From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000589]: ICH5 S/PDIF audio drops out occasionally
Date: Wed, 24 Nov 2004 18:07:51 +0100 [thread overview]
Message-ID: <92c44f2fa6c7140d9174bc6aa355b651@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=589>
======================================================================
Reported By: squarooticus
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 589
Category: PCI - intel8x0
Reproducibility: always
Severity: minor
Priority: normal
Status: new
Distribution: Debian Unstable (sid)
Kernel Version: 2.6.7
======================================================================
Date Submitted: 10-21-2004 02:42 CEST
Last Modified: 11-24-2004 18:07 CET
======================================================================
Summary: ICH5 S/PDIF audio drops out occasionally
Description:
I'm using the on-board audio of my Abit IC7-MAX3 ("Intel Corp. 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)") with ALSA driver
snd_intel8x0 for my home theater setup. In every application I've tried,
which includes mythtv, xine, and ogg123, through both native alsa and OSS
emulation, the audio output from the S/PDIF port drops out for a second
every so often---maybe once a minute, or every few minutes; it's not
periodic.
I don't know whether analog output also drops out, since I don't have
analog output hooked up or enabled.
This is with the CVS build as of October 19. My asound.conf is:
pcm.krose-dmix {
type dmix
ipc_key 3516
ipc_key_add_uid yes
slave {
pcm "hw:0,4"
period_time 0
period_size 4096
#buffer_size 16384
buffer_size 131072
period_time 84000
buffer_time 340000
rate 48000
channels 2
}
bindings.0 0
bindings.1 1
}
pcm.dsp0 {
type plug
slave.pcm "krose-dmix"
}
ctl.mixer0 {
type hw
card 0
}
pcm.!default {
type plug
slave.pcm "krose-dmix"
}
I can't find any options to compile in debug logging: I'm not really sure
what the cause of the drop out is, e.g., buffer underrun, PCI contention,
etc. I'm happy to spend time to try to debug this, but I need a starting
point.
Of course, it'd also be great to know if anyone has ever seen this kind of
behavior before. I don't believe the SPD/IF port is turning itself off
because the receiver doesn't blip, which normally it would if the input
were to disappear temporarily.
The CPU is a 3.2G P4 with hyperthreading turned on. I never see the CPU
usage go above 50%.
Interestingly, I see similar behavior on my dual Opteron machine with an
AMD-8111 audio controller using the same driver (snd_intel8x0). I never
had this problem with the emu10k1 driver when I was using SB Lives, but I
have run into PCI slot limitations in my HTPC, so I have to use mobo
audio.
Suggestions?
======================================================================
----------------------------------------------------------------------
squarooticus - 11-24-04 17:55
----------------------------------------------------------------------
I've been trolling around the abit forums, and I found this:
http://forum.abit-usa.com/showthread.php?s=&threadid=37896&highlight=ic7max3+sound+cuts+out
There are several other posts indicating similar problems. What do you
make of this? Is my motherboard just b0rk3d?
----------------------------------------------------------------------
squarooticus - 11-24-04 18:07
----------------------------------------------------------------------
Here's another thread:
http://forum.abit-usa.com/showthread.php?s=&threadid=58064&highlight=ic7max3+sound+drops+out
This makes it sound like there's a software workaround for this.
Issue History
Date Modified Username Field Change
======================================================================
10-21-04 02:42 squarooticus New Issue
10-21-04 02:42 squarooticus Distribution => Debian Unstable (sid)
10-21-04 02:42 squarooticus Kernel Version => 2.6.7
10-21-04 23:40 squarooticus Issue Monitored: squarooticus
10-27-04 16:54 squarooticus Note Added: 0002275
11-10-04 12:26 tiwai Note Added: 0002367
11-12-04 06:23 squarooticus Note Added: 0002392
11-15-04 20:24 squarooticus Note Added: 0002419
11-16-04 02:50 squarooticus Note Added: 0002423
11-16-04 05:14 squarooticus Note Added: 0002424
11-18-04 17:51 tiwai Note Added: 0002452
11-24-04 16:33 squarooticus Note Added: 0002571
11-24-04 17:55 squarooticus Note Added: 0002575
11-24-04 18:07 squarooticus Note Added: 0002577
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
next reply other threads:[~2004-11-24 17:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-24 17:07 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-12-31 3:03 [ALSA - driver 0000589]: ICH5 S/PDIF audio drops out occasionally bugtrack
2005-04-09 15:08 bugtrack
2004-11-24 16:55 bugtrack
2004-11-24 15:33 bugtrack
2004-11-18 16:51 bugtrack
2004-11-16 4:14 bugtrack
2004-11-16 1:50 bugtrack
2004-11-15 19:24 bugtrack
2004-11-12 5:23 bugtrack
2004-11-10 11:26 bugtrack
2004-10-27 14:54 bugtrack
2004-10-21 0:42 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=92c44f2fa6c7140d9174bc6aa355b651@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox