From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001017]: Front panel headphone and mic inverted
Date: Wed, 1 Mar 2006 01:05:19 +0100 [thread overview]
Message-ID: <8b3f70b070195d0ac6510faea7fe8cee@bugtrack.alsa-project.org> (raw)
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1017>
======================================================================
Reported By: michele
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1017
Category: PCI - azx
Reproducibility: always
Severity: minor
Priority: normal
Status: closed
Distribution:
Kernel Version:
Resolution: open
Fixed in Version:
======================================================================
Date Submitted: 03-25-2005 19:38 CET
Last Modified: 03-01-2006 01:05 CET
======================================================================
Summary: Front panel headphone and mic inverted
Description:
Using the CVS version (March 25 2005) I noticed that the headphone and the
mic jack have to be inverted (with respect to plug colors). This may
address the issue presented as "0000790: no sound with azx driver in
Realtek integrated sound chip".
I've got a P5GD1 (i915) asus mainboard, with an ALC861 codec.
lspci:
0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL
Processor to I/O Controller (rev 04)
0000:00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL PCI
Express Root Port (rev 04)
0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller (rev 03)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC
Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW)
SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 03)
0000:01:03.0 Unknown mass storage controller: Integrated Technology
Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (PCI version
seems to be IT8212, embedded seems (rev 13)
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit
Ethernet Controller (rev 15)
0000:04:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60
[Radeon X300 (PCIE)]
0000:04:00.1 Display controller: ATI Technologies Inc: Unknown device
5b70
lspci -nv
0000:00:1b.0 Class 0403: 8086:2668 (rev 03)
Subsystem: 1043:814e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d7cf4000 (64-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [70] #10 [0091]
The 1043:814e seems not to be listed in patch_realtek.c.
I also noticed that there is no "Master" volume control.
Thank you very much,
Michele
======================================================================
----------------------------------------------------------------------
rlrevell - 12-30-05 04:05
----------------------------------------------------------------------
Any improvement with later releases?
Issue History
Date Modified Username Field Change
======================================================================
03-25-05 19:38 michele New Issue
12-30-05 04:05 rlrevell Note Added: 0007199
03-01-06 01:05 rlrevell Status new => closed
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
next reply other threads:[~2006-03-01 0:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-01 0:05 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-12-30 3:05 [ALSA - driver 0001017]: Front panel headphone and mic inverted bugtrack
2005-03-25 18:38 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8b3f70b070195d0ac6510faea7fe8cee@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox