alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Wang Xingchao <wangxingchao2011@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: anssi.hannula@iki.fi, alsa-devel@alsa-project.org,
	alanwww1@xbmc.org, fengguang.wu@intel.com,
	Wang Xingchao <xingchao.wang@intel.com>
Subject: Re: [PATCH 0/3] HDMI HBR(High Bit Rate) Feature bug fix for Intel's Chips
Date: Wed, 5 Sep 2012 14:34:35 +0800	[thread overview]
Message-ID: <CA+v+29hkd=WA2=EB-==33+rW1-baGRXM=bbpCTJGX2EDgkY3eQ@mail.gmail.com> (raw)
In-Reply-To: <s5hk3w9j816.wl%tiwai@suse.de>

2012/9/5 Takashi Iwai <tiwai@suse.de>:
> At Wed,  5 Sep 2012 13:58:35 +0800,
> Wang Xingchao wrote:
>>
>> Please Note This patchset has not been tested yet on any Hardware platform.
>> i could only confirm there's no compile error. :)
>> I test previous single patch on the Yamaha A/V receiver which works well, the
>> test results was also confirmed by some guys from XBMC forum.
>>
>> The idea of this patch comes from Anssi, Big credit to him at first!
>>
>> Any comments are appreciated!
>>
>> Changelog:
>> * do not touch channel_allocation priority order, use new api to get
>> correct channels number
>> * use spdif->status to check audio type, pcm or non-pcm
>> * create new non_pcm_mapping[] for non_pcm audio in seperate block
>> * add non_pcm hdmi_spec_per_cvt to remember previous audio type, used to
>>   determine whether need a channel mapping update during the pcm/non-pcm
>>   stream switch with same channel number.
>>
>>
>> Wang Xingchao (3):
>>   ALSA: hdmi - fix channel_allocation array wrong order
>>   ALSA: HDMI - Enable HBR feature on Intel chips
>>   ALSA: HDMI - Setup channel mapping for non_pcm audio
>
> The patches look good to me.  Maybe you can unify the subject line
> prefix (either lower or upper case), though :)
>

Okay. And I will let you know after the patches are tested, this may
take some time. :(

thanks
--xingchao

>
> thanks,
>
> Takashi
>
>>
>>  sound/pci/hda/patch_hdmi.c |   56 ++++++++++++++++++++++++++++++++++++++++----
>>  1 file changed, 51 insertions(+), 5 deletions(-)
>>
>> --
>> 1.7.9.5
>>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2012-09-05  6:34 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-05  5:58 [PATCH 0/3] HDMI HBR(High Bit Rate) Feature bug fix for Intel's Chips Wang Xingchao
2012-09-05  5:58 ` [PATCH RFC 1/3] ALSA: hdmi - fix channel_allocation array wrong order Wang Xingchao
2012-09-05  5:58 ` [PATCH RFC 2/3] ALSA: HDMI - Enable HBR feature on Intel chips Wang Xingchao
2012-09-05  5:58 ` [PATCH RFC 3/3] ALSA: HDMI - Setup channel mapping for non_pcm audio Wang Xingchao
2012-09-05  6:30 ` [PATCH 0/3] HDMI HBR(High Bit Rate) Feature bug fix for Intel's Chips Takashi Iwai
2012-09-05  6:34   ` Wang Xingchao [this message]
  -- strict thread matches above, loose matches on Subject: below --
2012-09-06  2:02 Wang Xingchao
2012-09-06  6:53 ` Takashi Iwai
2012-09-06 16:00   ` Takashi Iwai
2012-09-07  1:32     ` Wang, Xingchao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+v+29hkd=WA2=EB-==33+rW1-baGRXM=bbpCTJGX2EDgkY3eQ@mail.gmail.com' \
    --to=wangxingchao2011@gmail.com \
    --cc=alanwww1@xbmc.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=anssi.hannula@iki.fi \
    --cc=fengguang.wu@intel.com \
    --cc=tiwai@suse.de \
    --cc=xingchao.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).