Mic Bias 2: Off
Mic Bias 1: Off
micbias2 select: Off
micbias1 select: Off
Digimic1 Enable: Off
Digimic0 Enable: Off
ADC Physical Right: On
ADC Physical Left: On
Analog Right: On
Analog Left: On
ADC Virtual Right2: On
ADC Virtual Left2: On
ADC Virtual Right1: On
ADC Virtual Left1: On
HandsfreeR PGA: Off
HandsfreeL PGA: Off
CarkitR PGA: Off
CarkitR Mixer: Off
CarkitL PGA: Off
CarkitL Mixer: Off
HeadsetR PGA: Off
HeadsetR Mixer: Off
HeadsetL PGA: Off
HeadsetL Mixer: Off
PredriveR PGA: Off
PredriveR Mixer: Off
PredriveL PGA: Off
PredriveL Mixer: Off
Earpiece PGA: Off
Earpiece Mixer: Off
AIF Enable: On
APLL Enable: Off
Analog Voice Playback Mixer: Off
Analog L2 Playback Mixer: Off
Analog R2 Playback Mixer: Off
Analog L1 Playback Mixer: Off
Analog R1 Playback Mixer: Off
Digital Voice Playback Mixer: Off
Digital L2 Playback Mixer: Off
Digital R2 Playback Mixer: Off
Digital L1 Playback Mixer: Off
Digital R1 Playback Mixer: Off
FM Loop Enable: Off
DAC Voice: Off
DAC Left2: Off
DAC Right2: Off
DAC Left1: Off
DAC Right1: Off
PM State: On


 

-----Original Message-----
From: Péter Ujfalusi <peter.ujfalusi@ti.com>
To: Almohanad Fayez <alfayez@aol.com>
Cc: alsa-devel <alsa-devel@alsa-project.org>
Sent: Tue, Aug 9, 2011 2:40 am
Subject: Re: Re: [alsa-devel] TWL4030 Line In/Out Loopback issue


On Monday 08 August 2011 17:01:11 Almohanad Fayez wrote:
>  Péter,
> 
> I can't seem to find a Left/Right Digital Loopback the mention of a loop I
> found is an FM Loop Enable.  The following is the dapm_widget enable output
> from my Gumstix Overo running the 2.6.38 Kernel.  Thanks for your help.

Look for the control:
amixer -c0

Look for the Left/Right Digital Loopback in the list, and check the value

> root@usrp-e1xx:~# cat /sys/devices/platform/soc-audio/TWL4030/dapm_widget
> Headset Mic Bias: Off
> Mic Bias 2: Off
> Mic Bias 1: Off
> micbias2 select: Off
> micbias1 select: Off
> Digimic1 Enable: Off
> Digimic0 Enable: Off
> ADC Physical Right: On
> ADC Physical Left: On
> Analog Right: On
> Analog Left: On
> ADC Virtual Right2: Off
> ADC Virtual Left2: Off
> ADC Virtual Right1: Off
> ADC Virtual Left1: Off
> HandsfreeR PGA: Off
> HandsfreeL PGA: Off
> CarkitR PGA: Off
> CarkitR Mixer: Off
> CarkitL PGA: Off
> CarkitL Mixer: Off
> HeadsetR PGA: On
> HeadsetR Mixer: On
> HeadsetL PGA: On
> HeadsetL Mixer: On
> PredriveR PGA: Off
> PredriveR Mixer: Off
> PredriveL PGA: Off
> PredriveL Mixer: Off
> Earpiece PGA: Off
> Earpiece Mixer: Off
> AIF Enable: On
> APLL Enable: Off
> Analog Voice Playback Mixer: Off
> Analog L2 Playback Mixer: On
> Analog R2 Playback Mixer: On
> Analog L1 Playback Mixer: Off
> Analog R1 Playback Mixer: Off
> Digital Voice Playback Mixer: Off
> Digital L2 Playback Mixer: On
> Digital R2 Playback Mixer: On
> Digital L1 Playback Mixer: Off
> Digital R1 Playback Mixer: Off
> FM Loop Enable: Off
> DAC Voice: Off
> DAC Left2: Off
> DAC Right2: Off
> DAC Left1: Off
> DAC Right1: Off
> PM State: On

Hrm,
It does seams that the digital loopback is enabled from this.
You had only capture running while taken this, right?

-- 
Péter

 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

      reply	other threads:[~2011-08-09 16:12 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-08  0:27 TWL4030 Line In/Out Loopback issue Almohanad Fayez
2011-08-08  8:56 ` Péter Ujfalusi
2011-08-08 15:01   ` Almohanad Fayez
2011-08-09  6:40     ` Péter Ujfalusi
2011-08-09 16:12       ` Almohanad Fayez [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8CE24C642AF4E38-1784-AED3@Webmail-d107.sysops.aol.com \
    --to=alfayez@aol.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=peter.ujfalusi@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox