From: Grzegorz Orciuch <g.orciuch@gmail.com>
To: alsa-devel@alsa-project.org
Subject: snd-bt87x unknown soundcard, detected but no sound.
Date: Wed, 23 Mar 2011 11:26:46 +0100 [thread overview]
Message-ID: <AANLkTim0UEfH619Kzufdfr1Xi6Y-GbtApK7Zgwe7WGgT@mail.gmail.com> (raw)
Hi,
I've the TV card which is Kworld KW-TV878RF and tv module bttv gives
the vision well.
It registers also the sound device in lspci -vv:
----
01:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-----
then I load the module snd-bt87x with no argument, then it says the
card is not detected.
Then I load the module as "modprobe snd-bt87x load_all=1
digital_rate=44100" (also 32k is not giving sound)
----
ALSA sound/pci/bt87x.c:866: unknown card 0x878-0x00:0x00
ALSA sound/pci/bt87x.c:869: please mail id, board name, and, if it
works, the correct digital_rate option to
<alsa-devel@alsa-project.org>
Bt87x 0000:01:08.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ALSA sound/pci/bt87x.c:937: bt87x0: Using board 0, analog, digital
(rate 44100 Hz)
-----
Can you somehow help me ? Now I'm going to connect audio-out with
soundblaster line-in, as workaround.
BR,
Gregory
reply other threads:[~2011-03-23 10:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTim0UEfH619Kzufdfr1Xi6Y-GbtApK7Zgwe7WGgT@mail.gmail.com \
--to=g.orciuch@gmail.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).