Re: [PATCH v5 1/9] davinci: EMAC support for Omapl138-Hawkboard

[Victor Rodriguez <vm.rod25@gmail.com>]

On Thu, Oct 28, 2010 at 10:54 AM, Sergei Shtylyov <sshtylyov@mvista.com> wrote:
> Hello.
>
> On 28-10-2010 18:04, Nori, Sekhar wrote:
>
>> Sorry for jumping late on this. Some comments below:
>
>>> From: Victor Rodriguez<victor.rodriguez@sasken.com>
>
>>> This patch adds EMAC support for the Hawkboard-L138 system
>
>>> Signed-off-by: Victor Rodriguez<victor.rodriguez@sasken.com>
>>> ---
>>>  arch/arm/mach-davinci/board-omapl138-hawk.c |   47
>>> +++++++++++++++++++++++++++
>>>  1 files changed, 47 insertions(+), 0 deletions(-)
>
>>> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> b/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> index c472dd8..8633245 100644
>>> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
>>> @@ -19,6 +19,51 @@
>>>
>>>  #include<mach/cp_intc.h>
>>>  #include<mach/da8xx.h>
>>> +#include<mach/mux.h>
>>> +
>>> +#define HAWKBOARD_PHY_ID             "0:07"
>>> +
>>> +static short omapl138_hawk_mii_pins[] __initdata = {
>>> +     DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
>>> +     DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
>>> +     DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
>>> +     DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
>>> +     DA850_MDIO_D,
>>> +     -1
>
>> -1 need not be a new line. In any case, please include a ',' after it.
>
>   Why is that? It's always a last entry in the array.
>
> WBR, Sergei
>

Hey Sergei these patches have been tested by Rene Gonzales and ack by
Liam and Mark Brown , I am going to send the patches V6 because of
this change. I have been rechecking the code and seems that there is
no problem on it, do you have any other comment before i send the
series of patches v6 ?

Thanks a lot for your comments

Really appreciated

Victor Rodriguez