From: Keyon Jie <yang.jie@linux.intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH 1/2] ALSA: hda: Fix mismatches for register mask and value in hdac controller
Date: Wed, 9 Jan 2019 17:43:11 +0800 [thread overview]
Message-ID: <93f7bc20-604c-da44-6bda-64785277e819@linux.intel.com> (raw)
In-Reply-To: <s5h1s5mi3dp.wl-tiwai@suse.de>
On 2019/1/9 下午5:31, Takashi Iwai wrote:
> On Wed, 09 Jan 2019 09:20:50 +0100,
> Keyon Jie wrote:
>>
>> E.g. for azx_int_enable(), we should set both mask and value to be
>> "AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN"(the mask was 0) to enable
>> controller CIE and GIE.
>>
>> We have similar issues on setting AZX_GCTL_RESET and AZX_GCTL_UNSOL,
>> here try to correct all of them.
>>
>> Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
>
> Well, the current code isn't incorrect, it serves for its purpose --
> set the given bits. But yeah it's clearer to pass the mask bits
Yes, I realized that after patches sent out, and that explains why there
is no failure ever reported about it.
Thanks,
~Keyon
> explicitly.
>
> So I queued these two patches to for-next branch, for 5.1 kernel.
>
>
> thanks,
>
> Takashi
>
>
>> ---
>> sound/hda/hdac_controller.c | 8 +++++---
>> 1 file changed, 5 insertions(+), 3 deletions(-)
>>
>> diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
>> index 74244d8e2909..b2e9454f5816 100644
>> --- a/sound/hda/hdac_controller.c
>> +++ b/sound/hda/hdac_controller.c
>> @@ -376,7 +376,7 @@ void snd_hdac_bus_exit_link_reset(struct hdac_bus *bus)
>> {
>> unsigned long timeout;
>>
>> - snd_hdac_chip_updateb(bus, GCTL, 0, AZX_GCTL_RESET);
>> + snd_hdac_chip_updateb(bus, GCTL, AZX_GCTL_RESET, AZX_GCTL_RESET);
>>
>> timeout = jiffies + msecs_to_jiffies(100);
>> while (!snd_hdac_chip_readb(bus, GCTL) && time_before(jiffies, timeout))
>> @@ -415,7 +415,7 @@ int snd_hdac_bus_reset_link(struct hdac_bus *bus, bool full_reset)
>> }
>>
>> /* Accept unsolicited responses */
>> - snd_hdac_chip_updatel(bus, GCTL, 0, AZX_GCTL_UNSOL);
>> + snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_UNSOL, AZX_GCTL_UNSOL);
>>
>> /* detect codecs */
>> if (!bus->codec_mask) {
>> @@ -431,7 +431,9 @@ EXPORT_SYMBOL_GPL(snd_hdac_bus_reset_link);
>> static void azx_int_enable(struct hdac_bus *bus)
>> {
>> /* enable controller CIE and GIE */
>> - snd_hdac_chip_updatel(bus, INTCTL, 0, AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN);
>> + snd_hdac_chip_updatel(bus, INTCTL,
>> + AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN,
>> + AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN);
>> }
>>
>> /* disable interrupts */
>> --
>> 2.17.1
>>
>>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
prev parent reply other threads:[~2019-01-09 9:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-09 8:20 [PATCH 1/2] ALSA: hda: Fix mismatches for register mask and value in hdac controller Keyon Jie
2019-01-09 8:20 ` [PATCH 2/2] ALSA: hda: Fix a mask wrong issue in snd_hdac_stream_start() Keyon Jie
2019-01-09 9:31 ` [PATCH 1/2] ALSA: hda: Fix mismatches for register mask and value in hdac controller Takashi Iwai
2019-01-09 9:43 ` Keyon Jie [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=93f7bc20-604c-da44-6bda-64785277e819@linux.intel.com \
--to=yang.jie@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox