alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH] fm801: move to pcim_* and devm_* functions
Date: Wed, 7 Jan 2015 12:54:40 +0200	[thread overview]
Message-ID: <CAHp75Veya0h7E_dDCXEsUvqFp+=LCk_4PDbV_REUMc1_Ro9W=Q@mail.gmail.com> (raw)
In-Reply-To: <s5h8uhfdq0g.wl-tiwai@suse.de>

On Wed, Jan 7, 2015 at 9:11 AM, Takashi Iwai <tiwai@suse.de> wrote:
> At Wed,  7 Jan 2015 01:40:17 +0200,
> Andy Shevchenko wrote:
>>
>> The managed functions allow to get ->probe() and ->remove() simplier.
>> This patch converts code to use managed functions.
>
> This doesn't work well because of the order of release calls in
> device_release().  devres_release_all() is called at first before
> anything else.  Thus the card's free callback would be called after
> it, and snd_fm801_free() touches the hardware before disabling.
>

Hmm… I didn't get what make those calls. Sound core? The driver is a
normal PCI driver, so resources will be freed *after* ->remove() of
driver was called.
Please, elaborate.

>
> Takashi
>
>> While here remove the dead code and fix the value printed in error
>> message.
>>
>> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>> ---
>>  sound/pci/fm801.c | 29 +++++++----------------------
>>  1 file changed, 7 insertions(+), 22 deletions(-)
>>
>> diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
>> index dcda3c1..2708500 100644
>> --- a/sound/pci/fm801.c
>> +++ b/sound/pci/fm801.c
>> @@ -1178,12 +1178,8 @@ static int snd_fm801_free(struct fm801 *chip)
>>               v4l2_device_unregister(&chip->v4l2_dev);
>>       }
>>  #endif
>> -     if (chip->irq >= 0)
>> -             free_irq(chip->irq, chip);
>>       pci_release_regions(chip->pci);
>> -     pci_disable_device(chip->pci);
>>
>> -     kfree(chip);
>>       return 0;
>>  }
>>
>> @@ -1206,28 +1202,23 @@ static int snd_fm801_create(struct snd_card *card,
>>       };
>>
>>       *rchip = NULL;
>> -     if ((err = pci_enable_device(pci)) < 0)
>> +     if ((err = pcim_enable_device(pci)) < 0)
>>               return err;
>> -     chip = kzalloc(sizeof(*chip), GFP_KERNEL);
>> -     if (chip == NULL) {
>> -             pci_disable_device(pci);
>> +     chip = devm_kzalloc(&pci->dev, sizeof(*chip), GFP_KERNEL);
>> +     if (chip == NULL)
>>               return -ENOMEM;
>> -     }
>>       spin_lock_init(&chip->reg_lock);
>>       chip->card = card;
>>       chip->pci = pci;
>>       chip->irq = -1;
>>       chip->tea575x_tuner = tea575x_tuner;
>> -     if ((err = pci_request_regions(pci, "FM801")) < 0) {
>> -             kfree(chip);
>> -             pci_disable_device(pci);
>> +     if ((err = pci_request_regions(pci, "FM801")) < 0)
>>               return err;
>> -     }
>>       chip->port = pci_resource_start(pci, 0);
>>       if ((tea575x_tuner & TUNER_ONLY) == 0) {
>> -             if (request_irq(pci->irq, snd_fm801_interrupt, IRQF_SHARED,
>> -                             KBUILD_MODNAME, chip)) {
>> -                     dev_err(card->dev, "unable to grab IRQ %d\n", chip->irq);
>> +             if (devm_request_irq(&pci->dev, pci->irq, snd_fm801_interrupt,
>> +                             IRQF_SHARED, KBUILD_MODNAME, chip)) {
>> +                     dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
>>                       snd_fm801_free(chip);
>>                       return -EBUSY;
>>               }
>> @@ -1242,12 +1233,6 @@ static int snd_fm801_create(struct snd_card *card,
>>       /* init might set tuner access method */
>>       tea575x_tuner = chip->tea575x_tuner;
>>
>> -     if (chip->irq >= 0 && (tea575x_tuner & TUNER_ONLY)) {
>> -             pci_clear_master(pci);
>> -             free_irq(chip->irq, chip);
>> -             chip->irq = -1;
>> -     }
>> -
>>       if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
>>               snd_fm801_free(chip);
>>               return err;
>> --
>> 1.8.3.101.g727a46b
>>



-- 
With Best Regards,
Andy Shevchenko
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  reply	other threads:[~2015-01-07 10:54 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-06 23:40 [PATCH] fm801: move to pcim_* and devm_* functions Andy Shevchenko
2015-01-07  7:11 ` Takashi Iwai
2015-01-07 10:54   ` Andy Shevchenko [this message]
2015-01-07 11:27     ` Takashi Iwai
2015-01-07 12:20       ` Andy Shevchenko
2015-01-07 13:12         ` Takashi Iwai
2015-01-07 13:27           ` Andy Shevchenko
2015-01-07 13:31             ` Takashi Iwai
2015-01-07 13:40               ` Andy Shevchenko
2015-01-07 13:43                 ` Takashi Iwai
2015-01-07 13:57                   ` Takashi Iwai
2015-01-07 14:25                     ` Andy Shevchenko
2015-01-07 14:59                       ` Takashi Iwai
2015-01-20 12:42                         ` Takashi Iwai
2015-01-20 13:46                           ` Andy Shevchenko
2015-01-20 13:48                             ` Takashi Iwai
2015-01-20 13:51                               ` Andy Shevchenko
2015-01-20 13:56                                 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHp75Veya0h7E_dDCXEsUvqFp+=LCk_4PDbV_REUMc1_Ro9W=Q@mail.gmail.com' \
    --to=andy.shevchenko@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).